M52277EVB mcf5227x
M5235EVB mcf52x2
+ M5253DEMO mcf52x2
M5329EVB mcf532x
M5373EVB mcf532x
M54455EVB mcf5445x
M52277EVB \
M5235EVB \
M5249EVB \
+ M5253DEMO \
M5253EVBE \
M5271EVB \
M5272C3 \
M5249EVB_config : unconfig
@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale
+M5253DEMO_config : unconfig
+ @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253demo freescale
+
M5253EVBE_config : unconfig
@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253evbe freescale
--- /dev/null
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS = $(BOARD).o flash.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0xFF800000
--- /dev/null
+/*
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#include <asm/immap.h>
+
+#ifndef CFG_FLASH_CFI
+typedef unsigned short FLASH_PORT_WIDTH;
+typedef volatile unsigned short FLASH_PORT_WIDTHV;
+
+#define FPW FLASH_PORT_WIDTH
+#define FPWV FLASH_PORT_WIDTHV
+
+#define FLASH_CYCLE1 0x5555
+#define FLASH_CYCLE2 0x2aaa
+
+#define SYNC __asm__("nop")
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+
+ulong flash_get_size(FPWV * addr, flash_info_t * info);
+int flash_get_offsets(ulong base, flash_info_t * info);
+int write_word(flash_info_t * info, FPWV * dest, u16 data);
+void inline spin_wheel(void);
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+ulong flash_init(void)
+{
+ ulong size = 0;
+ ulong fbase = 0;
+
+ fbase = (ulong) CFG_FLASH_BASE;
+ flash_get_size((FPWV *) fbase, &flash_info[0]);
+ flash_get_offsets((ulong) fbase, &flash_info[0]);
+ fbase += flash_info[0].size;
+ size += flash_info[0].size;
+
+ /* Protect monitor and environment sectors */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]);
+
+ return size;
+}
+
+int flash_get_offsets(ulong base, flash_info_t * info)
+{
+ int j, k;
+
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
+
+ info->start[0] = base;
+ for (k = 0, j = 0; j < CFG_SST_SECT; j++, k++) {
+ info->start[k + 1] = info->start[k] + CFG_SST_SECTSZ;
+ info->protect[k] = 0;
+ }
+ }
+
+ return ERR_OK;
+}
+
+void flash_print_info(flash_info_t * info)
+{
+ int i;
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_SST:
+ printf("SST ");
+ break;
+ default:
+ printf("Unknown Vendor ");
+ break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_SST6401B:
+ printf("SST39VF6401B\n");
+ break;
+ default:
+ printf("Unknown Chip Type\n");
+ return;
+ }
+
+ if (info->size > 0x100000) {
+ int remainder;
+
+ printf(" Size: %ld", info->size >> 20);
+
+ remainder = (info->size % 0x100000);
+ if (remainder) {
+ remainder >>= 10;
+ remainder = (int)((float)
+ (((float)remainder / (float)1024) *
+ 10000));
+ printf(".%d ", remainder);
+ }
+
+ printf("MB in %d Sectors\n", info->sector_count);
+ } else
+ printf(" Size: %ld KB in %d Sectors\n",
+ info->size >> 10, info->sector_count);
+
+ printf(" Sector Start Addresses:");
+ for (i = 0; i < info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf("\n ");
+ printf(" %08lX%s",
+ info->start[i], info->protect[i] ? " (RO)" : " ");
+ }
+ printf("\n");
+}
