--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2021 Tianrui Wei <tianrui-wei@outlook.com> */
+
+/*
+ * This dts is for a dual core instance of OpenPiton+Ariane built
+ * to run on a Digilent Genesys 2 FPGA at 66.67MHz. These files
+ * are automatically generated by the OpenPiton build system and
+ * this configuration may not be what you need if your configuration
+ * is different from the below.
+ */
+
+/dts-v1/;
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "openpiton,riscv64";
+
+ chosen {
+ stdout-path = "uart0:115200";
+ };
+
+ aliases {
+ console = &uart0;
+ serial0 = &uart0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ timebase-frequency = <520835>;
+
+ CPU0: cpu@0 {
+ clocks = <&clk0>;
+ u-boot,dm-spl;
+ device_type = "cpu";
+ reg = <0>;
+ compatible = "openhwgroup,cva6", "riscv";
+ riscv,isa = "rv64imafdc";
+ mmu-type = "riscv,sv39";
+ tlb-split;
+ // HLIC - hart local interrupt controller
+ CPU0_intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "riscv,cpu-intc";
+ };
+ };
+
+ CPU1: cpu@1 {
+ clocks = <&clk0>;
+ device_type = "cpu";
+ reg = <1>;
+ compatible = "openhwgroup,cva6", "riscv";
+ riscv,isa = "rv64imafdc";
+ mmu-type = "riscv,sv39";
+ tlb-split;
+ // HLIC - hart local interrupt controller
+ CPU1_intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "riscv,cpu-intc";
+ };
+ };
+
+ };
+
+ clocks {
+ clk0: osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <66667000>;
+ };
+ };
+
+ memory@80000000 {
+ u-boot,dm-spl;
+ device_type = "memory";
+ reg = < 0x00000000 0x80000000 0x00000000 0x40000000 >;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "openpiton,chipset", "simple-bus";
+ ranges;
+
+ uart0: uart@fff0c2c000 {
+ compatible = "ns16550", "openpiton,ns16550";
+ reg = < 0x000000ff 0xf0c2c000 0x00000000 0x000d4000 >;
+ interrupt-parent = <&PLIC0>;
+ interrupts = <1>;
+ reg-shift = <0>;
+ // regs are spaced on 8 bit boundary
+ };
+
+ eth: ethernet@fff0d00000 {
+ compatible = "xlnx,xps-ethernetlite-1.00.a", "openpiton,ethernet";
+ device_type = "network";
+ reg = < 0x000000ff 0xf0d00000 0x00000000 0x00100000 >;
+ interrupt-parent = <&PLIC0>;
+ interrupts = <2>;
+ phy-handle = <&phy0>;
+ xlnx,duplex = <0x1>;
+ xlnx,include-global-buffers = <0x1>;
+ xlnx,include-internal-loopback = <0x0>;
+ xlnx,include-mdio = <0x1>;
+ xlnx,rx-ping-pong = <0x1>;
+ xlnx,s-axi-id-width = <0x1>;
+ xlnx,tx-ping-pong = <0x1>;
+ xlnx,use-internal = <0x0>;
+ axi_ethernetlite_0_mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: phy@1 {
+ compatible = "ethernet-phy-id001C.C915";
+ device_type = "ethernet-phy";
+ reg = <1>;
+ };
+ };
+ };
+
+ sdhci_0: sdhci@f000000000 {
+ u-boot,dm-spl;
+ compatible = "openpiton,piton-mmc", "openpiton,mmc";
+ reg = < 0x000000f0 0x00000000 0x00000000 0x00300000 >;
+ };
+
+ clint@fff1020000 {
+ compatible = "sifive,clint0", "openpiton,clint";
+ interrupts-extended = < &CPU0_intc 3
+ &CPU0_intc 7
+ &CPU1_intc 3
+ &CPU1_intc 7 >;
+ reg = < 0x000000ff 0xf1020000 0x00000000 0x000c0000 >;
+ clocks = <&clk0>;
+ };
+
+ PLIC0: plic@fff1100000 {
+ u-boot,dm-spl;
+ #interrupt-cells = <1>;
+ compatible = "sifive,plic-1.0.0", "openpiton,plic";
+ interrupt-controller;
+ interrupts-extended = < &CPU0_intc 11
+ &CPU0_intc 9
+ &CPU1_intc 11
+ &CPU1_intc 9 >;
+ reg = < 0x000000ff 0xf1100000 0x00000000 0x04000000 >;
+ riscv,max-priority = <7>;
+ riscv,ndev = <2>;
+ };
+ };
+};
--- /dev/null
+.. SPDX-License-Identifier: GPL-2.0+
+
+Openpiton RISC-V SoC
+====================
+
+OpenPiton RISC-V SoC
+--------------------
+OpenPiton is an open source, manycore processor and research platform. It is a
+tiled manycore framework scalable from one to 1/2 billion cores. It supports a
+number of ISAs including RISC-V with its P-Mesh cache coherence protocol and
+networks on chip. It is highly configurable in both core and uncore components.
