--- /dev/null
+ /*
+ * Copyright (C) 2013 Samsung Electronics
+ *
+ * Configuration settings for the SAMSUNG EXYNOS5 board.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+ #ifndef __CONFIG_H
+ #define __CONFIG_H
+
+ /* High Level Configuration Options */
+ #define CONFIG_SAMSUNG /* in a SAMSUNG core */
+ #define CONFIG_S5P /* S5P Family */
+ #define CONFIG_EXYNOS5 /* which is in a Exynos5 Family */
+
+ #include <asm/arch/cpu.h> /* get chip and board defs */
+
+ #define CONFIG_SYS_GENERIC_BOARD
+ #define CONFIG_ARCH_CPU_INIT
+ #define CONFIG_DISPLAY_CPUINFO
+ #define CONFIG_DISPLAY_BOARDINFO
+ #define CONFIG_BOARD_COMMON
+ #define CONFIG_ARCH_EARLY_INIT_R
+ #define CONFIG_EXYNOS_SPL
+
+ /* Enable fdt support for Exynos5250 */
+ #define CONFIG_OF_CONTROL
+ #define CONFIG_OF_SEPARATE
+
+ /* Allow tracing to be enabled */
+ #define CONFIG_TRACE
+ #define CONFIG_CMD_TRACE
+ #define CONFIG_TRACE_BUFFER_SIZE (16 << 20)
+ #define CONFIG_TRACE_EARLY_SIZE (8 << 20)
+ #define CONFIG_TRACE_EARLY
+ #define CONFIG_TRACE_EARLY_ADDR 0x50000000
+
+ /* Keep L2 Cache Disabled */
+ #define CONFIG_SYS_DCACHE_OFF
+ #define CONFIG_SYS_CACHELINE_SIZE 64
+
+ /* Enable ACE acceleration for SHA1 and SHA256 */
+ #define CONFIG_EXYNOS_ACE_SHA
+ #define CONFIG_SHA_HW_ACCEL
+
+ /* input clock of PLL: SMDK5250 has 24MHz input clock */
+ #define CONFIG_SYS_CLK_FREQ 24000000
+
+ #define CONFIG_SETUP_MEMORY_TAGS
+ #define CONFIG_CMDLINE_TAG
+ #define CONFIG_INITRD_TAG
+ #define CONFIG_CMDLINE_EDITING
+
+ /* Power Down Modes */
+ #define S5P_CHECK_SLEEP 0x00000BAD
+ #define S5P_CHECK_DIDLE 0xBAD00000
+ #define S5P_CHECK_LPA 0xABAD0000
+
+ /* Offset for inform registers */
+ #define INFORM0_OFFSET 0x800
+ #define INFORM1_OFFSET 0x804
+ #define INFORM2_OFFSET 0x808
+ #define INFORM3_OFFSET 0x80c
+
+ /* Size of malloc() pool */
+ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20))
+
+ /* select serial console configuration */
+ #define CONFIG_BAUDRATE 115200
+ #define EXYNOS5_DEFAULT_UART_OFFSET 0x010000
+ #define CONFIG_SILENT_CONSOLE
+
+ /* Enable keyboard */
+ #define CONFIG_CROS_EC /* CROS_EC protocol */
+ #define CONFIG_CROS_EC_SPI /* Support CROS_EC over SPI */
+ #define CONFIG_CROS_EC_I2C /* Support CROS_EC over I2C */
+ #define CONFIG_CROS_EC_KEYB /* CROS_EC keyboard input */
+ #define CONFIG_CMD_CROS_EC
+ #define CONFIG_KEYBOARD
+
+ /* Console configuration */
+ #define CONFIG_CONSOLE_MUX
+ #define CONFIG_SYS_CONSOLE_IS_IN_ENV
+ #define EXYNOS_DEVICE_SETTINGS \
+ "stdin=serial,cros-ec-keyb\0" \
+ "stdout=serial,lcd\0" \
+ "stderr=serial,lcd\0"
+
+ #define CONFIG_EXTRA_ENV_SETTINGS \
+ EXYNOS_DEVICE_SETTINGS
+
+ /* SD/MMC configuration */
+ #define CONFIG_GENERIC_MMC
+ #define CONFIG_MMC
+ #define CONFIG_SDHCI
+ #define CONFIG_S5P_SDHCI
+ #define CONFIG_DWMMC
+ #define CONFIG_EXYNOS_DWMMC
+ #define CONFIG_SUPPORT_EMMC_BOOT
++#define CONFIG_BOUNCE_BUFFER
+
+ #define CONFIG_BOARD_EARLY_INIT_F
+ #define CONFIG_SKIP_LOWLEVEL_INIT
