+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Bluegiga APX4 Development Kit
- *
- * Copyright (C) 2012 Bluegiga Technologies Oy
- *
- * Authors:
- * Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
- * Lauri Hintsala <lauri.hintsala@bluegiga.com>
- *
- * Based on m28evk.c:
- * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
- * on behalf of DENX Software Engineering GmbH
- */
-
-#include <common.h>
-#include <init.h>
-#include <net.h>
-#include <asm/gpio.h>
-#include <asm/io.h>
-#include <asm/setup.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/iomux-mx28.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sys_proto.h>
-#include <env.h>
-#include <linux/mii.h>
-#include <miiphy.h>
-#include <netdev.h>
-#include <errno.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* Functions */
-int board_early_init_f(void)
-{
- /* IO0 clock at 480MHz */
- mxs_set_ioclk(MXC_IOCLK0, 480000);
- /* IO1 clock at 480MHz */
- mxs_set_ioclk(MXC_IOCLK1, 480000);
-
- /* SSP0 clock at 96MHz */
- mxs_set_sspclk(MXC_SSPCLK0, 96000, 0);
-
- return 0;
-}
-
-int dram_init(void)
-{
- return mxs_dram_init();
-}
-
-int board_init(void)
-{
- /* Adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
- return 0;
-}
-
-#ifdef CONFIG_CMD_MMC
-int board_mmc_init(struct bd_info *bis)
-{
- return mxsmmc_initialize(bis, 0, NULL, NULL);
-}
-#endif
-
-
-#ifdef CONFIG_CMD_NET
-
-#define MII_PHY_CTRL2 0x1f
-int fecmxc_mii_postcall(int phy)
-{
- /* change PHY RMII clock to 50MHz */
- miiphy_write("FEC", 0, MII_PHY_CTRL2, 0x8180);
-
- return 0;
-}
-
-int board_eth_init(struct bd_info *bis)
-{
- int ret;
- struct eth_device *dev;
-
- ret = cpu_eth_init(bis);
- if (ret) {
- printf("FEC MXS: Unable to init FEC clocks\n");
- return ret;
- }
-
- ret = fecmxc_initialize(bis);
- if (ret) {
- printf("FEC MXS: Unable to init FEC\n");
- return ret;
- }
-
- dev = eth_get_dev_by_name("FEC");
- if (!dev) {
- printf("FEC MXS: Unable to get FEC device entry\n");
- return -EINVAL;
- }
-
- ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall);
- if (ret) {
- printf("FEC MXS: Unable to register FEC MII postcall\n");
- return ret;
- }
-
- return ret;
-}
-#endif
-
-#ifdef CONFIG_SERIAL_TAG
-#define MXS_OCOTP_MAX_TIMEOUT 1000000
-void get_board_serial(struct tag_serialnr *serialnr)
-{
- struct mxs_ocotp_regs *ocotp_regs =
- (struct mxs_ocotp_regs *)MXS_OCOTP_BASE;
-
- serialnr->high = 0;
- serialnr->low = 0;
-
- writel(OCOTP_CTRL_RD_BANK_OPEN, &ocotp_regs->hw_ocotp_ctrl_set);
-
- if (mxs_wait_mask_clr(&ocotp_regs->hw_ocotp_ctrl_reg, OCOTP_CTRL_BUSY,
- MXS_OCOTP_MAX_TIMEOUT)) {
- printf("MXS: Can't get serial number from OCOTP\n");
- return;
- }
-
- serialnr->low = readl(&ocotp_regs->hw_ocotp_cust3);
-}
-#endif
-
-#ifdef CONFIG_REVISION_TAG
-u32 get_board_rev(void)
-{
- if (env_get("revision#") != NULL)
- return simple_strtoul(env_get("revision#"), NULL, 10);
- return 0;
-}
-#endif
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Bluegiga APX4 Development Kit
- *
- * Copyright (C) 2012 Bluegiga Technologies Oy
- *
- * Authors:
- * Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
- * Lauri Hintsala <lauri.hintsala@bluegiga.com>
- *
- * Based on spl_boot.c:
- * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
- * on behalf of DENX Software Engineering GmbH
- */
-
-#include <common.h>
-#include <config.h>
-#include <asm/gpio.h>
-#include <asm/io.h>
-#include <asm/arch/iomux-mx28.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/sys_proto.h>
-
-#define MUX_CONFIG_SSP0 (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
-#define MUX_CONFIG_GPMI (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
-#define MUX_CONFIG_ENET (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
-#define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL)
-
-const iomux_cfg_t iomux_setup[] = {
- /* DUART */
- MX28_PAD_PWM0__DUART_RX,
- MX28_PAD_PWM1__DUART_TX,
-
- /* LED */
- MX28_PAD_PWM3__GPIO_3_28,
-
- /* MMC0 */
- MX28_PAD_SSP0_DATA0__SSP0_D0 | MUX_CONFIG_SSP0,
- MX28_PAD_SSP0_DATA1__SSP0_D1 | MUX_CONFIG_SSP0,
- MX28_PAD_SSP0_DATA2__SSP0_D2 | MUX_CONFIG_SSP0,
- MX28_PAD_SSP0_DATA3__SSP0_D3 | MUX_CONFIG_SSP0,
- MX28_PAD_SSP0_CMD__SSP0_CMD | MUX_CONFIG_SSP0,
- MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
- (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_NOPULL),
- MX28_PAD_SSP0_SCK__SSP0_SCK |
- (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-
- /* GPMI NAND */
- MX28_PAD_GPMI_D00__GPMI_D0 | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_D01__GPMI_D1 | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_D02__GPMI_D2 | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_D03__GPMI_D3 | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_D04__GPMI_D4 | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_D05__GPMI_D5 | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_D06__GPMI_D6 | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_D07__GPMI_D7 | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_CE0N__GPMI_CE0N | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_RDY0__GPMI_READY0 | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_RDN__GPMI_RDN |
