arm: mvebu: spl: Add option to reset the board on DDR training failure

Some boards may occacionally fail DDR training. Currently we hang() in
this case. Add an option that makes the board do an immediate reset in
such a case, so that a new training is tried as soon as possible,
instead of hanging and possibly waiting for watchdog to reset the board.

(If the DDR training fails while booting the image via UART, we will
 still hang - it doesn't make sense to reset in such a case, because
 after reset the board will try booting from another medium, and the
 UART booting utility does not expect that.)

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>

diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index d23cc0c760f130f5471ec0d6036107fbcf16772c..7d487f270b511bc6901857ee953362b4aeef1873 100644 (file)
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -213,6 +213,19 @@ config DDR_LOG_LEVEL
          At level 3, rovides the windows margin of each DQ as a results of
          DQS centeralization.
 
+config DDR_RESET_ON_TRAINING_FAILURE
+       bool "Reset the board on DDR training failure instead of hanging"
+       depends on ARMADA_38X || ARMADA_XP
+       help
+         If DDR training fails in SPL, reset the board instead of hanging.
+         Some boards are known to fail DDR training occasionally and an
+         immediate reset may be preferable to waiting until the board is
+         reset by watchdog (if there even is one).
+
+         Note that if booting via UART and the DDR training fails, the
+         device will still hang - it doesn't make sense to reset the board
+         in such a case.
+
 config SYS_BOARD
        default "clearfog" if TARGET_CLEARFOG
        default "helios4" if TARGET_HELIOS4

diff --git a/arch/arm/mach-mvebu/spl.c b/arch/arm/mach-mvebu/spl.c
index 273ecb8bd6cff2727d2d8288dfba67ac17a2ac21..5ad323f9d9d19d4f20dcfe39c760845a9d93678a 100644 (file)
--- a/arch/arm/mach-mvebu/spl.c
+++ b/arch/arm/mach-mvebu/spl.c
@@ -4,6 +4,7 @@
  */
 
 #include <common.h>
+#include <cpu_func.h>
 #include <dm.h>
 #include <fdtdec.h>
 #include <hang.h>
@@ -330,7 +331,11 @@ void board_init_f(ulong dummy)
        ret = ddr3_init();
        if (ret) {
                printf("ddr3_init() failed: %d\n", ret);
-               hang();
+               if (IS_ENABLED(CONFIG_DDR_RESET_ON_TRAINING_FAILURE) &&
+                   get_boot_device() != BOOT_DEVICE_UART)
+                       reset_cpu();
+               else
+                       hang();
        }
 #endif