rockchip: jaguar-rk3588: enable SARADC and derivatives

The SARADC is used on Jaguar for multiple things:
- channel 0 is used (at runtime) as a BIOS button,
- channel 2 is exposed on the Mezzanine connector for customer specific
  logic,
- channel 5 and 6 are used for identification,

Since the SARADC requires a vref-supply provided by the RK806 PMIC, its
support and the support for its regulators are also enabled.

The button, adc, pmic and regulator commands are also enabled for CLI
use in U-Boot for debugging and scripting purposes.

The RK806 PMIC on Jaguar being routed on the SPI bus, let's enable
Rockchip SPI controller driver.

Finally, the SARADC channel 1 on Jaguar is hardwired so will never
change in the lifetime of a unit, for that reason, disable the Rockchip
Download Mode check by setting ROCKCHIP_BOOT_MODE_REG symbol to 0.

Cc: Quentin Schulz <foss+uboot@0leil.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>

diff --git a/configs/jaguar-rk3588_defconfig b/configs/jaguar-rk3588_defconfig
index 92800dc31e5fd0a798dd12a37874a34ae7cab756..3233b75cee927043f370709ad21781995fd14f9a 100644 (file)
--- a/configs/jaguar-rk3588_defconfig
+++ b/configs/jaguar-rk3588_defconfig
@@ -9,6 +9,7 @@ CONFIG_SF_DEFAULT_MODE=0x2000
 CONFIG_ENV_SIZE=0x1f000
 CONFIG_DEFAULT_DEVICE_TREE="rk3588-jaguar"
 CONFIG_ROCKCHIP_RK3588=y
+CONFIG_ROCKCHIP_BOOT_MODE_REG=0x0
 CONFIG_SPL_SERIAL=y
 CONFIG_TARGET_JAGUAR_RK3588=y
 CONFIG_DEBUG_UART_BASE=0xfeb50000
@@ -34,6 +35,7 @@ CONFIG_SPL_ATF=y
 # CONFIG_BOOTM_RTEMS is not set
 # CONFIG_BOOTM_VXWORKS is not set
 # CONFIG_CMD_ELF is not set
+CONFIG_CMD_ADC=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
@@ -46,6 +48,7 @@ CONFIG_CMD_USB=y
 # CONFIG_CMD_MII is not set
 # CONFIG_CMD_BLOCK_CACHE is not set
 # CONFIG_CMD_EFICONFIG is not set
+CONFIG_CMD_PMIC=y
 CONFIG_CMD_REGULATOR=y
 CONFIG_CMD_EROFS=y
 CONFIG_CMD_SQUASHFS=y
@@ -60,7 +63,8 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_SPL_REGMAP=y
 CONFIG_SPL_SYSCON=y
-# CONFIG_SARADC_ROCKCHIP is not set
+CONFIG_BUTTON=y
+CONFIG_BUTTON_ADC=y
 CONFIG_SPL_CLK=y
 CONFIG_CLK_GPIO=y
 CONFIG_ROCKCHIP_GPIO=y
@@ -88,10 +92,14 @@ CONFIG_DWC_ETH_QOS=y
 CONFIG_DWC_ETH_QOS_ROCKCHIP=y
 CONFIG_PHY_ROCKCHIP_INNO_USB2=y
 CONFIG_SPL_PINCTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_RK8XX=y
 CONFIG_SPL_RAM=y
 CONFIG_SCSI=y
 CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_SYS_NS16550_MEM32=y
+CONFIG_ROCKCHIP_SPI=y
 CONFIG_SYSRESET=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y