Synchronize stm32f7 device tree with kernel v4.20.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
/*
- * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
- * Author(s): Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
sdio_pins: sdio_pins@0 {
pins {
- pinmux = <STM32_PINMUX('C', 8, AF12)>,
- <STM32_PINMUX('C', 9, AF12)>,
- <STM32_PINMUX('C', 10, AF12)>,
- <STM32_PINMUX('c', 11, AF12)>,
- <STM32_PINMUX('C', 12, AF12)>,
- <STM32_PINMUX('D', 2, AF12)>;
+ pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDIO_D0 */
+ <STM32_PINMUX('C', 9, AF12)>, /* SDIO_D1 */
+ <STM32_PINMUX('C', 10, AF12)>, /* SDIO_D2 */
+ <STM32_PINMUX('C', 11, AF12)>, /* SDIO_D3 */
+ <STM32_PINMUX('C', 12, AF12)>, /* SDIO_CK */
+ <STM32_PINMUX('D', 2, AF12)>; /* SDIO_CMD */
drive-push-pull;
slew-rate = <2>;
};
sdio_pins_od: sdio_pins_od@0 {
pins1 {
- pinmux = <STM32_PINMUX('C', 8, AF12)>,
- <STM32_PINMUX('C', 9, AF12)>,
- <STM32_PINMUX('C', 10, AF12)>,
- <STM32_PINMUX('C', 11, AF12)>,
- <STM32_PINMUX('C', 12, AF12)>;
+ pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDIO_D0 */
+ <STM32_PINMUX('C', 9, AF12)>, /* SDIO_D1 */
+ <STM32_PINMUX('C', 10, AF12)>, /* SDIO_D2 */
+ <STM32_PINMUX('C', 11, AF12)>, /* SDIO_D3 */
+ <STM32_PINMUX('C', 12, AF12)>; /* SDIO_CK */
drive-push-pull;
slew-rate = <2>;
};
pins2 {
- pinmux = <STM32_PINMUX('D', 2, AF12)>;
+ pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDIO_CMD */
drive-open-drain;
slew-rate = <2>;
};
/*
- * Copyright (C) 2015, STMicroelectronics - All Rights Reserved
- * Author(s): Maxime Coquelin <mcoquelin.stm32@gmail.com> for STMicroelectronics.
+ * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
gpio_keys {
compatible = "gpio-keys";
+ #address-cells = <1>;
#size-cells = <0>;
autorepeat;
button@0 {
/*
- * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
- * Author(s): Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
/*
- * Copyright (C) 2015, STMicroelectronics - All Rights Reserved
- * Author(s): Maxime Coquelin <mcoquelin.stm32@gmail.com> for STMicroelectronics.
+ * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
};
timers13: timers@40001c00 {
+ #address-cells = <1>;
#size-cells = <0>;
compatible = "st,stm32-timers";
reg = <0x40001C00 0x400>;
};
timers14: timers@40002000 {
+ #address-cells = <1>;
#size-cells = <0>;
compatible = "st,stm32-timers";
reg = <0x40002000 0x400>;
interrupt-parent = <&exti>;
interrupts = <17 1>;
interrupt-names = "alarm";
- st,syscfg = <&pwrcfg>;
+ st,syscfg = <&pwrcfg 0x00 0x100>;
status = "disabled";
};
compatible = "st,stm32-iwdg";
reg = <0x40003000 0x400>;
clocks = <&clk_lsi>;
+ clock-names = "lsi";
status = "disabled";
};
};
};
+ sdio: sdio@40012c00 {
+ compatible = "arm,pl180", "arm,primecell";
+ arm,primecell-periphid = <0x00880180>;
+ reg = <0x40012c00 0x400>;
+ clocks = <&rcc 0 STM32F4_APB2_CLOCK(SDIO)>;
+ clock-names = "apb_pclk";
+ interrupts = <49>;
+ max-frequency = <48000000>;
+ status = "disabled";
+ };
+
syscfg: system-config@40013800 {
compatible = "syscon";
reg = <0x40013800 0x400>;
};
timers10: timers@40014400 {
+ #address-cells = <1>;
#size-cells = <0>;
compatible = "st,stm32-timers";
