configs: at91: sam9x60ek: enable QSPI and SF command

Add the configurations required for enabling QSPI and the SF command
to allow changes to be made dynamically to serial flash devices from
the command line interface.

Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>

diff --git a/configs/sam9x60ek_mmc_defconfig b/configs/sam9x60ek_mmc_defconfig
index 9c9166c16c93c0221abee5eaf96f69bc41af5c6e..718db00a11a419e7e0b232ec2b53292343b28a39 100644 (file)
--- a/configs/sam9x60ek_mmc_defconfig
+++ b/configs/sam9x60ek_mmc_defconfig
@@ -37,6 +37,7 @@ CONFIG_CMD_DM=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_SF_TEST=y
 CONFIG_CMD_NAND=y
 CONFIG_CMD_NAND_TRIMFFS=y
 # CONFIG_CMD_SETEXPR is not set
@@ -67,6 +68,8 @@ CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ATMEL=y
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
+CONFIG_SF_DEFAULT_MODE=0x0
+CONFIG_SF_DEFAULT_SPEED=50000000
 CONFIG_NAND_ATMEL=y
 CONFIG_ATMEL_NAND_HW_PMECC=y
 CONFIG_PMECC_CAP=8
@@ -88,3 +91,13 @@ CONFIG_W1_GPIO=y
 CONFIG_W1_EEPROM=y
 CONFIG_W1_EEPROM_DS24XXX=y
 CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_SPI_FLASH=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_ATMEL_QSPI=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_SST=y
+CONFIG_SPI_FLASH_MTD=y

diff --git a/configs/sam9x60ek_nandflash_defconfig b/configs/sam9x60ek_nandflash_defconfig
index f07725de36c19e9e4da376fd5e46c1c4c8b95d80..00ce9df1a691024895e0e85e86349c0edb0cd550 100644 (file)
--- a/configs/sam9x60ek_nandflash_defconfig
+++ b/configs/sam9x60ek_nandflash_defconfig
@@ -37,6 +37,7 @@ CONFIG_CMD_DM=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
+CONFIG_CMD_SF_TEST=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y
 CONFIG_CMD_NAND_TRIMFFS=y
@@ -73,6 +74,15 @@ CONFIG_ATMEL_NAND_HW_PMECC=y
 CONFIG_PMECC_CAP=8
 CONFIG_SYS_NAND_ONFI_DETECTION=y
 CONFIG_PHY_MICREL=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SF_DEFAULT_BUS=0
+CONFIG_SF_DEFAULT_SPEED=50000000
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPI_FLASH_ATMEL=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_SST=y
 CONFIG_DM_ETH=y
 CONFIG_MACB=y
 CONFIG_PINCTRL=y
@@ -82,6 +92,9 @@ CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_SYSRESET=y
 CONFIG_SYSRESET_AT91=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_ATMEL_QSPI=y
 CONFIG_TIMER=y
 CONFIG_ATMEL_PIT_TIMER=y
 CONFIG_W1=y