serial: npcm: Add support for Nuvoton NPCM SoCs

Add Nuvoton BMC NPCM7xx/NPCM8xx uart driver

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
Signed-off-by: Stanley Chu <yschu@nuvoton.com>

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 5dcf5c019da93a827f794e24714efad64cc46b5e..26fa498bbbb7e7ec527677c1b6f2b521f5554ec3 100644 (file)
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -1016,6 +1016,15 @@ config MPC8XX_CONS
        depends on MPC8xx
        default y
 
+config NPCM_SERIAL
+       bool "Nuvoton NPCM UART driver"
+       depends on DM_SERIAL
+       help
+         Select this to enable UART support for Nuvoton BMCs
+         (NPCM7xx and NPCM8xx).
+         The driver enables the onboard serial port with 8-N-1
+         configuration.
+
 config XEN_SERIAL
        bool "XEN serial support"
        depends on XEN

diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index d8e26d72ea2853560faa244bdbea69d3b7b96187..51de06a78c58107997a39cd72cfc7b2b39227c4e 100644 (file)
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -66,6 +66,7 @@ obj-$(CONFIG_MSM_GENI_SERIAL) += serial_msm_geni.o
 obj-$(CONFIG_MVEBU_A3700_UART) += serial_mvebu_a3700.o
 obj-$(CONFIG_MPC8XX_CONS) += serial_mpc8xx.o
 obj-$(CONFIG_NULLDEV_SERIAL) += serial_nulldev.o
+obj-$(CONFIG_NPCM_SERIAL) += serial_npcm.o
 obj-$(CONFIG_OCTEON_SERIAL_BOOTCMD) += serial_octeon_bootcmd.o
 obj-$(CONFIG_OCTEON_SERIAL_PCIE_CONSOLE) += serial_octeon_pcie_console.o
 obj-$(CONFIG_OWL_SERIAL) += serial_owl.o

diff --git a/drivers/serial/serial_npcm.c b/drivers/serial/serial_npcm.c
new file mode 100644 (file)
index 0000000..76ac7cb
--- /dev/null
+++ b/drivers/serial/serial_npcm.c
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021 Nuvoton Technology Corp.
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <serial.h>
+
+struct npcm_uart {
+       union {
+               u32     rbr;    /* Receive Buffer Register */
+               u32     thr;    /* Transmit Holding Register */
+               u32     dll;    /* Divisor Latch (Low Byte) Register */
+       };
+       union {
+               u32     ier;    /* Interrupt Enable Register */
+               u32     dlm;    /* Divisor Latch (Low Byte) Register */
+       };
+       union {
+               u32     iir;    /* Interrupt Identification Register */
+               u32     fcr;    /* FIFO Control Register */
+       };
+       u32     lcr;            /* Line Control Register */
+       u32     mcr;            /* Modem Control Register */
+       u32     lsr;            /* Line Status Control Register */
+       u32     msr;            /* Modem Status Register */
+       u32     tor;            /* Timeout Register */
+};
+
+#define        LCR_WLS_8BITS   3       /* 8-bit word length select */
+#define        FCR_TFR         BIT(2)  /* TxFIFO reset */
+#define        FCR_RFR         BIT(1)  /* RxFIFO reset */
+#define        FCR_FME         BIT(0)  /* FIFO mode enable */
+#define        LSR_THRE        BIT(5)  /* Status of TxFIFO empty */
+#define        LSR_RFDR        BIT(0)  /* Status of RxFIFO data ready */
+#define        LCR_DLAB        BIT(7)  /* Divisor latch access bit */
+
+struct npcm_serial_plat {
+       struct npcm_uart *reg;
+       u32 uart_clk;           /* frequency of uart clock source */
+};
+
+static int npcm_serial_pending(struct udevice *dev, bool input)
+{
+       struct npcm_serial_plat *plat = dev_get_plat(dev);
+       struct npcm_uart *uart = plat->reg;
+
+       if (input)
+               return readb(&uart->lsr) & LSR_RFDR ? 1 : 0;
+       else
+               return readb(&uart->lsr) & LSR_THRE ? 0 : 1;
+}
+
+static int npcm_serial_putc(struct udevice *dev, const char ch)
+{
+       struct npcm_serial_plat *plat = dev_get_plat(dev);
+       struct npcm_uart *uart = plat->reg;
+
+       if (!(readb(&uart->lsr) & LSR_THRE))
+               return -EAGAIN;
+
+       writeb(ch, &uart->thr);
+
+       return 0;
+}
+
+static int npcm_serial_getc(struct udevice *dev)
+{
+       struct npcm_serial_plat *plat = dev_get_plat(dev);
+       struct npcm_uart *uart = plat->reg;
+
+       if (!(readb(&uart->lsr) & LSR_RFDR))
+               return -EAGAIN;
+
+       return readb(&uart->rbr);
+}
+
+static int npcm_serial_setbrg(struct udevice *dev, int baudrate)
+{
+       struct npcm_serial_plat *plat = dev_get_plat(dev);
+       struct npcm_uart *uart = plat->reg;
+       u16 divisor;
+
+       /* BaudOut = UART Clock / (16 * [Divisor + 2]) */
+       divisor = DIV_ROUND_CLOSEST(plat->uart_clk, 16 * baudrate + 2) - 2;
+
+       setbits_8(&uart->lcr, LCR_DLAB);
+       writeb(divisor & 0xff, &uart->dll);
+       writeb(divisor >> 8, &uart->dlm);
+       clrbits_8(&uart->lcr, LCR_DLAB);
+
+       return 0;
+}
+
+static int npcm_serial_probe(struct udevice *dev)
+{
+       struct npcm_serial_plat *plat = dev_get_plat(dev);
+       struct npcm_uart *uart = plat->reg;
+       struct clk clk, parent;
+       u32 freq;
+       int ret;
+
+       plat->reg = dev_read_addr_ptr(dev);
+       freq = dev_read_u32_default(dev, "clock-frequency", 0);
+
+       ret = clk_get_by_index(dev, 0, &clk);
+       if (ret < 0)
+               return ret;
+
+       ret = clk_get_by_index(dev, 1, &parent);
+       if (!ret) {
+               ret = clk_set_parent(&clk, &parent);
+               if (ret)
+                       return ret;
+       }
+
+       ret = clk_set_rate(&clk, freq);
+       if (ret < 0)
+               return ret;
+       plat->uart_clk = ret;
+
+       /* Disable all interrupt */
+       writeb(0, &uart->ier);
+
+       /* Set 8 bit, 1 stop, no parity */
+       writeb(LCR_WLS_8BITS, &uart->lcr);
+
+       /* Reset RX/TX FIFO */
+       writeb(FCR_FME | FCR_RFR | FCR_TFR, &uart->fcr);
+
+       return 0;
+}
+
+static const struct dm_serial_ops npcm_serial_ops = {
+       .getc = npcm_serial_getc,
+       .setbrg = npcm_serial_setbrg,
+       .putc = npcm_serial_putc,
+       .pending = npcm_serial_pending,
+};
+
+static const struct udevice_id npcm_serial_ids[] = {
+       { .compatible = "nuvoton,npcm750-uart" },
+       { .compatible = "nuvoton,npcm845-uart" },
+       { }
+};
+
+U_BOOT_DRIVER(serial_npcm) = {
+       .name   = "serial_npcm",
+       .id     = UCLASS_SERIAL,
+       .of_match = npcm_serial_ids,
+       .plat_auto  = sizeof(struct npcm_serial_plat),
+       .probe = npcm_serial_probe,
+       .ops    = &npcm_serial_ops,
+       .flags = DM_FLAG_PRE_RELOC,
+};