imx8ulp_evk: Change to use DDR driver

Remove the DDR initialization codes from board and enable the iMX8ULP
DDR driver.

Signed-off-by: Ye Li <ye.li@nxp.com>

diff --git a/arch/arm/mach-imx/imx8ulp/Kconfig b/arch/arm/mach-imx/imx8ulp/Kconfig
index bbdeaac07b359e54b0a62b7882c8cd69e6388a2b..c1c1aa08c52523a5b420517c095641fa153eb877 100644 (file)
--- a/arch/arm/mach-imx/imx8ulp/Kconfig
+++ b/arch/arm/mach-imx/imx8ulp/Kconfig
@@ -20,6 +20,7 @@ config TARGET_IMX8ULP_EVK
        bool "imx8ulp_evk"
        select IMX8ULP
        select SUPPORT_SPL
+       select IMX8ULP_DRAM
 
 endchoice
 

diff --git a/board/freescale/imx8ulp_evk/Makefile b/board/freescale/imx8ulp_evk/Makefile
index b6ca238de5d9e44920eb58685445935e1350fbcf..1cf148ab9106e8792c2f0c38c5e816b2d467787f 100644 (file)
--- a/board/freescale/imx8ulp_evk/Makefile
+++ b/board/freescale/imx8ulp_evk/Makefile
@@ -3,7 +3,7 @@
 obj-y   += imx8ulp_evk.o
 
 ifdef CONFIG_SPL_BUILD
-obj-y += spl.o ddr_init.o
+obj-y += spl.o
 ifdef CONFIG_IMX8ULP_ND_MODE
 obj-y += lpddr4_timing_264.o
 else