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+ulong flash_get_size(FPWV * addr, flash_info_t * info)
+{
+ u16 value;
+
+ addr[FLASH_CYCLE1] = (FPWV) 0x00AA00AA; /* for Atmel, Intel ignores this */
+ addr[FLASH_CYCLE2] = (FPWV) 0x00550055; /* for Atmel, Intel ignores this */
+ addr[FLASH_CYCLE1] = (FPWV) 0x00900090; /* selects Intel or Atmel */
+
+ switch (addr[0] & 0xffff) {
+ case (u8) SST_MANUFACT:
+ info->flash_id = FLASH_MAN_SST;
+ value = addr[1];
+ break;
+ default:
+ printf("Unknown Flash\n");
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+
+ *addr = (FPW) 0x00F000F0;
+ return (0); /* no or unknown flash */
+ }
+
+ switch (value) {
+ case (u16) SST_ID_xF6401B:
+ info->flash_id += FLASH_SST6401B;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ break;
+ }
+
+ info->sector_count = 0;
+ info->size = 0;
+ info->sector_count = CFG_SST_SECT;
+ info->size = CFG_SST_SECT * CFG_SST_SECTSZ;
+
+ /* reset ID mode */
+ *addr = (FPWV) 0x00F000F0;
+
+ if (info->sector_count > CFG_MAX_FLASH_SECT) {
+ printf("** ERROR: sector count %d > max (%d) **\n",
+ info->sector_count, CFG_MAX_FLASH_SECT);
+ info->sector_count = CFG_MAX_FLASH_SECT;
+ }
+
+ return (info->size);
+}
+
+int flash_erase(flash_info_t * info, int s_first, int s_last)
+{
+ FPWV *addr;
+ int flag, prot, sect, count;
+ ulong type, start, last;
+ int rcode = 0, flashtype = 0;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN)
+ printf("- missing\n");
+ else
+ printf("- no sectors to erase\n");
+ return 1;
+ }
+
+ type = (info->flash_id & FLASH_VENDMASK);
+
+ switch (type) {
+ case FLASH_MAN_SST:
+ flashtype = 1;
+ break;
+ default:
+ type = (info->flash_id & FLASH_VENDMASK);
+ printf("Can't erase unknown flash type %08lx - aborted\n",
+ info->flash_id);
+ return 1;
+ }
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot)
+ printf("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ else
+ printf("\n");
+
+ flag = disable_interrupts();
+
+ start = get_timer(0);
+ last = start;
+
+ if ((s_last - s_first) == (CFG_SST_SECT - 1)) {
+ if (prot == 0) {
+ addr = (FPWV *) info->start[0];
+
+ addr[FLASH_CYCLE1] = 0x00AA; /* unlock */
+ addr[FLASH_CYCLE2] = 0x0055; /* unlock */
+ addr[FLASH_CYCLE1] = 0x0080; /* erase mode */
+ addr[FLASH_CYCLE1] = 0x00AA; /* unlock */
+ addr[FLASH_CYCLE2] = 0x0055; /* unlock */
+ *addr = 0x0030; /* erase chip */
+
+ count = 0;
+ start = get_timer(0);
+
+ while ((*addr & 0x0080) != 0x0080) {
+ if (count++ > 0x10000) {
+ spin_wheel();
+ count = 0;
+ }
+
+ if (get_timer(start) > CFG_FLASH_ERASE_TOUT) {
+ printf("Timeout\n");
+ *addr = 0x00F0; /* reset to read mode */
+
+ return 1;
+ }
+ }
+
+ *addr = 0x00F0; /* reset to read mode */
+
+ printf("\b. done\n");
+
+ if (flag)
+ enable_interrupts();
+
+ return 0;
+ } else if (prot == CFG_SST_SECT) {
+ return 1;
+ }
+ }
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+
+ addr = (FPWV *) (info->start[sect]);
+
+ printf(".");
+
+ /* arm simple, non interrupt dependent timer */
+ start = get_timer(0);
+
+ switch (flashtype) {
+ case 1:
+ {
+ FPWV *base; /* first address in bank */
+