- (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_WRN__GPMI_WRN | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_ALE__GPMI_ALE | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_CLE__GPMI_CLE | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_RESETN__GPMI_RESETN | MUX_CONFIG_GPMI,
-
- /* FEC0 */
- MX28_PAD_ENET0_MDC__ENET0_MDC | MUX_CONFIG_ENET,
- MX28_PAD_ENET0_MDIO__ENET0_MDIO | MUX_CONFIG_ENET,
- MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MUX_CONFIG_ENET,
- MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MUX_CONFIG_ENET,
- MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MUX_CONFIG_ENET,
- MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MUX_CONFIG_ENET,
- MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MUX_CONFIG_ENET,
- MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MUX_CONFIG_ENET,
- MX28_PAD_ENET_CLK__CLKCTRL_ENET | MUX_CONFIG_ENET,
-
- /* I2C */
- MX28_PAD_I2C0_SCL__I2C0_SCL,
- MX28_PAD_I2C0_SDA__I2C0_SDA,
-
- /* EMI */
- MX28_PAD_EMI_D00__EMI_DATA0 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D01__EMI_DATA1 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D02__EMI_DATA2 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D03__EMI_DATA3 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D04__EMI_DATA4 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D05__EMI_DATA5 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D06__EMI_DATA6 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D07__EMI_DATA7 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D08__EMI_DATA8 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D09__EMI_DATA9 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D10__EMI_DATA10 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D11__EMI_DATA11 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D12__EMI_DATA12 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D13__EMI_DATA13 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D14__EMI_DATA14 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D15__EMI_DATA15 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_ODT0__EMI_ODT0 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_DQM0__EMI_DQM0 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_ODT1__EMI_ODT1 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_DQM1__EMI_DQM1 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK | MUX_CONFIG_EMI,
- MX28_PAD_EMI_CLK__EMI_CLK | MUX_CONFIG_EMI,
- MX28_PAD_EMI_DQS0__EMI_DQS0 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_DQS1__EMI_DQS1 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN | MUX_CONFIG_EMI,
-
- MX28_PAD_EMI_A00__EMI_ADDR0 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A01__EMI_ADDR1 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A02__EMI_ADDR2 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A03__EMI_ADDR3 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A04__EMI_ADDR4 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A05__EMI_ADDR5 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A06__EMI_ADDR6 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A07__EMI_ADDR7 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A08__EMI_ADDR8 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A09__EMI_ADDR9 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A10__EMI_ADDR10 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A11__EMI_ADDR11 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A12__EMI_ADDR12 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A13__EMI_ADDR13 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A14__EMI_ADDR14 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_BA0__EMI_BA0 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_BA1__EMI_BA1 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_BA2__EMI_BA2 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_CASN__EMI_CASN | MUX_CONFIG_EMI,
- MX28_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI,
- MX28_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI,
- MX28_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI,
- MX28_PAD_EMI_CE1N__EMI_CE1N | MUX_CONFIG_EMI,
- MX28_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI,
-};
-
-void board_init_ll(const uint32_t arg, const uint32_t *resptr)
-{
- mxs_common_spl_init(arg, resptr, iomux_setup, ARRAY_SIZE(iomux_setup));
-
- /* switch LED on */
- gpio_direction_output(MX28_PAD_PWM3__GPIO_3_28, 0);
-}
-
-void mxs_adjust_memory_params(uint32_t *dram_vals)
-{
- /*
- * All address lines are routed from CPU to memory chip.