diff --git a/board/freescale/imx8ulp_evk/ddr_init.c b/board/freescale/imx8ulp_evk/ddr_init.c
deleted file mode 100644 (file)
index f4238d2..0000000
--- a/board/freescale/imx8ulp_evk/ddr_init.c
+++ /dev/null
@@ -1,207 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Copyright 2021 NXP
- */
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/ddr.h>
-#include <asm/arch/imx-regs.h>
-
-#define DENALI_CTL_00          (DDR_CTL_BASE_ADDR)
-#define CTL_START              0x1
-
-#define DENALI_CTL_03          (DDR_CTL_BASE_ADDR + 4 * 3)
-#define DENALI_CTL_197         (DDR_CTL_BASE_ADDR + 4 * 197)
-#define DENALI_CTL_250         (DDR_CTL_BASE_ADDR + 4 * 250)
-#define DENALI_CTL_251         (DDR_CTL_BASE_ADDR + 4 * 251)
-#define DENALI_CTL_266         (DDR_CTL_BASE_ADDR + 4 * 266)
-#define DFI_INIT_COMPLETE      0x2
-
-#define DENALI_CTL_614         (DDR_CTL_BASE_ADDR + 4 * 614)
-#define DENALI_CTL_615         (DDR_CTL_BASE_ADDR + 4 * 615)
-
-#define DENALI_PI_00           (DDR_PI_BASE_ADDR)
-#define PI_START               0x1
-
-#define DENALI_PI_04           (DDR_PI_BASE_ADDR + 4 * 4)
-#define DENALI_PI_11           (DDR_PI_BASE_ADDR + 4 * 11)
-#define DENALI_PI_12           (DDR_PI_BASE_ADDR + 4 * 12)
-#define DENALI_CTL_23          (DDR_CTL_BASE_ADDR + 4 * 23)
-#define DENALI_CTL_25          (DDR_CTL_BASE_ADDR + 4 * 25)
-
-#define DENALI_PHY_1624                (DDR_PHY_BASE_ADDR + 4 * 1624)
-#define DENALI_PHY_1537                (DDR_PHY_BASE_ADDR + 4 * 1537)
-#define PHY_FREQ_SEL_MULTICAST_EN(X)   ((X) << 8)
-#define PHY_FREQ_SEL_INDEX(X)          ((X) << 16)
-
-#define DENALI_PHY_1547                (DDR_PHY_BASE_ADDR + 4 * 1547)
-#define DENALI_PHY_1555                (DDR_PHY_BASE_ADDR + 4 * 1555)
-#define DENALI_PHY_1564                (DDR_PHY_BASE_ADDR + 4 * 1564)
-#define DENALI_PHY_1565                (DDR_PHY_BASE_ADDR + 4 * 1565)
-
-int ddr_calibration(unsigned int fsp_table[3])
-{
-       u32 reg_val;
-       u32 int_status_init, phy_freq_req, phy_freq_type;
-       u32 lock_0, lock_1, lock_2;
-       u32 freq_chg_pt, freq_chg_cnt;
-
-       reg_val = readl(DENALI_CTL_250);
-       if (((reg_val >> 16) & 0x3) == 1)
-               freq_chg_cnt = 2;
-       else
-               freq_chg_cnt = 3;
-
-       reg_val = readl(DENALI_PI_12);
-       if (reg_val == 0x3) {
-               freq_chg_pt = 1;
-       } else if (reg_val == 0x7) {
-               freq_chg_pt = 2;
-       } else {
-               printf("frequency map(0x%x) is wrong, please check!\r\n", reg_val);
-               return -1;
-       }
-
-       debug("%s\n", __func__);
-
-       /* Assert PI_START parameter and then assert START parameter in Controller. */
-       reg_val = readl(DENALI_PI_00) | PI_START;
-       writel(reg_val, DENALI_PI_00);
-
-       reg_val = readl(DENALI_CTL_00) | CTL_START;
-       writel(reg_val, DENALI_CTL_00);
-
-       /* Poll for init_done_bit in Controller interrupt status register (INT_STATUS_INIT) */
-       do {
-               if (!freq_chg_cnt) {
-                       int_status_init = (readl(DENALI_CTL_266) >> 8) & 0xff;
-                       /* DDR subsystem is ready for traffic. */
-                       if (int_status_init & DFI_INIT_COMPLETE) {
-                               printf("complete\n");
-                               break;
-                       }
-               }
-
-               /*
-                * During leveling, PHY will request for freq change and SoC clock
-                * logic should provide requested frequency, Polling SIM LPDDR_CTRL2
-                * Bit phy_freq_chg_req until be 1'b1
-                */
-               reg_val = readl(AVD_SIM_LPDDR_CTRL2);
-               phy_freq_req = (reg_val >> 7) & 0x1;
-
-               if (phy_freq_req) {
-                       phy_freq_type = reg_val & 0x1F;
-                       if (!phy_freq_type) {
-                               printf("Poll for freq_chg_req on SIM register and change to F0 frequency.\n");
-                               set_ddr_clk(fsp_table[phy_freq_type] >> 1);
-
-                               /* Write 1'b1 at LPDDR_CTRL2 bit phy_freq_cfg_ack */
-                               reg_val = readl(AVD_SIM_LPDDR_CTRL2);
-                               writel(reg_val | (0x1 << 6), AVD_SIM_LPDDR_CTRL2);
-                       } else if (phy_freq_type == 0x01) {
