Currently, memconf-sld3.c and memconf-pxs2.c duplicate the code.
There are 3 patterns in terms of MEMCONF init:
- DRAM 2 channels: LD4, sLD8, Pro4, Pro5, LD11
- DRAM 3 channels: sLD3
- DRAM 3 channels (Ch2 is disable by MEMCONF[21]): Pxs2, LD20
All of them can be moved into a single file by a little more
refactoring.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
ifdef CONFIG_SPL_BUILD
-obj-y += init/ bcu/ memconf/
+obj-y += memconf.o
+obj-y += init/ bcu/
obj-$(CONFIG_MICRO_SUPPORT_CARD) += sbc/
else
int uniphier_sld3_bcu_init(const struct uniphier_board_data *bd);
int uniphier_ld4_bcu_init(const struct uniphier_board_data *bd);
-int memconf_init(const struct uniphier_board_data *bd);
-int uniphier_sld3_memconf_init(const struct uniphier_board_data *bd);
-int uniphier_pxs2_memconf_init(const struct uniphier_board_data *bd);
+int uniphier_memconf_2ch_init(const struct uniphier_board_data *bd);
+int uniphier_memconf_3ch_no_disbit_init(const struct uniphier_board_data *bd);
+int uniphier_memconf_3ch_init(const struct uniphier_board_data *bd);
int uniphier_sld3_dpll_init(const struct uniphier_board_data *bd);
int uniphier_ld4_dpll_init(const struct uniphier_board_data *bd);
led_puts("L0");
- memconf_init(bd);
+ uniphier_memconf_2ch_init(bd);
led_puts("L1");
led_puts("L0");
- memconf_init(bd);
- uniphier_pxs2_memconf_init(bd);
+ uniphier_memconf_3ch_init(bd);
led_puts("L1");
led_puts("L0");
- memconf_init(bd);
+ uniphier_memconf_2ch_init(bd);
led_puts("L1");
led_puts("L0");
- memconf_init(bd);
+ uniphier_memconf_2ch_init(bd);
led_puts("L1");
led_puts("L0");
- memconf_init(bd);
+ uniphier_memconf_2ch_init(bd);
led_puts("L1");
led_puts("L0");
- memconf_init(bd);
- uniphier_pxs2_memconf_init(bd);
+ uniphier_memconf_3ch_init(bd);
led_puts("L1");
led_puts("L0");
- memconf_init(bd);
- uniphier_sld3_memconf_init(bd);
+ uniphier_memconf_3ch_no_disbit_init(bd);
led_puts("L1");
led_puts("L0");
- memconf_init(bd);
+ uniphier_memconf_2ch_init(bd);
led_puts("L1");
--- /dev/null
+/*
+ * Copyright (C) 2011-2015 Panasonic Corporation
+ * Copyright (C) 2016 Socionext Inc.
+ * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/sizes.h>
+
+#include "sg-regs.h"
+#include "init.h"
+
+static int __uniphier_memconf_init(const struct uniphier_board_data *bd,
+ int have_ch2, int have_ch2_disable_bit)
+{
+ u32 val = 0;
+ unsigned long size_per_word;
+
+ /* set up ch0 */
+ switch (bd->dram_ch[0].width) {
+ case 16:
+ val |= SG_MEMCONF_CH0_NUM_1;
+ size_per_word = bd->dram_ch[0].size;
+ break;
+ case 32:
+ val |= SG_MEMCONF_CH0_NUM_2;
+ size_per_word = bd->dram_ch[0].size >> 1;
+ break;
+ default:
+ pr_err("error: unsupported DRAM ch0 width\n");
+ return -EINVAL;
+ }
+
+ switch (size_per_word) {
+ case SZ_64M:
+ val |= SG_MEMCONF_CH0_SZ_64M;
+ break;
+ case SZ_128M:
+ val |= SG_MEMCONF_CH0_SZ_128M;
+ break;
+ case SZ_256M:
+ val |= SG_MEMCONF_CH0_SZ_256M;
+ break;
+ case SZ_512M:
+ val |= SG_MEMCONF_CH0_SZ_512M;
+ break;
+ case SZ_1G:
+ val |= SG_MEMCONF_CH0_SZ_1G;
+ break;
+ default:
+ pr_err("error: unsupported DRAM ch0 size\n");
+ return -EINVAL;
+ }
+
+ /* set up ch1 */
+ switch (bd->dram_ch[1].width) {
+ case 16:
+ val |= SG_MEMCONF_CH1_NUM_1;
+ size_per_word = bd->dram_ch[1].size;
+ break;
+ case 32:
+ val |= SG_MEMCONF_CH1_NUM_2;