+OpenPiton has been verified in both ASIC and multiple Xilinx FPGA prototypes
+running full-stack Debian linux.
+
+RISC-V Standard Bootflow
+-------------------------
+Currently, OpenPiton implements RISC-V standard bootflow in the following steps
+mover.S -> u-boot-spl -> opensbi -> u-boot -> Linux
+This board supports S-mode u-boot as well as M-mode SPL
+
+Building OpenPition
+---------------------
+If you'd like to build OpenPiton, please go to OpenPiton github repo
+(at https://github.com/PrincetonUniversity/openpiton) to build from the latest
+changes
+
+Building Images
+---------------------------
+
+SPL
+---
+
+1. Add the RISC-V toolchain to your PATH.
+2. Setup ARCH & cross compilation environment variable:
+
+.. code-block:: none
+
+ export CROSS_COMPILE=<riscv64 toolchain prefix>
+ export ARCH=riscv
+
+3. make openpiton_riscv64_spl_defconfig
+4. make
+
+U-Boot
+------
+
+1. Add the RISC-V toolchain to your PATH.
+2. Setup ARCH & cross compilation environment variable:
+
+.. code-block:: none
+
+ export CROSS_COMPILE=<riscv64 toolchain prefix>
+ export ARCH=riscv
+
+3. make openpiton_riscv64_defconfig
+4. make
+
+
+opensbi
+-------
+
+1. Add the RISC-V toolchain to your PATH.
+2. Setup ARCH & cross compilation environment variable:
+
+.. code-block:: none
+
+ export CROSS_COMPILE=<riscv64 toolchain prefix>
+ export ARCH=riscv
+
+3. Go to OpenSBI directory
+4. make PLATFORM=fpga/openpiton FW_PAYLOAD_PATH=<path to u-boot-nodtb.bin>
+
+
+Using fw_payload.bin with linux
+-------------------------------
+Put the generated fw_payload.bin into the /boot directory on the root filesystem,
+plug in the SD card, then flash the bitstream. Linux will boot automatically.
+
+Booting
+-------
+Once you plugin the sdcard and power up, you should see the U-Boot prompt.