-                               printf("Poll for freq_chg_req on SIM register and change to F1 frequency.\n");
-                               set_ddr_clk(fsp_table[phy_freq_type] >> 1);
-
-                               /* Write 1'b1 at LPDDR_CTRL2 bit phy_freq_cfg_ack */
-                               reg_val = readl(AVD_SIM_LPDDR_CTRL2);
-                               writel(reg_val | (0x1 << 6), AVD_SIM_LPDDR_CTRL2);
-                               if (freq_chg_pt == 1)
-                                       freq_chg_cnt--;
-                       } else if (phy_freq_type == 0x02) {
-                               printf("Poll for freq_chg_req on SIM register and change to F2 frequency.\n");
-                               set_ddr_clk(fsp_table[phy_freq_type] >> 1);
-
-                               /* Write 1'b1 at LPDDR_CTRL2 bit phy_freq_cfg_ack */
-                               reg_val = readl(AVD_SIM_LPDDR_CTRL2);
-                               writel(reg_val | (0x1 << 6), AVD_SIM_LPDDR_CTRL2);
-                               if (freq_chg_pt == 2)
-                                       freq_chg_cnt--;
-                       }
-                       reg_val = readl(AVD_SIM_LPDDR_CTRL2);
-               }
-       } while (1);
-
-       /* Check PLL lock status */
-       lock_0 = readl(DENALI_PHY_1564) & 0xffff;
-       lock_1 = (readl(DENALI_PHY_1564) >> 16) & 0xffff;
-       lock_2 = readl(DENALI_PHY_1565) & 0xffff;
-
-       if ((lock_0 & 0x3) != 0x3 || (lock_1 & 0x3) != 0x3 || (lock_2 & 0x3) != 0x3) {
-               printf("De-Skew PLL failed to lock\n");
-               printf("lock_0=0x%x, lock_1=0x%x, lock_2=0x%x\n", lock_0, lock_1, lock_2);
-               return -1;
-       }
-
-       printf("De-Skew PLL is locked and ready\n");
-       return 0;
-}
-
-int ddr_init(struct dram_timing_info2 *dram_timing)
-{
-       int i;
-
-       debug("%s\n", __func__);
-
-       set_ddr_clk(dram_timing->fsp_table[0] >> 1); /* Set to boot freq */
-
-       /* Initialize CTL registers */
-       for (i = 0; i < dram_timing->ctl_cfg_num; i++)
-               writel(dram_timing->ctl_cfg[i].val, (ulong)dram_timing->ctl_cfg[i].reg);
-
-       /* Initialize PI registers */
-       for (i = 0; i < dram_timing->pi_cfg_num; i++)
-               writel(dram_timing->pi_cfg[i].val, (ulong)dram_timing->pi_cfg[i].reg);
-
-       /* Write PHY regiters for all 3 frequency points (48Mhz/384Mhz/528Mhz): f1_index=0 */
-       writel(PHY_FREQ_SEL_MULTICAST_EN(1) | PHY_FREQ_SEL_INDEX(0), DENALI_PHY_1537);
-       for (i = 0; i < dram_timing->phy_f1_cfg_num; i++)
-               writel(dram_timing->phy_f1_cfg[i].val, (ulong)dram_timing->phy_f1_cfg[i].reg);
-
-       /* Write PHY regiters for freqency point 2 (528Mhz): f2_index=1 */
-       writel(PHY_FREQ_SEL_MULTICAST_EN(0) | PHY_FREQ_SEL_INDEX(1), DENALI_PHY_1537);
-       for (i = 0; i < dram_timing->phy_f2_cfg_num; i++)
-               writel(dram_timing->phy_f2_cfg[i].val, (ulong)dram_timing->phy_f2_cfg[i].reg);
-
-       /* Re-enable MULTICAST mode */
-       writel(PHY_FREQ_SEL_MULTICAST_EN(1) | PHY_FREQ_SEL_INDEX(0), DENALI_PHY_1537);
-
-       return ddr_calibration(dram_timing->fsp_table);
-}
-
-void enable_bypass_mode(void)
-{
-       u32 reg_val;
-
-       /* PI_INIT_LVL_EN=0x0 (DENALI_PI_04) */
-       reg_val = readl(DENALI_PI_04) & ~0x1;
-       writel(reg_val, DENALI_PI_04);
-
-       /* PI_FREQ_MAP=0x1 (DENALI_PI_12) */
-       writel(0x1, DENALI_PI_12);
-
-       /* PI_INIT_WORK_FREQ=0x0 (DENALI_PI_11) */
-       reg_val = readl(DENALI_PI_11) & ~(0x1f << 8);
-       writel(reg_val, DENALI_PI_11);
-
-       /* DFIBUS_FREQ_INIT=0x0 (DENALI_CTL_23) */
-       reg_val = readl(DENALI_CTL_23) & ~(0x3 << 24);
-       writel(reg_val, DENALI_CTL_23);
-
-       /* PHY_LP4_BOOT_DISABLE=0x0 (DENALI_PHY_1547) */
-       reg_val = readl(DENALI_PHY_1547) & ~(0x1 << 8);
-       writel(reg_val, DENALI_PHY_1547);
-
-       /* PHY_PLL_BYPASS=0x1 (DENALI_PHY_1624) */
-       reg_val = readl(DENALI_PHY_1624) | 0x1;
-       writel(reg_val, DENALI_PHY_1624);
-
-       /* PHY_LP4_BOOT_PLL_BYPASS to 0x1 (DENALI_PHY_1555) */
-       reg_val = readl(DENALI_PHY_1555) | 0x1;
-       writel(reg_val, DENALI_PHY_1555);
-
-       /* FREQ_CHANGE_TYPE_F0 = 0x0/FREQ_CHANGE_TYPE_F1 = 0x1/FREQ_CHANGE_TYPE_F2 = 0x2 */
-       reg_val = 0x020100;
-       writel(reg_val, DENALI_CTL_25);
-}