+ size_per_word = bd->dram_ch[1].size >> 1;
+ break;
+ default:
+ pr_err("error: unsupported DRAM ch1 width\n");
+ return -EINVAL;
+ }
+
+ switch (size_per_word) {
+ case SZ_64M:
+ val |= SG_MEMCONF_CH1_SZ_64M;
+ break;
+ case SZ_128M:
+ val |= SG_MEMCONF_CH1_SZ_128M;
+ break;
+ case SZ_256M:
+ val |= SG_MEMCONF_CH1_SZ_256M;
+ break;
+ case SZ_512M:
+ val |= SG_MEMCONF_CH1_SZ_512M;
+ break;
+ case SZ_1G:
+ val |= SG_MEMCONF_CH1_SZ_1G;
+ break;
+ default:
+ pr_err("error: unsupported DRAM ch1 size\n");
+ return -EINVAL;
+ }
+
+ /* is sparse mem? */
+ if (bd->dram_ch[0].base + bd->dram_ch[0].size < bd->dram_ch[1].base)
+ val |= SG_MEMCONF_SPARSEMEM;
+
+ if (!have_ch2)
+ goto out;
+
+ if (!bd->dram_ch[2].size) {
+ if (have_ch2_disable_bit)
+ val |= SG_MEMCONF_CH2_DISABLE;
+ goto out;
+ }
+
+ /* set up ch2 */
+ switch (bd->dram_ch[2].width) {
+ case 16:
+ val |= SG_MEMCONF_CH2_NUM_1;
+ size_per_word = bd->dram_ch[2].size;
+ break;
+ case 32:
+ val |= SG_MEMCONF_CH2_NUM_2;
+ size_per_word = bd->dram_ch[2].size >> 1;
+ break;
+ default:
+ pr_err("error: unsupported DRAM ch2 width\n");
+ return -EINVAL;
+ }
+
+ switch (size_per_word) {
+ case SZ_64M:
+ val |= SG_MEMCONF_CH2_SZ_64M;
+ break;
+ case SZ_128M:
+ val |= SG_MEMCONF_CH2_SZ_128M;
+ break;
+ case SZ_256M:
+ val |= SG_MEMCONF_CH2_SZ_256M;
+ break;
+ case SZ_512M:
+ val |= SG_MEMCONF_CH2_SZ_512M;
+ break;
+ case SZ_1G:
+ val |= SG_MEMCONF_CH2_SZ_1G;
+ break;
+ default:
+ pr_err("error: unsupported DRAM ch2 size\n");
+ return -EINVAL;
+ }
+
+out:
+ writel(val, SG_MEMCONF);
+
+ return 0;
+}
+
+int uniphier_memconf_2ch_init(const struct uniphier_board_data *bd)
+{
+ return __uniphier_memconf_init(bd, 0, 0);
+}
+
+int uniphier_memconf_3ch_no_disbit_init(const struct uniphier_board_data *bd)
+{
+ return __uniphier_memconf_init(bd, 1, 0);
+}
+
+int uniphier_memconf_3ch_init(const struct uniphier_board_data *bd)
+{
+ return __uniphier_memconf_init(bd, 1, 1);
+}
+++ /dev/null
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y += memconf.o
-obj-$(CONFIG_ARCH_UNIPHIER_SLD3) += memconf-sld3.o
-obj-$(CONFIG_ARCH_UNIPHIER_PXS2) += memconf-pxs2.o
-obj-$(CONFIG_ARCH_UNIPHIER_LD6B) += memconf-pxs2.o
-obj-$(CONFIG_ARCH_UNIPHIER_LD20) += memconf-pxs2.o
+++ /dev/null
-/*
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/sizes.h>
-
-#include "../init.h"
-#include "../sg-regs.h"
-
-int uniphier_pxs2_memconf_init(const struct uniphier_board_data *bd)
-{
- u32 tmp;
- unsigned long size_per_word;
-
- tmp = readl(SG_MEMCONF);
-
- tmp &= ~(SG_MEMCONF_CH2_SZ_MASK | SG_MEMCONF_CH2_NUM_MASK);
-
- switch (bd->dram_ch[2].width) {
- case 16:
- tmp |= SG_MEMCONF_CH2_NUM_1;
- size_per_word = bd->dram_ch[2].size;
- break;
- case 32:
- tmp |= SG_MEMCONF_CH2_NUM_2;
- size_per_word = bd->dram_ch[2].size >> 1;
- break;
- default:
- pr_err("error: unsupported DRAM Ch2 width\n");
- return -EINVAL;
- }
-
- /* Set DDR size */
- switch (size_per_word) {
- case SZ_64M:
- tmp |= SG_MEMCONF_CH2_SZ_64M;
- break;
- case SZ_128M:
- tmp |= SG_MEMCONF_CH2_SZ_128M;
- break;
- case SZ_256M:
- tmp |= SG_MEMCONF_CH2_SZ_256M;
- break;
- case SZ_512M:
- tmp |= SG_MEMCONF_CH2_SZ_512M;
- break;
- case SZ_1G:
- tmp |= SG_MEMCONF_CH2_SZ_1G;
- break;
- default:
- pr_err("error: unsupported DRAM Ch2 size\n");
- return -EINVAL;
- }
-
- if (size_per_word)