+
+Sample Dual-core Debian boot log from OpenPiton
+-----------------------------------------------
+
+.. code-block:: none
+
+ Trying to boot from MMC1
+
+ OpenSBI v0.9-5-gd06cb61
+ ____ _____ ____ _____
+ / __ \ / ____| _ \_ _|
+ | | | |_ __ ___ _ __ | (___ | |_) || |
+ | | | | '_ \ / _ \ '_ \ \___ \| _ < | |
+ | |__| | |_) | __/ | | |____) | |_) || |_
+ \____/| .__/ \___|_| |_|_____/|____/_____|
+ | |
+ |_|
+
+ Platform Name : OPENPITON RISC-V
+ Platform Features : timer,mfdeleg
+ Platform HART Count : 3
+ Firmware Base : 0x80000000
+ Firmware Size : 104 KB
+ Runtime SBI Version : 0.2
+
+ Domain0 Name : root
+ Domain0 Boot HART : 0
+ Domain0 HARTs : 0*,1*,2*
+ Domain0 Region00 : 0x0000000080000000-0x000000008001ffff ()
+ Domain0 Region01 : 0x0000000000000000-0xffffffffffffffff (R,W,X)
+ Domain0 Next Address : 0x0000000080200000
+ Domain0 Next Arg1 : 0x0000000082200000
+ Domain0 Next Mode : S-mode
+ Domain0 SysReset : yes
+
+ Boot HART ID : 0
+ Boot HART Domain : root
+ Boot HART ISA : rv64imafdcsu
+ Boot HART Features : scounteren,mcounteren
+ Boot HART PMP Count : 0
+ Boot HART PMP Granularity : 0
+ Boot HART PMP Address Bits: 0
+ Boot HART MHPM Count : 0
+ Boot HART MHPM Count : 0
+ Boot HART MIDELEG : 0x0000000000000222
+ Boot HART MEDELEG : 0x000000000000b109
+
+
+ U-Boot 2021.01+ (Jun 12 2021 - 10:31:34 +0800)
+
+ DRAM: 1 GiB
+ MMC: sdhci@f000000000: 0 (eMMC)
+ In: uart@fff0c2c000
+ Out: uart@fff0c2c000
+ Err: uart@fff0c2c000
+ Hit any key to stop autoboot: 0
+ 6492992 bytes read in 5310 ms (1.2 MiB/s)
+ ## Flattened Device Tree blob at 86000000
+ Booting using the fdt blob at 0x86000000
+ Loading Device Tree to 00000000bfffa000, end 00000000bffff007 ... OK
+
+ Starting kernel ...
+
+ [ 0.000000] OF: fdt: Ignoring memory range 0x80000000 - 0x80200000
+ [ 0.000000] Linux version 5.6.0-rc4-gb9d34f7e294d-dirty
+ [ 0.000000] earlycon: sbi0 at I/O port 0x0 (options '')
+ [ 0.000000] printk: bootconsole [sbi0] enabled
+ [ 0.000000] Zone ranges:
+ [ 0.000000] DMA32 [mem 0x0000000080200000-0x00000000bfffffff]
+ [ 0.000000] Normal empty
+ [ 0.000000] Movable zone start for each node
+ [ 0.000000] Early memory node ranges
+ [ 0.000000] node 0: [mem 0x0000000080200000-0x00000000bfffffff]
+ [ 0.000000] Initmem setup node 0 [mem 0x0000000080200000-0x00000000bfffffff]
+ [ 0.000000] On node 0 totalpages: 261632
+ [ 0.000000] DMA32 zone: 4088 pages used for memmap
+ [ 0.000000] DMA32 zone: 0 pages reserved
+ [ 0.000000] DMA32 zone: 261632 pages, LIFO batch:63
+ [ 0.000000] software IO TLB: mapped [mem 0xbaffa000-0xbeffa000] (64MB)
+ [ 0.000000] SBI specification v0.2 detected
+ [ 0.000000] SBI implementation ID=0x1 Version=0x9
+ [ 0.000000] SBI v0.2 TIME extension detected
+ [ 0.000000] SBI v0.2 IPI extension detected
+ [ 0.000000] SBI v0.2 RFENCE extension detected
+ [ 0.000000] SBI v0.2 HSM extension detected
+ [ 0.000000] elf_hwcap is 0x112d
+ [ 0.000000] percpu: Embedded 16 pages/cpu s25368 r8192 d31976 u65536
+ [ 0.000000] pcpu-alloc: s25368 r8192 d31976 u65536 alloc=16*4096
+ [ 0.000000] pcpu-alloc: [0] 0
+ [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 257544
+ [ 0.000000] Kernel command line: earlycon=sbi root=/dev/piton_sd1
+ [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
+ [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
+ [ 0.000000] Sorting __ex_table...