reg = <0x40014400 0x400>;
};
timers11: timers@40014800 {
+ #address-cells = <1>;
#size-cells = <0>;
compatible = "st,stm32-timers";
reg = <0x40014800 0x400>;
reg = <0x40007000 0x400>;
};
- sdio: sdio@40012c00 {
- compatible = "st,stm32f4xx-sdio";
- reg = <0x40012c00 0x400>;
- clocks = <&rcc 0 171>;
- interrupts = <49>;
- status = "disabled";
- pinctrl-0 = <&sdio_pins>;
- pinctrl-1 = <&sdio_pins_od>;
- pinctrl-names = "default", "opendrain";
- max-frequency = <48000000>;
- };
-
ltdc: display-controller@40016800 {
compatible = "st,stm32-ltdc";
reg = <0x40016800 0x200>;
*/
/dts-v1/;
-#include "stm32f429.dtsi"
+#include "stm32f469.dtsi"
#include "stm32f469-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
model = "STMicroelectronics STM32F469i-DISCO board";
dma-ranges = <0xc0000000 0x0 0x10000000>;
};
+ leds {
+ compatible = "gpio-leds";
+ green {
+ gpios = <&gpiog 6 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+ orange {
+ gpios = <&gpiod 4 GPIO_ACTIVE_LOW>;
+ };
+ red {
+ gpios = <&gpiod 5 GPIO_ACTIVE_LOW>;
+ };
+ blue {
+ gpios = <&gpiok 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+ button@0 {
+ label = "User";
+ linux,code = <KEY_WAKEUP>;
+ gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
/* This turns on vbus for otg for host mode (dwc2) */
vcc5v_otg: vcc5v-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpiob 2 0>;
+ gpio = <&gpiob 2 GPIO_ACTIVE_HIGH>;
regulator-name = "vcc5_host1";
regulator-always-on;
};
clock-frequency = <8000000>;
};
+&dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi_in: endpoint {
+ remote-endpoint = <<dc_out_dsi>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi_out: endpoint {
+ remote-endpoint = <&dsi_panel_in>;
+ };
+ };
+ };
+
+ panel-dsi@0 {
+ compatible = "orisetech,otm8009a";
+ reg = <0>; /* dsi virtual channel (0..3) */
+ reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ port {
+ dsi_panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+};
+
+<dc {
+ dma-ranges;
+ status = "okay";
+
+ port {
+ ltdc_out_dsi: endpoint@0 {
+ remote-endpoint = <&dsi_in>;
+ };
+ };
+};
+
&rtc {
status = "okay";
};
&sdio {
status = "okay";
vmmc-supply = <&mmc_vcard>;
+ cd-gpios = <&gpiog 2 GPIO_ACTIVE_LOW>;
+ broken-cd;
pinctrl-names = "default", "opendrain";
pinctrl-0 = <&sdio_pins>;
pinctrl-1 = <&sdio_pins_od>;
/*
- * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
- * Author(s): Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/* Copyright (C) STMicroelectronics 2017 - All Rights Reserved */
+
+#include "stm32f429.dtsi"
+
+/ {
+ soc {
+ dsi: dsi@40016c00 {
+ compatible = "st,stm32-dsi";
+ reg = <0x40016c00 0x800>;
+ interrupts = <92>;
+ resets = <&rcc STM32F4_APB2_RESET(DSI)>;
+ reset-names = "apb";
+ clocks = <&rcc 1 CLK_F469_DSI>, <&clk_hse>;
+ clock-names = "pclk", "ref";
+ status = "disabled";
+ };
+ };
+};
#define CLK_SAI2 11
#define CLK_I2SQ_PDIV 12
#define CLK_SAIQ_PDIV 13
-
-#define END_PRIMARY_CLK 14
-
#define CLK_HSI 14
#define CLK_SYSCLK 15
+#define CLK_F469_DSI 16
+
+#define END_PRIMARY_CLK 17
+
#define CLK_HDMI_CEC 16
#define CLK_SPDIF 17
#define CLK_USART1 18
projects / u-boot.git / commitdiff