};
};
+ ethernet0_rmii_pins_c: rmii-2 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH1_RMII_TXD0 */
+ <STM32_PINMUX('G', 14, AF11)>, /* ETH1_RMII_TXD1 */
+ <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */
+ <STM32_PINMUX('A', 1, AF11)>, /* ETH1_RMII_REF_CLK */
+ <STM32_PINMUX('A', 2, AF11)>, /* ETH1_MDIO */
+ <STM32_PINMUX('C', 1, AF11)>; /* ETH1_MDC */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RMII_RXD0 */
+ <STM32_PINMUX('C', 5, AF11)>, /* ETH1_RMII_RXD1 */
+ <STM32_PINMUX('A', 7, AF11)>; /* ETH1_RMII_CRS_DV */
+ bias-disable;
+ };
+ };
+
+ ethernet0_rmii_sleep_pins_c: rmii-sleep-2 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH1_RMII_TXD0 */
+ <STM32_PINMUX('G', 14, ANALOG)>, /* ETH1_RMII_TXD1 */
+ <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */
+ <STM32_PINMUX('A', 2, ANALOG)>, /* ETH1_MDIO */
+ <STM32_PINMUX('C', 1, ANALOG)>, /* ETH1_MDC */
+ <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RMII_RXD0 */
+ <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RMII_RXD1 */
+ <STM32_PINMUX('A', 1, ANALOG)>, /* ETH1_RMII_REF_CLK */
+ <STM32_PINMUX('A', 7, ANALOG)>; /* ETH1_RMII_CRS_DV */
+ };
+ };
+
fmc_pins_a: fmc-0 {
pins1 {
pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
};
};
+ mco2_pins_a: mco2-0 {
+ pins {
+ pinmux = <STM32_PINMUX('G', 2, AF1)>; /* MCO2 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+ };
+
+ mco2_sleep_pins_a: mco2-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('G', 2, ANALOG)>; /* MCO2 */
+ };
+ };
+
m_can1_pins_a: m-can1-0 {
pins1 {
pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
bias-disable;
};
};
+
+ spi1_pins_b: spi1-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('A', 5, AF5)>, /* SPI1_SCK */
+ <STM32_PINMUX('B', 5, AF5)>; /* SPI1_MOSI */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+
+ pins2 {
+ pinmux = <STM32_PINMUX('A', 6, AF5)>; /* SPI1_MISO */
+ bias-disable;
+ };
+ };
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2022 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/ {
+ firmware {
+ optee: optee {
+ compatible = "linaro,optee-tz";
+ method = "smc";
+ };
+
+ scmi: scmi {
+ compatible = "linaro,scmi-optee";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ linaro,optee-channel-id = <0>;
+ shmem = <&scmi_shm>;
+
+ scmi_clk: protocol@14 {
+ reg = <0x14>;
+ #clock-cells = <1>;
+ };
+
+ scmi_reset: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+
+ scmi_voltd: protocol@17 {
+ reg = <0x17>;
+
+ scmi_reguls: regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ scmi_reg11: reg11@0 {
+ reg = <0>;
+ regulator-name = "reg11";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ scmi_reg18: reg18@1 {
+ voltd-name = "reg18";
+ reg = <1>;
+ regulator-name = "reg18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ scmi_usb33: usb33@2 {
+ reg = <2>;
+ regulator-name = "usb33";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+ };
+ };
+ };
+
+ soc {
+ scmi_sram: sram@2ffff000 {
+ compatible = "mmio-sram";
+ reg = <0x2ffff000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x2ffff000 0x1000>;
+
+ scmi_shm: scmi-sram@0 {
+ compatible = "arm,scmi-shmem";
+ reg = <0 0x80>;
+ };
+ };
+ };
+};
+