- * ADDR_PINS field is set to zero.
- */
- dram_vals[0x74 >> 2] = 0x0f02000a;
-
- /* Used memory has 4 banks. EIGHT_BANK_MODE bit is disabled. */
- dram_vals[0x7c >> 2] = 0x00000101;
-}
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2012 Bluegiga Technologies Oy
- *
- * Authors:
- * Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
- * Lauri Hintsala <lauri.hintsala@bluegiga.com>
- *
- * Based on m28evk.h:
- * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
- * on behalf of DENX Software Engineering GmbH
- */
-#ifndef __CONFIGS_APX4DEVKIT_H__
-#define __CONFIGS_APX4DEVKIT_H__
-
-/* System configurations */
-#define CONFIG_MACH_TYPE MACH_TYPE_APX4DEVKIT
-
-/* Memory configuration */
-#define PHYS_SDRAM_1 0x40000000 /* Base address */
-#define PHYS_SDRAM_1_SIZE 0x20000000 /* Max 512 MB RAM */
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-
-/* Environment is in NAND */
-#if defined(CONFIG_CMD_NAND) && defined(CONFIG_ENV_IS_IN_NAND)
-#define CONFIG_ENV_RANGE (384 * 1024)
-#endif
-
-/* UBI and NAND partitioning */
-
-/* FEC Ethernet on SoC */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_FEC_MXC
-#define CONFIG_ETHPRIME "FEC"
-#define CONFIG_FEC_MXC_PHYADDR 0
-#define IMX_FEC_BASE MXS_ENET0_BASE
-#endif
-
-/* USB */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_EHCI_MXS_PORT1
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
-#endif
-
-/* Boot Linux */
-#define CONFIG_BOOTFILE "uImage"
-#define CONFIG_BOOTCOMMAND "run bootcmd_nand"
-#define CONFIG_LOADADDR 0x41000000
-#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#define CONFIG_SERIAL_TAG
-#define CONFIG_REVISION_TAG
-
-/* Extra Environments */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
- "verify=no\0" \
- "bootcmd=run bootcmd_nand\0" \
- "kernelargs=console=tty0 console=ttyAMA0,115200 consoleblank=0\0" \
- "bootargs_nand=" \
- "setenv bootargs ${kernelargs} ubi.mtd=3,2048 " \
- "root=ubi0:rootfs rootfstype=ubifs ${mtdparts} rw\0" \
- "bootcmd_nand=" \
- "run bootargs_nand && ubi part root 2048 && " \
- "ubifsmount ubi:rootfs && ubifsload 41000000 boot/uImage && " \
- "bootm 41000000\0" \
- "bootargs_mmc=" \
- "setenv bootargs ${kernelargs} " \
- "root=/dev/mmcblk0p2 rootwait ${mtdparts} rw\0" \
- "bootcmd_mmc=" \
- "run bootargs_mmc && mmc rescan && " \
- "ext2load mmc 0:2 41000000 boot/uImage && bootm 41000000\0" \
-""
-
-/* The rest of the configuration is shared */
-#include <configs/mxs.h>
-
-#endif /* __CONFIGS_APX4DEVKIT_H__ */
projects / u-boot.git / commitdiff