+ flag = disable_interrupts();
+
+ base = (FPWV *) (CFG_FLASH_BASE); /* First sector */
+
+ base[FLASH_CYCLE1] = 0x00AA; /* unlock */
+ base[FLASH_CYCLE2] = 0x0055; /* unlock */
+ base[FLASH_CYCLE1] = 0x0080; /* erase mode */
+ base[FLASH_CYCLE1] = 0x00AA; /* unlock */
+ base[FLASH_CYCLE2] = 0x0055; /* unlock */
+ *addr = 0x0050; /* erase sector */
+
+ if (flag)
+ enable_interrupts();
+
+ while ((*addr & 0x0080) != 0x0080) {
+ if (get_timer(start) >
+ CFG_FLASH_ERASE_TOUT) {
+ printf("Timeout\n");
+ *addr = 0x00F0; /* reset to read mode */
+
+ rcode = 1;
+ break;
+ }
+ }
+
+ *addr = 0x00F0; /* reset to read mode */
+ break;
+ }
+ } /* switch (flashtype) */
+ }
+ }
+ printf(" done\n");
+
+ if (flag)
+ enable_interrupts();
+
+ return rcode;
+}
+
+int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+ ulong wp, count;
+ u16 data;
+ int rc, port_width;
+
+ if (info->flash_id == FLASH_UNKNOWN)
+ return 4;
+
+ /* get lower word aligned address */
+ wp = addr;
+ port_width = sizeof(FPW);
+
+ /* handle unaligned start bytes */
+ if (wp & 1) {
+ data = *((FPWV *) wp);
+ data = (data << 8) | *src;
+
+ if ((rc = write_word(info, (FPWV *) wp, data)) != 0)
+ return (rc);
+
+ wp++;
+ cnt -= 1;
+ src++;
+ }
+
+ while (cnt >= 2) {
+ /*
+ * handle word aligned part
+ */
+ count = 0;
+ data = *((FPWV *) src);
+
+ if ((rc = write_word(info, (FPWV *) wp, data)) != 0)
+ return (rc);
+
+ wp += 2;
+ src += 2;
+ cnt -= 2;
+
+ if (count++ > 0x800) {
+ spin_wheel();
+ count = 0;
+ }
+ }
+ /* handle word aligned part */
+ if (cnt) {
+ /* handle word aligned part */
+ count = 0;
+ data = *((FPWV *) wp);
+
+ data = (data & 0x00FF) | (*src << 8);
+
+ if ((rc = write_word(info, (FPWV *) wp, data)) != 0)
+ return (rc);
+
+ wp++;
+ src++;
+ cnt -= 1;
+ if (count++ > 0x800) {
+ spin_wheel();
+ count = 0;
+ }
+ }
+
+ if (cnt == 0)
+ return ERR_OK;
+
+ return ERR_OK;
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash
+ * A word is 16 bits, whichever the bus width of the flash bank
+ * (not an individual chip) is.
+ *
+ * returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+int write_word(flash_info_t * info, FPWV * dest, u16 data)
+{
+ ulong start;
+ int flag;
+ int res = 0; /* result, assume success */
+ FPWV *base; /* first address in flash bank */
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*dest & (u8) data) != (u8) data) {
+ return (2);
+ }
+
+ base = (FPWV *) (CFG_FLASH_BASE);
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ base[FLASH_CYCLE1] = (u8) 0x00AA00AA; /* unlock */
+ base[FLASH_CYCLE2] = (u8) 0x00550055; /* unlock */
+ base[FLASH_CYCLE1] = (u8) 0x00A000A0; /* selects program mode */
+
+ *dest = data; /* start programming the data */
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ start = get_timer(0);
+
+ /* data polling for D7 */
+ while (res == 0
+ && (*dest & (u8) 0x00800080) != (data & (u8) 0x00800080)) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ *dest = (u8) 0x00F000F0; /* reset bank */
+ res = 1;
+ }
+ }
+
+ *dest++ = (u8) 0x00F000F0; /* reset bank */
+
+ return (res);