+
+ /* PWM */
+ #define CONFIG_PWM
+
+ /* allow to overwrite serial and ethaddr */
+ #define CONFIG_ENV_OVERWRITE
+
+ /* Command definition*/
+ #include <config_cmd_default.h>
+
+ #define CONFIG_CMD_PING
+ #define CONFIG_CMD_ELF
+ #define CONFIG_CMD_MMC
+ #define CONFIG_CMD_EXT2
+ #define CONFIG_CMD_FAT
+ #define CONFIG_CMD_NET
+ #define CONFIG_CMD_HASH
+
+ #define CONFIG_BOOTDELAY 3
+ #define CONFIG_ZERO_BOOTDELAY_CHECK
+
+ /* Thermal Management Unit */
+ #define CONFIG_EXYNOS_TMU
+ #define CONFIG_CMD_DTT
+ #define CONFIG_TMU_CMD_DTT
+
+ /* TPM */
+ #define CONFIG_TPM
+ #define CONFIG_CMD_TPM
+ #define CONFIG_TPM_TIS_I2C
+ #define CONFIG_TPM_TIS_I2C_BUS_NUMBER 3
+ #define CONFIG_TPM_TIS_I2C_SLAVE_ADDR 0x20
+
+ /* MMC SPL */
+ #define CONFIG_SPL
+ #define COPY_BL2_FNPTR_ADDR 0x02020030
+
+ #define CONFIG_SPL_LIBCOMMON_SUPPORT
+ #define CONFIG_SPL_GPIO_SUPPORT
+
+ /* specific .lds file */
+ #define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds"
+ #define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024)
+
+
+ /* Miscellaneous configurable options */
+ #define CONFIG_SYS_LONGHELP /* undef to save memory */
+ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+ #define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
+ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+ #define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
+ /* Boot Argument Buffer Size */
+ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+ /* memtest works on */
+ #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
+ #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000)
+ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
+
+ #define CONFIG_RD_LVL
+
+ #define CONFIG_NR_DRAM_BANKS 8
+ #define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */
+ #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
+ #define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE
+ #define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE)
+ #define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE
+ #define PHYS_SDRAM_3 (CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE))
+ #define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE
+ #define PHYS_SDRAM_4 (CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE))
+ #define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE
+ #define PHYS_SDRAM_5 (CONFIG_SYS_SDRAM_BASE + (4 * SDRAM_BANK_SIZE))
+ #define PHYS_SDRAM_5_SIZE SDRAM_BANK_SIZE
+ #define PHYS_SDRAM_6 (CONFIG_SYS_SDRAM_BASE + (5 * SDRAM_BANK_SIZE))
+ #define PHYS_SDRAM_6_SIZE SDRAM_BANK_SIZE
+ #define PHYS_SDRAM_7 (CONFIG_SYS_SDRAM_BASE + (6 * SDRAM_BANK_SIZE))
+ #define PHYS_SDRAM_7_SIZE SDRAM_BANK_SIZE
+ #define PHYS_SDRAM_8 (CONFIG_SYS_SDRAM_BASE + (7 * SDRAM_BANK_SIZE))
+ #define PHYS_SDRAM_8_SIZE SDRAM_BANK_SIZE
+
+ #define CONFIG_SYS_MONITOR_BASE 0x00000000
+
+ /* FLASH and environment organization */
+ #define CONFIG_SYS_NO_FLASH
+ #undef CONFIG_CMD_IMLS
