]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
ARM: imx: vining2000: Enable DM Serial
authorMarek Vasut <marex@denx.de>
Fri, 17 May 2019 20:25:28 +0000 (22:25 +0200)
committerStefano Babic <sbabic@denx.de>
Tue, 11 Jun 2019 08:42:48 +0000 (10:42 +0200)
Enable DM Serial support on iMX6SX VINING|2000.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Silvio Fricke <silvio.fricke@softing.com>
Cc: Stefano Babic <sbabic@denx.de>
board/softing/vining_2000/vining_2000.c
configs/vining_2000_defconfig
include/configs/vining_2000.h

index d960773671e50cee7fa0e25a30c6c283c5d7668c..19b9b3727610f7db7bd27a4b72e0c0010f3d8ce6 100644 (file)
@@ -71,11 +71,6 @@ int dram_init(void)
        return 0;
 }
 
-static iomux_v3_cfg_t const uart1_pads[] = {
-       MX6_PAD_GPIO1_IO04__UART1_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
-       MX6_PAD_GPIO1_IO05__UART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
-};
-
 static iomux_v3_cfg_t const fec1_pads[] = {
        MX6_PAD_ENET1_MDC__ENET1_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
        MX6_PAD_ENET1_MDIO__ENET1_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
@@ -97,11 +92,6 @@ static iomux_v3_cfg_t const pwm_led_pads[] = {
        MX6_PAD_RGMII2_RD3__PWM1_OUT | MUX_PAD_CTRL(NO_PAD_CTRL), /* blue */
 };
 
-static void setup_iomux_uart(void)
-{
-       imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
-}
-
 #define PHY_RESET IMX_GPIO_NR(5, 9)
 
 int board_eth_init(bd_t *bis)
@@ -419,8 +409,6 @@ int board_late_init(void)
 
 int board_early_init_f(void)
 {
-       setup_iomux_uart();
-
        setup_iomux_usb();
 
        return 0;
index 0a2b042ed121b289917810d44df760616480c600..9e8326e7711cd28301d3af415b28c19137064947 100644 (file)
@@ -49,6 +49,9 @@ CONFIG_PCI=y
 CONFIG_DM_PCI=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX6=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
+CONFIG_DM_SERIAL=y
+CONFIG_MXC_UART=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
index fd98c1417e7040ac36bb8dd5aa851c1dbf5f1822..d4db9b4a567187894e62ab3dcb567d6bf0183b15 100644 (file)
@@ -17,9 +17,6 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (3 * SZ_1M)
 
-#define CONFIG_MXC_UART
-#define CONFIG_MXC_UART_BASE           UART1_BASE
-
 #define BOOT_TARGET_DEVICES(func) \
        func(MMC, mmc, 0) \
        func(MMC, mmc, 1) \