rockchip: Add support for MiQi rk3288 board

MiQi is rk3288 based development board with 1 or 2 GB SDRAM, 16 GB eMMC,
micro SD card interface, 4 USB 2.0 ports, HDMI, gigabit Ethernet and
expansion ports.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Eddie Cai <eddie.cai.linux@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 87d9353de4790017041dd834a9c06db8fd288bd3..bc4dc2ce797cc6937c383be47bc6c0d884c8536f 100644 (file)
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -32,6 +32,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
        rk3288-evb.dtb \
        rk3288-fennec.dtb \
        rk3288-firefly.dtb \
+       rk3288-miqi.dtb \
        rk3288-popmetal.dtb \
        rk3188-radxarock.dtb \
        rk3288-rock2-square.dtb \

diff --git a/arch/arm/dts/rk3288-miqi.dts b/arch/arm/dts/rk3288-miqi.dts
new file mode 100644 (file)
index 0000000..7b92caf
--- /dev/null
+++ b/arch/arm/dts/rk3288-miqi.dts
@@ -0,0 +1,46 @@
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier:     GPL-2.0+ X11
+ */
+
+/dts-v1/;
+#include "rk3288-miqi.dtsi"
+
+/ {
+       model = "mqmaker MiQi";
+       compatible = "mqmaker,miqi", "rockchip,rk3288";
+
+       chosen {
+               stdout-path = "serial2:115200n8";
+       };
+};
+
+&dmc {
+       rockchip,pctl-timing = <0x29a 0xc8 0x1f8 0x42 0x4e 0x4 0xea 0xa
+               0x5 0x0 0xa 0x7 0x19 0x24 0xa 0x7
+               0x5 0xa 0x5 0x200 0x5 0x10 0x40 0x0
+               0x1 0x7 0x7 0x4 0xc 0x43 0x100 0x0
+               0x5 0x0>;
+       rockchip,phy-timing = <0x48f9aab4 0xea0910 0x1002c200
+               0xa60 0x40 0x10 0x0>;
+       rockchip,sdram-params = <0x30B25564 0x627 3 666000000 3 9 1>;
+};
+
+
+&pinctrl {
+       u-boot,dm-pre-reloc;
+};
+
+&uart2 {
+       u-boot,dm-pre-reloc;
+       reg-shift = <2>;
+};
+
+&sdmmc {
+       u-boot,dm-pre-reloc;
+};
+
+&emmc {
+       u-boot,dm-pre-reloc;
+};