+}
+
+void inline spin_wheel(void)
+{
+ static int p = 0;
+ static char w[] = "\\/-";
+
+ printf("\010%c", w[p]);
+ (++p == 3) ? (p = 0) : 0;
+}
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * Hayden Fraser (Hayden.Fraser@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/immap.h>
+
+int checkboard(void)
+{
+ puts("Board: ");
+ puts("Freescale MCF5253 DEMO\n");
+ return 0;
+};
+
+phys_size_t initdram(int board_type)
+{
+ u32 dramsize = 0;
+
+ /*
+ * Check to see if the SDRAM has already been initialized
+ * by a run control tool
+ */
+ if (!(mbar_readLong(MCFSIM_DCR) & 0x8000)) {
+ u32 RC, temp;
+
+ RC = (CFG_CLK / 1000000) >> 1;
+ RC = (RC * 15) >> 4;
+
+ /* Initialize DRAM Control Register: DCR */
+ mbar_writeShort(MCFSIM_DCR, (0x8400 | RC));
+ __asm__("nop");
+
+ mbar_writeLong(MCFSIM_DACR0, 0x00003224);
+ __asm__("nop");
+
+ /* Initialize DMR0 */
+ dramsize = (CFG_SDRAM_SIZE << 20);
+ temp = (dramsize - 1) & 0xFFFC0000;
+ mbar_writeLong(MCFSIM_DMR0, temp | 1);
+ __asm__("nop");
+
+ mbar_writeLong(MCFSIM_DACR0, 0x0000322c);
+ __asm__("nop");
+
+ /* Write to this block to initiate precharge */
+ *(u32 *) (CFG_SDRAM_BASE) = 0xa5a5a5a5;
+ __asm__("nop");
+
+ /* Set RE bit in DACR */
+ mbar_writeLong(MCFSIM_DACR0,
+ mbar_readLong(MCFSIM_DACR0) | 0x8000);
+ __asm__("nop");
+
+ /* Wait for at least 8 auto refresh cycles to occur */
+ udelay(500);
+
+ /* Finish the configuration by issuing the MRS */
+ mbar_writeLong(MCFSIM_DACR0,
+ mbar_readLong(MCFSIM_DACR0) | 0x0040);
+ __asm__("nop");
+
+ *(u32 *) (CFG_SDRAM_BASE + 0x800) = 0xa5a5a5a5;
+ }
+
+ return dramsize;
+}
+
+int testdram(void)
+{
+ /* TODO: XXX XXX XXX */
+ printf("DRAM test not implemented!\n");
+
+ return (0);
+}
+
+#ifdef CONFIG_CMD_IDE
+#include <ata.h>
+int ide_preinit(void)
+{
+ return (0);
+}
+
+void ide_set_reset(int idereset)
+{
+ volatile atac_t *ata = (atac_t *) CFG_ATA_BASE_ADDR;
+ long period;
+ /* t1, t2, t3, t4, t5, t6, t9, tRD, tA */
+ int piotms[5][9] = { {70, 165, 60, 30, 50, 5, 20, 0, 35}, /* PIO 0 */
+ {50, 125, 45, 20, 35, 5, 15, 0, 35}, /* PIO 1 */
+ {30, 100, 30, 15, 20, 5, 10, 0, 35}, /* PIO 2 */
+ {30, 80, 30, 10, 20, 5, 10, 0, 35}, /* PIO 3 */
+ {25, 70, 20, 10, 20, 5, 10, 0, 35} /* PIO 4 */
+ };
+
+ if (idereset) {
+ ata->cr = 0; /* control reset */
+ udelay(100);
+ } else {
+ mbar2_writeLong(CIM_MISCCR, CIM_MISCCR_CPUEND);
+
+#define CALC_TIMING(t) (t + period - 1) / period
+ period = 1000000000 / (CFG_CLK / 2); /* period in ns */
+
+ /*ata->ton = CALC_TIMING (180); */
+ ata->t1 = CALC_TIMING(piotms[2][0]);
+ ata->t2w = CALC_TIMING(piotms[2][1]);
+ ata->t2r = CALC_TIMING(piotms[2][1]);
+ ata->ta = CALC_TIMING(piotms[2][8]);
+ ata->trd = CALC_TIMING(piotms[2][7]);
+ ata->t4 = CALC_TIMING(piotms[2][3]);
+ ata->t9 = CALC_TIMING(piotms[2][6]);
+
+ ata->cr = 0x40; /* IORDY enable */
+ udelay(2000);
+ ata->cr |= 0x01; /* IORDY enable */
+ }
+}
+#endif /* CONFIG_CMD_IDE */
--- /dev/null
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(m68k)
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/mcf52x2/start.o (.text)