+
+ #define CONFIG_SYS_MMC_ENV_DEV 0
+
+ #define CONFIG_SECURE_BL1_ONLY
+
+ /* Secure FW size configuration */
+ #ifdef CONFIG_SECURE_BL1_ONLY
+ #define CONFIG_SEC_FW_SIZE (8 << 10) /* 8KB */
+ #else
+ #define CONFIG_SEC_FW_SIZE 0
+ #endif
+
+ /* Configuration of BL1, BL2, ENV Blocks on mmc */
+ #define CONFIG_RES_BLOCK_SIZE (512)
+ #define CONFIG_BL1_SIZE (16 << 10) /*16 K reserved for BL1*/
+ #define CONFIG_BL2_SIZE (512UL << 10UL) /* 512 KB */
+ #define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */
+
+ #define CONFIG_BL1_OFFSET (CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE)
+ #define CONFIG_BL2_OFFSET (CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE)
+ #define CONFIG_ENV_OFFSET (CONFIG_BL2_OFFSET + CONFIG_BL2_SIZE)
+
+ /* U-boot copy size from boot Media to DRAM.*/
+ #define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512)
+ #define BL2_SIZE_BLOC_COUNT (CONFIG_BL2_SIZE/512)
+
+ #define CONFIG_SPI_BOOTING
+ #define EXYNOS_COPY_SPI_FNPTR_ADDR 0x02020058
+ #define SPI_FLASH_UBOOT_POS (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)
+
+ #define CONFIG_DOS_PARTITION
+ #define CONFIG_EFI_PARTITION
+ #define CONFIG_CMD_PART
+ #define CONFIG_PARTITION_UUIDS
+
+ /* I2C */
+ #define CONFIG_SYS_I2C_INIT_BOARD
+ #define CONFIG_SYS_I2C
+ #define CONFIG_CMD_I2C
+ #define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 /* 100 Kbps */
+ #define CONFIG_SYS_I2C_S3C24X0
+ #define CONFIG_I2C_MULTI_BUS
+ #define CONFIG_SYS_I2C_S3C24X0_SLAVE 0x0
+ #define CONFIG_I2C_EDID
+
+ /* SPI */
+ #define CONFIG_ENV_IS_IN_SPI_FLASH
+ #define CONFIG_SPI_FLASH
+ #define CONFIG_ENV_SPI_BASE 0x12D30000
+
+ #ifdef CONFIG_SPI_FLASH
+ #define CONFIG_EXYNOS_SPI
+ #define CONFIG_CMD_SF
+ #define CONFIG_CMD_SPI
+ #define CONFIG_SPI_FLASH_WINBOND
+ #define CONFIG_SPI_FLASH_GIGADEVICE
+ #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
+ #define CONFIG_SF_DEFAULT_SPEED 50000000
+ #define EXYNOS5_SPI_NUM_CONTROLLERS 5
+ #define CONFIG_OF_SPI
+ #endif
+
+ #ifdef CONFIG_ENV_IS_IN_SPI_FLASH
+ #define CONFIG_ENV_SPI_MODE SPI_MODE_0
+ #define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
+ #define CONFIG_ENV_SPI_BUS 1
+ #define CONFIG_ENV_SPI_MAX_HZ 50000000
+ #endif
+
+ /* PMIC */
+ #define CONFIG_POWER
+ #define CONFIG_POWER_I2C
+
+ /* Ethernet Controllor Driver */
+ #ifdef CONFIG_CMD_NET
+ #define CONFIG_SMC911X
+ #define CONFIG_SMC911X_BASE 0x5000000
+ #define CONFIG_SMC911X_16_BIT
+ #define CONFIG_ENV_SROM_BANK 1
+ #endif /*CONFIG_CMD_NET*/
+
+ /* Enable PXE Support */
+ #ifdef CONFIG_CMD_NET
+ #define CONFIG_CMD_PXE
+ #define CONFIG_MENU
+ #endif
+
+ /* Enable devicetree support */
+ #define CONFIG_OF_LIBFDT
+
+ /* SHA hashing */
+ #define CONFIG_CMD_HASH
+ #define CONFIG_HASH_VERIFY
+ #define CONFIG_SHA1
+ #define CONFIG_SHA256
+
+ /* Enable Time Command */
+ #define CONFIG_CMD_TIME
+
+ #define CONFIG_CMD_BOOTZ
+
+ #endif /* __CONFIG_H */
projects / u-boot.git / commitdiff