diff --git a/arch/arm/dts/rk3288-miqi.dtsi b/arch/arm/dts/rk3288-miqi.dtsi
new file mode 100644 (file)
index 0000000..47dc0f9
--- /dev/null
+++ b/arch/arm/dts/rk3288-miqi.dtsi
@@ -0,0 +1,423 @@
+/*
+ * Copyright (c) 2016 Heiko Stuebner <heiko@sntech.de>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+ X11
+ */
+
+#include "rk3288.dtsi"
+
+/ {
+       memory {
+               device_type = "memory";
+               reg = <0 0x80000000>;
+       };
+
+       ext_gmac: external-gmac-clock {
+               compatible = "fixed-clock";
+               #clock-cells = <0>;
+               clock-frequency = <125000000>;
+               clock-output-names = "ext_gmac";
+       };
+
+       io_domains: io-domains {
+               compatible = "rockchip,rk3288-io-voltage-domain";
+               rockchip,grf = <&grf>;
+
+               audio-supply = <&vcca_33>;
+               flash0-supply = <&vcc_flash>;
+               flash1-supply = <&vcc_lan>;
+               gpio30-supply = <&vcc_io>;
+               gpio1830-supply = <&vcc_io>;
+               lcdc-supply = <&vcc_io>;
+               sdcard-supply = <&vccio_sd>;
+               wifi-supply = <&vcc_18>;
+       };
+
+
+       leds {
+               u-boot,dm-pre-reloc;
+               compatible = "gpio-leds";
+
+               work {
+                       u-boot,dm-pre-reloc;
+                       gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
+                       label = "miqi:green:user";
+                       linux,default-trigger = "default-on";
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&led_ctl>;
+               };
+       };
+
+       vcc_flash: flash-regulator {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc_flash";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+               vin-supply = <&vcc_io>;
+       };
+
+       vcc_host: usb-host-regulator {
+               compatible = "regulator-fixed";
+               enable-active-high;
+               gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&host_vbus_drv>;
+               regulator-name = "vcc_host";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               regulator-always-on;
+               vin-supply = <&vcc_sys>;
+       };
+
+       vcc_sd: sdmmc-regulator {
+               compatible = "regulator-fixed";
+               gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&sdmmc_pwr>;
+               regulator-name = "vcc_sd";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               startup-delay-us = <100000>;
+               vin-supply = <&vcc_io>;
+       };
+
+       vcc_sys: vsys-regulator {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc_sys";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               regulator-always-on;
+               regulator-boot-on;
+       };
+};
+
+&cpu0 {
+       cpu0-supply = <&vdd_cpu>;
+};
+
+&emmc {
+       bus-width = <8>;
+       cap-mmc-highspeed;
+       disable-wp;
+       non-removable;
+       num-slots = <1>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
+       vmmc-supply = <&vcc_io>;
+       vqmmc-supply = <&vcc_flash>;
+       status = "okay";
+};
+
+&gmac {
+       assigned-clocks = <&cru SCLK_MAC>;
+       assigned-clock-parents = <&ext_gmac>;
+       clock_in_out = "input";
+       pinctrl-names = "default";
+       pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
+       phy-supply = <&vcc_lan>;
+       phy-mode = "rgmii";
+       snps,reset-active-low;
+       snps,reset-delays-us = <0 10000 1000000>;
+       snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
+       tx_delay = <0x30>;
+       rx_delay = <0x10>;
+       status = "okay";
+};
+
+&hdmi {
+       ddc-i2c-bus = <&i2c5>;
+       status = "okay";
+};
+
+&i2c0 {
+       clock-frequency = <400000>;
+       status = "okay";
+
+       vdd_cpu: syr827@40 {
+               compatible = "silergy,syr827";
+               fcs,suspend-voltage-selector = <1>;
+               reg = <0x40>;
+               regulator-name = "vdd_cpu";
+               regulator-min-microvolt = <850000>;
+               regulator-max-microvolt = <1350000>;
+               regulator-always-on;
+               regulator-boot-on;
+               regulator-enable-ramp-delay = <300>;
+               regulator-ramp-delay = <8000>;
+               vin-supply = <&vcc_sys>;
+       };
+
+       vdd_gpu: syr828@41 {
+               compatible = "silergy,syr828";
+               fcs,suspend-voltage-selector = <1>;
+               reg = <0x41>;
+               regulator-name = "vdd_gpu";
+               regulator-min-microvolt = <850000>;
+               regulator-max-microvolt = <1350000>;
+               regulator-always-on;
+               vin-supply = <&vcc_sys>;
+       };
+
+       hym8563: hym8563@51 {
+               compatible = "haoyu,hym8563";
+               reg = <0x51>;
+               #clock-cells = <0>;
+               clock-frequency = <32768>;
+               clock-output-names = "xin32k";
+       };
+
+       act8846: act8846@5a {
+               compatible = "active-semi,act8846";
+               reg = <0x5a>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pmic_vsel>;
+               system-power-controller;
+
+               vp1-supply = <&vcc_sys>;
+               vp2-supply = <&vcc_sys>;
+               vp3-supply = <&vcc_sys>;
+               vp4-supply = <&vcc_sys>;
+               inl1-supply = <&vcc_sys>;
+               inl2-supply = <&vcc_sys>;
+               inl3-supply = <&vcc_20>;
+
+               regulators {
+                       vcc_ddr: REG1 {
+                               regulator-name = "vcc_ddr";
+                               regulator-always-on;
+                       };
+
+                       vcc_io: REG2 {
+                               regulator-name = "vcc_io";
+                               regulator-min-microvolt = <3300000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-always-on;
+                       };
+
+                       vdd_log: REG3 {
+                               regulator-name = "vdd_log";
+                               regulator-min-microvolt = <1100000>;
+                               regulator-max-microvolt = <1100000>;
