colibri-imx8x: drop obsolete environment variables

Drop obsolete environment variables boot_file, bootcmd_mfg,
fdt_addr, finduuid, image, mfgtool_args, mmcargs, mmcdev, mmcpart,
panel, sec_boot, vidargs.

Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>

diff --git a/include/configs/colibri-imx8x.h b/include/configs/colibri-imx8x.h
index 9a4a5f3b5de66ca0b5a753f389d1466b4ad87615..94243117f1cc5e80ec3221feba579cb98492b3d8 100644 (file)
--- a/include/configs/colibri-imx8x.h
+++ b/include/configs/colibri-imx8x.h
@@ -8,7 +8,6 @@
 
 #include <asm/arch/imx-regs.h>
 #include <linux/sizes.h>
-#include <linux/stringify.h>
 
 #define MEM_LAYOUT_ENV_SETTINGS \
        "fdt_addr_r=0x83000000\0" \
@@ -16,12 +15,6 @@
        "ramdisk_addr_r=0x83800000\0" \
        "scriptaddr=0x80800000\0"
 
-#ifdef CONFIG_AHAB_BOOT
-#define AHAB_ENV "sec_boot=yes\0"
-#else
-#define AHAB_ENV "sec_boot=no\0"
-#endif
-
 /* Boot M4 */
 #define M4_BOOT_ENV \
        "m4_0_image=m4_0.bin\0" \
@@ -29,8 +22,6 @@
                "${m4_0_image}\0" \
        "m4boot_0=run loadm4image_0; dcache flush; bootaux ${loadaddr} 0\0" \
 
-#define MFG_NAND_PARTITION ""
-
 /* Enable Distro Boot */
 #define BOOT_TARGET_DEVICES(func) \
        func(MMC, mmc, 1) \
@@ -38,47 +29,23 @@
        func(DHCP, dhcp, na)
 #include <config_distro_bootcmd.h>
 
-#define CFG_MFG_ENV_SETTINGS \
-       "mfgtool_args=setenv bootargs ${consoleargs} " \
-               "rdinit=/linuxrc g_mass_storage.stall=0 " \
-               "g_mass_storage.removable=1 g_mass_storage.idVendor=0x066F " \
-               "g_mass_storage.idProduct=0x37FF " \
-               "g_mass_storage.iSerialNumber=\"\" " MFG_NAND_PARTITION \
-               "${vidargs} clk_ignore_unused\0" \
-       "initrd_addr=0x83800000\0" \
-       "initrd_high=0xffffffff\0" \
-       "bootcmd_mfg=run mfgtool_args;booti ${loadaddr} ${initrd_addr} " \
-               "${fdt_addr};\0" \
-
 /* Initial environment variables */
 #define CFG_EXTRA_ENV_SETTINGS \
-       AHAB_ENV \
        BOOTENV \
-       CFG_MFG_ENV_SETTINGS \
        M4_BOOT_ENV \
        MEM_LAYOUT_ENV_SETTINGS \
-       "boot_file=Image\0" \
        "boot_script_dhcp=boot.scr\0" \
        "console=ttyLP3\0" \
-       "fdt_addr=0x83000000\0" \
        "fdt_board=eval-v3\0" \
-       "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
-       "image=Image\0" \
        "initrd_addr=0x83800000\0" \
        "initrd_high=0xffffffffffffffff\0" \
-       "mmcargs=setenv bootargs ${consoleargs} " \
-               "root=PARTUUID=${uuid} rootwait " \
-       "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
-       "mmcpart=1\0" \
-       "panel=NULL\0" \
        "setup=setenv setupargs console=tty1 console=${console},${baudrate} " \
                "consoleblank=0 earlycon\0" \
        "update_uboot=askenv confirm Did you load flash.bin resp. u-boot-dtb.imx (y/N)?; " \
                "if test \"$confirm\" = \"y\"; then " \
                "setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \
                "${blkcnt} / 0x200; mmc dev 0 1; mmc write ${loadaddr} 0x0 " \
-               "${blkcnt}; fi\0" \
-       "vidargs=video=imxdpufb5:off video=imxdpufb6:off video=imxdpufb7:off\0"
+               "${blkcnt}; fi\0"
 
 #define CFG_SYS_SDRAM_BASE             0x80000000
 #define PHYS_SDRAM_1                   0x80000000