This reverts commit
232ed3ca534708527a9515c7c41bc3542949525c.
In exynos boards, ${console} is used to set bootargs but it sets
without "console=", so CONFIG_DEFAULT_CONSOLE for these boards is
designated with "console=" but it is removed. So revert the commit.
References for using ${console} in
board/samsung/common/bootscripts/autoboot.cmd
board/samsung/common/bootscripts/bootzimg.cmd
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
/* Console configuration */
#define CONFIG_BOOTCOMMAND "run distro_bootcmd ; run autoboot"
-#define CONFIG_DEFAULT_CONSOLE "ttySAC1,115200n8"
+#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
- GENERATED_GBL_DATA_SIZE)
"elif test -e mmc 0 uImage; then; " \
"run boot_uimg;" \
"fi;\0" \
- "console=" CONFIG_DEFAULT_CONSOLE "\0" \
+ "console=" CONFIG_DEFAULT_CONSOLE \
"mmcbootdev=0\0" \
"mmcbootpart=1\0" \
"mmcrootdev=0\0" \
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000)
-#define CONFIG_DEFAULT_CONSOLE "ttySAC2,115200n8"
+#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
/* USB */
#define CONFIG_USB_EHCI_EXYNOS
MEM_LAYOUT_ENV_SETTINGS \
BOOTENV \
"rootfstype=ext4\0" \
- "console=" CONFIG_DEFAULT_CONSOLE "\0"\
+ "console=" CONFIG_DEFAULT_CONSOLE \
"fdtfile=exynos5422-odroidxu3.dtb\0" \
"boardname=odroidxu3\0" \
"mmcbootdev=0\0" \
#define CONFIG_BOOTCOMMAND "run mmcboot"
-#define CONFIG_DEFAULT_CONSOLE "ttySAC2,115200n8"
+#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
#define CONFIG_RAMDISK_BOOT "root=/dev/ram0 rw rootfstype=ext4" \
" ${console} ${meminfo}"
"bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
"verify=n\0" \
"rootfstype=ext4\0" \
- "console=" CONFIG_DEFAULT_CONSOLE "\0"\
+ "console=" CONFIG_DEFAULT_CONSOLE \
"meminfo=mem=80M mem=256M@0x40000000 mem=128M@0x50000000\0" \
"loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x30007FC0 uImage\0" \
"mmcdev=0\0" \
/* Console configuration */
#define CONFIG_BOOTCOMMAND "run mmcboot"
-#define CONFIG_DEFAULT_CONSOLE "ttySAC1,115200n8"
+#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
- GENERATED_GBL_DATA_SIZE)
"mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
"verify=n\0" \
"rootfstype=ext4\0" \
- "console=" CONFIG_DEFAULT_CONSOLE "\0" \
+ "console=" CONFIG_DEFAULT_CONSOLE \
"mtdparts=" CONFIG_MTDPARTS_DEFAULT \
"mbrparts=" MBRPARTS_DEFAULT \
"meminfo=crashkernel=32M@0x50000000\0" \
#define CONFIG_MACH_TYPE MACH_TYPE_TRATS
#define CONFIG_BOOTCOMMAND "run autoboot"
-#define CONFIG_DEFAULT_CONSOLE "ttySAC2,115200n8"
+#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
- GENERATED_GBL_DATA_SIZE)
"mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
"verify=n\0" \
"rootfstype=ext4\0" \
- "console=" CONFIG_DEFAULT_CONSOLE "\0" \
+ "console=" CONFIG_DEFAULT_CONSOLE \
"meminfo=crashkernel=32M@0x50000000\0" \
"nfsroot=/nfsroot/arm\0" \
"bootblock=" CONFIG_BOOTBLOCK "\0" \
/* Console configuration */
#define CONFIG_BOOTCOMMAND "run autoboot"
-#define CONFIG_DEFAULT_CONSOLE "ttySAC2,115200n8"
+#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
- GENERATED_GBL_DATA_SIZE)
"boottrace=setenv opts initcall_debug; run bootcmd\0" \
"verify=n\0" \
"rootfstype=ext4\0" \
- "console=" CONFIG_DEFAULT_CONSOLE "\0" \
+ "console=" CONFIG_DEFAULT_CONSOLE \
"kernelname=uImage\0" \
"loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 " \
"${kernelname}\0" \