+                               regulator-always-on;
+                       };
+
+                       vcc_20: REG4 {
+                               regulator-name = "vcc_20";
+                               regulator-min-microvolt = <2000000>;
+                               regulator-max-microvolt = <2000000>;
+                               regulator-always-on;
+                       };
+
+                       vccio_sd: REG5 {
+                               regulator-name = "vccio_sd";
+                               regulator-min-microvolt = <3300000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-always-on;
+                       };
+
+                       vdd10_lcd: REG6 {
+                               regulator-name = "vdd10_lcd";
+                               regulator-min-microvolt = <1000000>;
+                               regulator-max-microvolt = <1000000>;
+                               regulator-always-on;
+                       };
+
+                       vcca_18: REG7 {
+                               regulator-name = "vcca_18";
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <1800000>;
+                       };
+
+                       vcca_33: REG8 {
+                               regulator-name = "vcca_33";
+                               regulator-min-microvolt = <3300000>;
+                               regulator-max-microvolt = <3300000>;
+                       };
+
+                       vcc_lan: REG9 {
+                               regulator-name = "vcc_lan";
+                               regulator-min-microvolt = <3300000>;
+                               regulator-max-microvolt = <3300000>;
+                       };
+
+                       vdd_10: REG10 {
+                               regulator-name = "vdd_10";
+                               regulator-min-microvolt = <1000000>;
+                               regulator-max-microvolt = <1000000>;
+                               regulator-always-on;
+                       };
+
+                       vcc_18: REG11 {
+                               regulator-name = "vcc_18";
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <1800000>;
+                               regulator-always-on;
+                       };
+
+                       vcc18_lcd: REG12 {
+                               regulator-name = "vcc18_lcd";
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <1800000>;
+                               regulator-always-on;
+                       };
+               };
+       };
+};
+
+&i2c1 {
+       status = "okay";
+};
+
+&i2c2 {
+       status = "okay";
+};
+
+&i2c4 {
+       status = "okay";
+};
+
+&i2c5 {
+       status = "okay";
+};
+
+&pinctrl {
+       pcfg_output_high: pcfg-output-high {
+               output-high;
+       };
+
+       pcfg_output_low: pcfg-output-low {
+               output-low;
+       };
+
+       pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma {
+               bias-pull-up;
+               drive-strength = <12>;
+       };
+
+       act8846 {
+               pmic_int: pmic-int {
+                       rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+               };
+
+               pmic_sleep: pmic-sleep {
+                       rockchip,pins = <0 0 RK_FUNC_GPIO &pcfg_output_low>;
+               };
+
+               pmic_vsel: pmic-vsel {
+                       rockchip,pins = <7 1 RK_FUNC_GPIO &pcfg_output_low>;
+               };
+       };
+
+       gmac {
+               phy_int: phy-int {
+                       rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>;
+               };
+
+               phy_pmeb: phy-pmeb {
+                       rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>;
+               };
+
+               phy_rst: phy-rst {
+                       rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>;
+               };
+       };
+
+       leds {
+               led_ctl: led-ctl {
+                       rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+       };
+
+       sdmmc {
+               /*
+                * Default drive strength isn't enough to achieve even
+                * high-speed mode on firefly board so bump up to 12ma.
+                */
+               sdmmc_bus4: sdmmc-bus4 {
+                       rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
+                                       <6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
+                                       <6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
+                                       <6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
+               };
+
+               sdmmc_clk: sdmmc-clk {
+                       rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>;
+               };
+
+               sdmmc_cmd: sdmmc-cmd {
+                       rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
+               };
+
+               sdmmc_pwr: sdmmc-pwr {
+                       rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+       };
+
+       usb_host {
+               host_vbus_drv: host-vbus-drv {
+                       rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+       };
+};
+
+&saradc {
+       vref-supply = <&vcc_18>;
+       status = "okay";
+};
+
+&sdmmc {
+       bus-width = <4>;
+       cap-mmc-highspeed;
+       cap-sd-highspeed;
+       card-detect-delay = <200>;
+       disable-wp;
+       num-slots = <1>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
+       vmmc-supply = <&vcc_sd>;
+       vqmmc-supply = <&vccio_sd>;
+       status = "okay";
+};
+
+&tsadc {
+       rockchip,hw-tshut-mode = <0>;
+       rockchip,hw-tshut-polarity = <0>;
+       status = "okay";
+};
+
+&uart2 {
+       status = "okay";
+};
+
+&uart3 {
+       status = "okay";
+};
+
+&usbphy {
+       status = "okay";
+};
+
+&usb_host1 {
+       vbus-supply = <&vcc_host>;
+       status = "okay";
+};
+
+&vopb {
+       status = "okay";
+};
+
+&vopb_mmu {
+       status = "okay";
+};
+
+&vopl {
+       status = "okay";
+};
+
+&vopl_mmu {
+       status = "okay";
+};
+
+&wdt {
+       status = "okay";
+};