+ lib_m68k/traps.o (.text)
+ cpu/mcf52x2/interrupts.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/zlib.o (.text)
+
+ . = DEFINED(env_offset) ? env_offset : .;
+ common/environment.o (.text)
+
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+
+ .reloc :
+ {
+ __got_start = .;
+ *(.got)
+ __got_end = .;
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ _sbss = .;
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ _ebss = .;
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
--- /dev/null
+/*
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * Hayden Fraser (Hayden.Fraser@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _M5253DEMO_H
+#define _M5253DEMO_H
+
+#define CONFIG_MCF52x2 /* define processor family */
+#define CONFIG_M5253 /* define processor type */
+#define CONFIG_M5253DEMO /* define board type */
+
+#define CONFIG_MCFTMR
+
+#define CONFIG_MCFUART
+#define CFG_UART_PORT (0)
+#define CONFIG_BAUDRATE 115200
+#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
+
+#undef CONFIG_WATCHDOG /* disable watchdog */
+
+#define CONFIG_BOOTDELAY 5
+
+/* Configuration for environment
+ * Environment is embedded in u-boot in the second sector of the flash
+ */
+#ifdef CONFIG_MONITOR_IS_IN_RAM
+# define CFG_ENV_OFFSET 0x4000
+# define CFG_ENV_SECT_SIZE 0x1000
+# define CFG_ENV_IS_IN_FLASH 1
+#else
+# define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x4000)
+# define CFG_ENV_SECT_SIZE 0x1000
+# define CFG_ENV_IS_IN_FLASH 1
+#endif
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_PING
+
+#ifdef CONFIG_CMD_IDE
+/* ATA */
+# define CONFIG_DOS_PARTITION
+# define CONFIG_MAC_PARTITION
+# define CONFIG_IDE_RESET 1
+# define CONFIG_IDE_PREINIT 1
+# define CONFIG_ATAPI
+# undef CONFIG_LBA48
+
+# define CFG_IDE_MAXBUS 1
+# define CFG_IDE_MAXDEVICE 2
+
+# define CFG_ATA_BASE_ADDR (CFG_MBAR2 + 0x800)
+# define CFG_ATA_IDE0_OFFSET 0
+
+# define CFG_ATA_DATA_OFFSET 0xA0 /* Offset for data I/O */
+# define CFG_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */
+# define CFG_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */
+# define CFG_ATA_STRIDE 4 /* Interval between registers */
+# define _IO_BASE 0
+#endif
+
+#define CONFIG_DRIVER_DM9000
+#ifdef CONFIG_DRIVER_DM9000
+# define CONFIG_DM9000_BASE ((CFG_CSAR1 << 16) | 0x300)
+# define DM9000_IO CONFIG_DM9000_BASE
+# define DM9000_DATA (CONFIG_DM9000_BASE + 4)
+# undef CONFIG_DM9000_DEBUG
+
+# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60
+# define CONFIG_IPADDR 10.82.121.249
+# define CONFIG_NETMASK 255.255.252.0
+# define CONFIG_SERVERIP 10.82.120.80
+# define CONFIG_GATEWAYIP 10.82.123.254
+# define CONFIG_OVERWRITE_ETHADDR_ONCE
+
+# define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "inpclk=" MK_STR(CFG_INPUT_CLKSRC) "\0" \
+ "loadaddr=10000\0" \
+ "u-boot=u-boot.bin\0" \
+ "load=tftp ${loadaddr) ${u-boot}\0" \
+ "upd=run load; run prog\0" \
+ "prog=prot off 0 2ffff;" \
+ "era 0 2ffff;" \
+ "cp.b ${loadaddr} 0 ${filesize};" \
+ "save\0" \
+ ""
+#endif
+
+#define CONFIG_HOSTNAME M5253DEMO