+ [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
+ [ 0.000000] Memory: 956252K/1046528K available (4357K kernel code, 286K rwdata, 1200K rodata, 168K init, 311K bss, 90276K re)
+ [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
+ [ 0.000000] rcu: Hierarchical RCU implementation.
+ [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
+ [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
+ [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
+ [ 0.000000] NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0
+ [ 0.000000] plic: mapped 2 interrupts with 1 handlers for 2 contexts.
+ [ 0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [0]
+ [ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1ec037a6a, max_idle_ns: 7052723236599 ns
+ [ 0.000138] sched_clock: 64 bits at 520kHz, resolution 1919ns, wraps every 4398046510738ns
+ [ 0.009429] printk: console [hvc0] enabled
+ [ 0.009429] printk: console [hvc0] enabled
+ [ 0.017850] printk: bootconsole [sbi0] disabled
+ [ 0.017850] printk: bootconsole [sbi0] disabled
+ [ 0.028029] Calibrating delay loop (skipped), value calculated using timer frequency.. 1.04 BogoMIPS (lpj=5208)
+ [ 0.038753] pid_max: default: 32768 minimum: 301
+ [ 0.050248] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
+ [ 0.058661] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
+ [ 0.069359] *** VALIDATE tmpfs ***
+ [ 0.089093] *** VALIDATE proc ***
+ [ 0.101135] *** VALIDATE cgroup ***
+ [ 0.105019] *** VALIDATE cgroup2 ***
+ [ 0.144310] rcu: Hierarchical SRCU implementation.
+ [ 0.162836] smp: Bringing up secondary CPUs ...
+ [ 0.167736] smp: Brought up 1 node, 1 CPU
+ [ 0.185982] devtmpfs: initialized
+ [ 0.216237] random: get_random_u32 called from bucket_table_alloc.isra.25+0x4e/0x15c with crng_init=0
+ [ 0.236026] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
+ [ 0.246916] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
+ [ 0.266994] NET: Registered protocol family 16
+ [ 0.763362] clocksource: Switched to clocksource riscv_clocksource
+ [ 0.770122] *** VALIDATE bpf ***
+ [ 0.782837] *** VALIDATE ramfs ***
+ [ 0.829997] NET: Registered protocol family 2
+ [ 0.853577] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
+ [ 0.864085] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
+ [ 0.875373] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
+ [ 0.887958] TCP: Hash tables configured (established 8192 bind 8192)
+ [ 0.902149] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
+ [ 0.909904] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
+ [ 0.924809] NET: Registered protocol family 1
+ [ 0.948605] RPC: Registered named UNIX socket transport module.
+ [ 0.956003] RPC: Registered udp transport module.
+ [ 0.961565] RPC: Registered tcp transport module.
+ [ 0.966432] RPC: Registered tcp NFSv4.1 backchannel transport module.