diff --git a/arch/arm/mach-rockchip/rk3288/Kconfig b/arch/arm/mach-rockchip/rk3288/Kconfig
index 13f7513813e4a271599cb2a9caa768c25fc238a2..8e7355ece4ab7059834c0bd3312560b8dc173a96 100644 (file)
--- a/arch/arm/mach-rockchip/rk3288/Kconfig
+++ b/arch/arm/mach-rockchip/rk3288/Kconfig
@@ -57,6 +57,15 @@ config TARGET_FIREFLY_RK3288
          also includes on-board eMMC and 1GB of SDRAM. Expansion connectors
          provide access to display pins, I2C, SPI, UART and GPIOs.
 
+config TARGET_MIQI_RK3288
+       bool "MiQi-RK3288"
+       select BOARD_LATE_INIT
+       help
+         MiQi-RK3288 is a RK3288-based development board with 4 USB 2.0
+         ports, HDMI, micro-SD card, 16 GB eMMC and Gigabit Ethernet. It
+         has 1 or 2 GiB SDRAM. Expansion connectors provide access to
+         I2C, SPI, UART, GPIOs and fan control.
+
 config TARGET_POPMETAL_RK3288
        bool "PopMetal-RK3288"
        select BOARD_LATE_INIT
@@ -118,6 +127,8 @@ source "board/firefly/firefly-rk3288/Kconfig"
 
 source "board/google/veyron/Kconfig"
 
+source "board/mqmaker/miqi_rk3288/Kconfig"
+
 source "board/radxa/rock2/Kconfig"
 
 source "board/rockchip/evb_rk3288/Kconfig"

diff --git a/board/mqmaker/miqi_rk3288/Kconfig b/board/mqmaker/miqi_rk3288/Kconfig
new file mode 100644 (file)
index 0000000..232a112
--- /dev/null
+++ b/board/mqmaker/miqi_rk3288/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_MIQI_RK3288
+
+config SYS_BOARD
+       default "miqi_rk3288"
+
+config SYS_VENDOR
+       default "mqmaker"
+
+config SYS_CONFIG_NAME
+       default "miqi_rk3288"
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+       def_bool y
+
+endif

diff --git a/board/mqmaker/miqi_rk3288/MAINTAINERS b/board/mqmaker/miqi_rk3288/MAINTAINERS
new file mode 100644 (file)
index 0000000..053a5e6
--- /dev/null
+++ b/board/mqmaker/miqi_rk3288/MAINTAINERS
@@ -0,0 +1,6 @@
+MIQI
+M:     Jernej Skrabec <jernej.skrabec@siol.net>
+S:     Maintained
+F:     board/mqmaker/miqi_rk3288
+F:     include/configs/miqi_rk3288.h
+F:     configs/miqi-rk3288_defconfig