+
+#define CFG_PROMPT "=> "
+#define CFG_LONGHELP /* undef to save memory */
+
+#if defined(CONFIG_CMD_KGDB)
+# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+# define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_LOAD_ADDR 0x00100000
+
+#define CFG_MEMTEST_START 0x400
+#define CFG_MEMTEST_END 0x380000
+
+#define CFG_HZ 1000
+
+#undef CFG_PLL_BYPASS /* bypass PLL for test purpose */
+#define CFG_FAST_CLK
+#ifdef CFG_FAST_CLK
+# define CFG_PLLCR 0x1243E054
+# define CFG_CLK 140000000
+#else
+# define CFG_PLLCR 0x135a4140
+# define CFG_CLK 70000000
+#endif
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+
+#define CFG_MBAR 0x10000000 /* Register Base Addrs */
+#define CFG_MBAR2 0x80000000 /* Module Base Addrs 2 */
+
+/*
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR 0x20000000
+#define CFG_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */
+
+#ifdef CONFIG_MONITOR_IS_IN_RAM
+# define CFG_MONITOR_BASE 0x20000
+#else
+# define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400)
+#endif
+
+#define CFG_MONITOR_LEN 0x40000
+#define CFG_MALLOC_LEN (256 << 10)
+#define CFG_BOOTPARAMS_LEN (64*1024)
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization ??
+ */
+#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
+
+/* FLASH organization */
+#define CFG_FLASH_BASE (CFG_CSAR0 << 16)
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 2048 /* max number of sectors on one chip */
+#define CFG_FLASH_ERASE_TOUT 1000
+
+#define FLASH_SST6401B 0x200
+#define SST_ID_xF6401B 0x236D236D
+
+#undef CFG_FLASH_CFI
+#ifdef CFG_FLASH_CFI
+/*
+ * Unable to use CFI driver, due to incompatible sector erase command by SST.
+ * Amd/Atmel use 0x30 for sector erase, SST use 0x50.
+ * 0x30 is block erase in SST
+ */
+# define CFG_FLASH_CFI_DRIVER 1
+# define CFG_FLASH_SIZE 0x800000
+# define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+# define CONFIG_FLASH_CFI_LEGACY
+#else
+# define CFG_SST_SECT 2048
+# define CFG_SST_SECTSZ 0x1000
+# define CFG_FLASH_WRITE_TOUT 500
+#endif
+
+/* Cache Configuration */
+#define CFG_CACHELINE_SIZE 16
+
+/* Port configuration */
+#define CFG_FECI2C 0xF0
+
+#define CFG_CSAR0 0xFF80
+#define CFG_CSMR0 0x007F0021
+#define CFG_CSCR0 0x1D80
+
+#define CFG_CSAR1 0xE000
+#define CFG_CSMR1 0x00000001
+#define CFG_CSCR1 0x3DD8
+
+#define CFG_CSAR2 0
+#define CFG_CSMR2 0
+#define CFG_CSCR2 0
+
+#define CFG_CSAR3 0
+#define CFG_CSMR3 0
+#define CFG_CSCR3 0
+
+/*-----------------------------------------------------------------------
+ * Port configuration
+ */
+#define CFG_GPIO_FUNC 0x00000008 /* Set gpio pins: none */
+#define CFG_GPIO1_FUNC 0x00df00f0 /* 36-39(SWITCH),48-52(FPGAs),54 */
+#define CFG_GPIO_EN 0x00000008 /* Set gpio output enable */
+#define CFG_GPIO1_EN 0x00c70000 /* Set gpio output enable */
+#define CFG_GPIO_OUT 0x00000008 /* Set outputs to default state */
+#define CFG_GPIO1_OUT 0x00c70000 /* Set outputs to default state */
+#define CFG_GPIO1_LED 0x00400000 /* user led */
+
+#endif /* _M5253DEMO_H */
projects / u-boot.git / commitdiff