- tmp &= ~SG_MEMCONF_CH2_DISABLE;
- else
- tmp |= SG_MEMCONF_CH2_DISABLE;
-
- writel(tmp, SG_MEMCONF);
-
- return 0;
-}
+++ /dev/null
-/*
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/sizes.h>
-
-#include "../init.h"
-#include "../sg-regs.h"
-
-int uniphier_sld3_memconf_init(const struct uniphier_board_data *bd)
-{
- u32 tmp;
- unsigned long size_per_word;
-
- tmp = readl(SG_MEMCONF);
-
- tmp &= ~(SG_MEMCONF_CH2_SZ_MASK | SG_MEMCONF_CH2_NUM_MASK);
-
- switch (bd->dram_ch[2].width) {
- case 16:
- tmp |= SG_MEMCONF_CH2_NUM_1;
- size_per_word = bd->dram_ch[2].size;
- break;
- case 32:
- tmp |= SG_MEMCONF_CH2_NUM_2;
- size_per_word = bd->dram_ch[2].size >> 1;
- break;
- default:
- pr_err("error: unsupported DRAM Ch2 width\n");
- return -EINVAL;
- }
-
- /* Set DDR size */
- switch (size_per_word) {
- case SZ_64M:
- tmp |= SG_MEMCONF_CH2_SZ_64M;
- break;
- case SZ_128M:
- tmp |= SG_MEMCONF_CH2_SZ_128M;
- break;
- case SZ_256M:
- tmp |= SG_MEMCONF_CH2_SZ_256M;
- break;
- case SZ_512M:
- tmp |= SG_MEMCONF_CH2_SZ_512M;
- break;
- default:
- pr_err("error: unsupported DRAM Ch2 size\n");
- return -EINVAL;
- }
-
- writel(tmp, SG_MEMCONF);
-
- return 0;
-}
+++ /dev/null
-/*
- * Copyright (C) 2011-2015 Panasonic Corporation
- * Copyright (C) 2016 Socionext Inc.
- * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/sizes.h>
-
-#include "../init.h"
-#include "../sg-regs.h"
-
-int memconf_init(const struct uniphier_board_data *bd)
-{
- u32 tmp;
- unsigned long size_per_word;
-
- tmp = readl(SG_MEMCONF);
-
- tmp &= ~(SG_MEMCONF_CH0_SZ_MASK | SG_MEMCONF_CH0_NUM_MASK);
-
- switch (bd->dram_ch[0].width) {
- case 16:
- tmp |= SG_MEMCONF_CH0_NUM_1;
- size_per_word = bd->dram_ch[0].size;
- break;
- case 32:
- tmp |= SG_MEMCONF_CH0_NUM_2;
- size_per_word = bd->dram_ch[0].size >> 1;
- break;
- default:
- pr_err("error: unsupported DRAM Ch0 width\n");
- return -EINVAL;
- }
-
- /* Set DDR size */
- switch (size_per_word) {
- case SZ_64M:
- tmp |= SG_MEMCONF_CH0_SZ_64M;
- break;
- case SZ_128M:
- tmp |= SG_MEMCONF_CH0_SZ_128M;
- break;
- case SZ_256M:
- tmp |= SG_MEMCONF_CH0_SZ_256M;
- break;
- case SZ_512M:
- tmp |= SG_MEMCONF_CH0_SZ_512M;
- break;
- case SZ_1G:
- tmp |= SG_MEMCONF_CH0_SZ_1G;
- break;
- default:
- pr_err("error: unsupported DRAM Ch0 size\n");
- return -EINVAL;
- }
-
- tmp &= ~(SG_MEMCONF_CH1_SZ_MASK | SG_MEMCONF_CH1_NUM_MASK);
-
- switch (bd->dram_ch[1].width) {
- case 16:
- tmp |= SG_MEMCONF_CH1_NUM_1;
- size_per_word = bd->dram_ch[1].size;
- break;
- case 32:
- tmp |= SG_MEMCONF_CH1_NUM_2;
- size_per_word = bd->dram_ch[1].size >> 1;
- break;
- default:
- pr_err("error: unsupported DRAM Ch1 width\n");
- return -EINVAL;
- }
-
- switch (size_per_word) {
- case SZ_64M:
- tmp |= SG_MEMCONF_CH1_SZ_64M;
- break;
- case SZ_128M:
- tmp |= SG_MEMCONF_CH1_SZ_128M;
- break;
- case SZ_256M:
- tmp |= SG_MEMCONF_CH1_SZ_256M;
- break;
- case SZ_512M:
- tmp |= SG_MEMCONF_CH1_SZ_512M;
- break;
- case SZ_1G:
- tmp |= SG_MEMCONF_CH1_SZ_1G;
- break;
- default:
- pr_err("error: unsupported DRAM Ch1 size\n");
- return -EINVAL;
- }
-
- if (bd->dram_ch[0].base + bd->dram_ch[0].size < bd->dram_ch[1].base)
- tmp |= SG_MEMCONF_SPARSEMEM;
- else
- tmp &= ~SG_MEMCONF_SPARSEMEM;
-
- writel(tmp, SG_MEMCONF);
-
- return 0;
-}
projects / u-boot.git / commitdiff