diff --git a/board/mqmaker/miqi_rk3288/Makefile b/board/mqmaker/miqi_rk3288/Makefile
new file mode 100644 (file)
index 0000000..ec95aff
--- /dev/null
+++ b/board/mqmaker/miqi_rk3288/Makefile
@@ -0,0 +1,7 @@
+#
+# (C) Copyright 2016 Rockchip Electronics Co., Ltd
+#
+# SPDX-License-Identifier:     GPL-2.0+
+#
+
+obj-y  += miqi-rk3288.o

diff --git a/board/mqmaker/miqi_rk3288/miqi-rk3288.c b/board/mqmaker/miqi_rk3288/miqi-rk3288.c
new file mode 100644 (file)
index 0000000..a82f0ae
--- /dev/null
+++ b/board/mqmaker/miqi_rk3288/miqi-rk3288.c
@@ -0,0 +1,15 @@
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <spl.h>
+
+void board_boot_order(u32 *spl_boot_list)
+{
+       /* eMMC prior to sdcard. */
+       spl_boot_list[0] = BOOT_DEVICE_MMC2;
+       spl_boot_list[1] = BOOT_DEVICE_MMC1;
+}

diff --git a/configs/miqi-rk3288_defconfig b/configs/miqi-rk3288_defconfig
new file mode 100644 (file)
index 0000000..203824b
--- /dev/null
+++ b/configs/miqi-rk3288_defconfig
@@ -0,0 +1,73 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_ROCKCHIP_RK3288=y
+CONFIG_ROCKCHIP_SPL_BACK_TO_BROM=y
+CONFIG_TARGET_MIQI_RK3288=y
+CONFIG_SPL_STACK_R_ADDR=0x80000
+CONFIG_DEFAULT_DEVICE_TREE="rk3288-miqi"
+CONFIG_SILENT_CONSOLE=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_GPIO=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_ISO_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SPL_PARTITION_UUIDS=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_SPL_SYSCON=y
+# CONFIG_SPL_SIMPLE_BUS is not set
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+# CONFIG_SPL_PINCTRL_FULL is not set
+CONFIG_ROCKCHIP_RK3288_PINCTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_ACT8846=y
+CONFIG_REGULATOR_ACT8846=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_RAM=y
+CONFIG_SPL_RAM=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_BASE=0xff690000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550=y
+CONFIG_ROCKCHIP_SERIAL=y
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_DM_VIDEO=y
+CONFIG_DISPLAY=y
+CONFIG_VIDEO_ROCKCHIP=y
+CONFIG_CONSOLE_SCROLL_LINES=10
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_CMD_DHRYSTONE=y
+CONFIG_ERRNO_STR=y

diff --git a/doc/README.rockchip b/doc/README.rockchip
index 97c62f1733e32c5a5916296f132c417517285032..2d8cf9fae02ea98d54ffd883e06ac65d61092c20 100644 (file)
--- a/doc/README.rockchip
+++ b/doc/README.rockchip
@@ -36,12 +36,13 @@ You will need:
 Building
 ========
 
-At present seven RK3288 boards are supported:
+At present eight RK3288 boards are supported:
 
    - EVB RK3288 - use evb-rk3288 configuration
    - Fennec RK3288 - use fennec-rk3288 configuration
    - Firefly RK3288 - use firefly-rk3288 configuration
    - Hisense Chromebook - use chromebook_jerry configuration
+   - MiQi RK3288 - use miqi-rk3288 configuration
    - PopMetal RK3288 - use popmetal-rk3288 configuration
    - Radxa Rock 2 - use rock2 configuration
    - Tinker RK3288 - use tinker-rk3288 configuration

diff --git a/include/configs/miqi_rk3288.h b/include/configs/miqi_rk3288.h
new file mode 100644 (file)
index 0000000..f686042
--- /dev/null
+++ b/include/configs/miqi_rk3288.h
@@ -0,0 +1,22 @@
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define ROCKCHIP_DEVICE_SETTINGS \
+               "stdin=serial,cros-ec-keyb\0" \
+               "stdout=serial,vidconsole\0" \
+               "stderr=serial,vidconsole\0"
+
+#include <configs/rk3288_common.h>
+
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 0
+
+#define CONFIG_SYS_WHITE_ON_BLACK
+
+#endif