+ [ 0.987180] Initialise system trusted keyrings
+ [ 0.998953] workingset: timestamp_bits=46 max_order=18 bucket_order=0
+ [ 1.323977] *** VALIDATE nfs ***
+ [ 1.328520] *** VALIDATE nfs4 ***
+ [ 1.334422] NFS: Registering the id_resolver key type
+ [ 1.340148] Key type id_resolver registered
+ [ 1.345280] Key type id_legacy registered
+ [ 1.349820] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
+ [ 1.357610] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
+ [ 1.866909] Key type asymmetric registered
+ [ 1.872460] Asymmetric key parser 'x509' registered
+ [ 1.878750] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
+ [ 1.887480] io scheduler mq-deadline registered
+ [ 1.892864] io scheduler kyber registered
+ [ 3.905595] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
+ [ 3.954332] fff0c2c000.uart: ttyS0 at MMIO 0xfff0c2c000 (irq = 1, base_baud = 4166687) is a 16550
+ [ 4.254794] loop: module loaded
+ [ 4.258269] piton_sd:v1.0 Apr 26, 2019
+ [ 4.258269]
+ [ 4.265170] gpt partition table header:
+ [ 4.265283] signature: 5452415020494645
+ [ 4.269258] revision: 10000
+ [ 4.273746] size: 5c
+ [ 4.276659] crc_header: 26b42404
+ [ 4.278911] reserved: 0
+ [ 4.282730] current lba: 1
+ [ 4.285311] backup lda: 3b723ff
+ [ 4.288093] partition entries lba: 2
+ [ 4.291835] number partition entries: 80
+ [ 4.295529] size partition entries: 80
+ [ 9.473253] piton_sd: piton_sd1
+ [ 10.099676] libphy: Fixed MDIO Bus: probed
+ [ 10.148782] NET: Registered protocol family 10
+ [ 10.183418] Segment Routing with IPv6
+ [ 10.189384] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
+ [ 10.214449] NET: Registered protocol family 17
+ [ 10.227413] Key type dns_resolver registered
+ [ 10.240561] Loading compiled-in X.509 certificates
+ [ 10.465264] EXT4-fs (piton_sd1): mounted filesystem with ordered data mode. Opts: (null)
+ [ 10.475922] VFS: Mounted root (ext4 filesystem) readonly on device 254:1.
+ [ 10.551865] devtmpfs: mounted
+ [ 10.562744] Freeing unused kernel memory: 168K
+ [ 10.567450] This architecture does not have kernel memory protection.
+ [ 10.574688] Run /sbin/init as init process
+ [ 10.578916] with arguments:
+ [ 10.582489] /sbin/init
+ [ 10.585312] with environment:
+ [ 10.588518] HOME=/
+ [ 10.591459] TERM=linux
+ [ 18.154373] systemd[1]: System time before build time, advancing clock.
+ [ 18.565415] systemd[1]: systemd 238 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIB)
+ [ 18.596359] systemd[1]: Detected architecture riscv64.
+
+ Welcome to Debian GNU/Linux buster/sid!
+
+ [ 18.797150] systemd[1]: Set hostname to <openpiton>.
+ [ 31.609244] random: systemd: uninitialized urandom read (16 bytes read)
+ [ 31.630366] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
+ [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
+ [ 31.674820] random: systemd: uninitialized urandom read (16 bytes read)
+ [ 31.806800] systemd[1]: Created slice system-serial\x2dgetty.slice.
+ [ OK ] Created slice system-serial\x2dgetty.slice.
+ [ 31.839855] random: systemd: uninitialized urandom read (16 bytes read)
+ [ 31.850670] systemd[1]: Reached target Slices.
+ [ OK ] Reached target Slices.
+ [ 32.128005] systemd[1]: Reached target Swap.
+ [ OK ] Reached target Swap.
+ [ 32.180337] systemd[1]: Listening on Journal Socket.
+ [ OK ] Listening on Journal Socket.
+ [ 32.416448] systemd[1]: Mounting Kernel Debug File System...
+ Mounting Kernel Debug File System...
+ [ 32.937934] systemd[1]: Starting Remount Root and Kernel File Systems...
+ Starting Remount Root and Kernel File Systems...
+ [ 33.117472] urandom_read: 4 callbacks suppressed
+ [ 33.117645] random: systemd: uninitialized urandom read (16 bytes read)
+ [ 33.214868] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
+ [ OK ] Started Forward Password Requests to Wall Directory Watch.
+ [ 33.366745] random: systemd: uninitialized urandom read (16 bytes read)
+ [ 33.453262] systemd[1]: Listening on Journal Socket (/dev/log).
+ [ OK ] Listening on Journal Socket (/dev/log).
+ [ 33.627020] random: systemd: uninitialized urandom read (16 bytes read)
+ [ 34.029973] systemd[1]: Starting Load Kernel Modules...
+ Starting Load Kernel Modules...
+ [ OK ] Created slice system-getty.slice.
+ [ OK ] Started Dispatch Password Requests to Console Directory Watch.
+ [ OK ] Reached target Local Encrypted Volumes.
+ [ OK ] Reached target Paths.
+ [ OK ] Reached target Remote File Systems.
+ [ OK ] Listening on udev Kernel Socket.
+ [ OK ] Listening on udev Control Socket.
+ [ OK ] Reached target Sockets.
+ Starting udev Coldplug all Devices...
+ Starting Journal Service...
+ [ 37.108761] systemd[1]: Starting Create Static Device Nodes in /dev...
+ Starting Create Static Device Nodes in /dev...
+ [ 37.941929] systemd[1]: Mounted Kernel Debug File System.
+ [ OK ] Mounted Kernel Debug File System.
+ [ 38.463855] systemd[1]: Started Remount Root and Kernel File Systems.
+ [ OK ] Started Remount Root and Kernel File Systems.
+ [ 39.614728] systemd[1]: Started Load Kernel Modules.
+ [ OK ] Started Load Kernel Modules.
+ [ 40.794332] systemd[1]: Starting Apply Kernel Variables...
+ Starting Apply Kernel Variables...
+ [ 41.928338] systemd[1]: Starting Load/Save Random Seed...
+ Starting Load/Save Random Seed...
+ [ 43.494757] systemd[1]: Started Create Static Device Nodes in /dev.
+ [ OK ] Started Create Static Device Nodes in /dev.
+ [ 44.795372] systemd[1]: Starting udev Kernel Device Manager...
+ Starting udev Kernel Device Manager...
+ [ 45.043065] systemd[1]: Reached target Local File Systems (Pre).
+ [ OK ] Reached target Local File Systems (Pre).
+ [ 45.224716] systemd[1]: Reached target Local File Systems.
+ [ OK ] Reached target Local File Systems.
+ [ 46.036491] systemd[1]: Started Apply Kernel Variables.
+ [ OK ] Started Apply Kernel Variables.
+ [ 46.947879] systemd[1]: Started Load/Save Random Seed.
+ [ OK ] Started Load/Save Random Seed.
+ [ 47.910242] systemd[1]: Starting Raise network interfaces...
+ Starting Raise network interfaces...
+ [ 48.119915] systemd[1]: Started Journal Service.
+ [ OK ] Started Journal Service.
+ Starting Flush Journal to Persistent Storage...
+ [ OK ] Started udev Kernel Device Manager.
+ [ 55.369915] systemd-journald[88]: Received request to flush runtime journal from PID 1
+ [ OK ] Started Flush Journal to Persistent Storage.
+ Starting Create Volatile Files and Directories...
+ [ OK ] Started Raise network interfaces.
+ [ OK ] Reached target Network.
+ [FAILED] Failed to start Create Volatile Files and Directories.
+ See 'systemctl status systemd-tmpfiles-setup.service' for details.
+ Starting Update UTMP about System Boot/Shutdown...
+ [FAILED] Failed to start Network Time Synchronization.
+ See 'systemctl status systemd-timesyncd.service' for details.
+ [ OK ] Reached target System Time Synchronized.
+ [ OK ] Stopped Network Time Synchronization.
+ [ OK ] Started udev Coldplug all Devices.
+ [ OK ] Found device /dev/hvc0.
+ [ OK ] Reached target System Initialization.
+ [ OK ] Reached target Basic System.
+ [ OK ] Started Regular background program processing daemon.
+ [ OK ] Started Daily Cleanup of Temporary Directories.
+ Starting Permit User Sessions...
+ [ OK ] Started Daily apt download activities.
+ [ OK ] Started Daily apt upgrade and clean activities.
+ [ OK ] Reached target Timers.
+ [ OK ] Started Permit User Sessions.
+ [ OK ] Started Serial Getty on hvc0.
+ [ OK ] Reached target Login Prompts.
+ [ OK ] Reached target Multi-User System.
+ [ OK ] Reached target Graphical Interface.
+
+ Debian GNU/Linux buster/sid openpiton hvc0
+
+ openpiton login:
projects / u-boot.git / commitdiff