+®11 {
+ status = "disabled";
+};
+
+®18 {
+ status = "disabled";
+};
+
+&usb33 {
+ status = "disabled";
+};
+
+&usbotg_hs {
+ usb33d-supply = <&scmi_usb33>;
+};
+
+&usbphyc {
+ vdda1v1-supply = <&scmi_reg11>;
+ vdda1v8-supply = <&scmi_reg18>;
+};
+
+/delete-node/ &clk_hse;
+/delete-node/ &clk_hsi;
+/delete-node/ &clk_lse;
+/delete-node/ &clk_lsi;
+/delete-node/ &clk_csi;
+/delete-node/ ®11;
+/delete-node/ ®18;
+/delete-node/ &usb33;
+/delete-node/ &pwr_regulators;
compatible = "st,stm32-cec";
reg = <0x40016000 0x400>;
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc CEC_K>, <&clk_lse>;
+ clocks = <&rcc CEC_K>, <&rcc CEC>;
clock-names = "cec", "hdmi-cec";
status = "disabled";
};
usbh_ohci: usb@5800c000 {
compatible = "generic-ohci";
reg = <0x5800c000 0x1000>;
- clocks = <&rcc USBH>, <&usbphyc>;
+ clocks = <&usbphyc>, <&rcc USBH>;
resets = <&rcc USBH_R>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
usbh_ehci: usb@5800d000 {
compatible = "generic-ehci";
reg = <0x5800d000 0x1000>;
- clocks = <&rcc USBH>;
+ clocks = <&usbphyc>, <&rcc USBH>;
resets = <&rcc USBH_R>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
companion = <&usbh_ohci>;
* Break node order to solve dependency probe issue between
* pinctrl and exti.
*/
- pinctrl: pin-controller@50002000 {
+ pinctrl: pinctrl@50002000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stm32mp157-pinctrl";
};
};
- pinctrl_z: pin-controller-z@54004000 {
+ pinctrl_z: pinctrl@54004000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stm32mp157-z-pinctrl";
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2022 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157a-dk1.dts"
+#include "stm32mp15-scmi.dtsi"
+
+/ {
+ model = "STMicroelectronics STM32MP157A-DK1 SCMI Discovery Board";
+ compatible = "st,stm32mp157a-dk1-scmi", "st,stm32mp157a-dk1", "st,stm32mp157";
+
+ reserved-memory {
+ optee@de000000 {
+ reg = <0xde000000 0x2000000>;
+ no-map;
+ };
+ };
+};
+
+&cpu0 {
+ clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&cpu1 {
+ clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&dsi {
+ clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
+};
+
+&gpioz {
+ clocks = <&scmi_clk CK_SCMI_GPIOZ>;
+};
+
+&hash1 {
+ clocks = <&scmi_clk CK_SCMI_HASH1>;
+ resets = <&scmi_reset RST_SCMI_HASH1>;
+};
+
+&i2c4 {
+ clocks = <&scmi_clk CK_SCMI_I2C4>;
+ resets = <&scmi_reset RST_SCMI_I2C4>;
+};
+
+&iwdg2 {
+ clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>;
+};
+
+&mdma1 {
+ resets = <&scmi_reset RST_SCMI_MDMA>;
+};
+
+&mlahb {
+ resets = <&scmi_reset RST_SCMI_MCU>;
+};
+
+&rcc {
+ compatible = "st,stm32mp1-rcc-secure", "syscon";
+ clock-names = "hse", "hsi", "csi", "lse", "lsi";
+ clocks = <&scmi_clk CK_SCMI_HSE>,
+ <&scmi_clk CK_SCMI_HSI>,
+ <&scmi_clk CK_SCMI_CSI>,
+ <&scmi_clk CK_SCMI_LSE>,
+ <&scmi_clk CK_SCMI_LSI>;
+};
+
+&rng1 {
+ clocks = <&scmi_clk CK_SCMI_RNG1>;
+ resets = <&scmi_reset RST_SCMI_RNG1>;
+};
+
+&rtc {
+ clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2022 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157c-dk2.dts"
+#include "stm32mp15-scmi.dtsi"
+
+/ {
+ model = "STMicroelectronics STM32MP157C-DK2 SCMI Discovery Board";
+ compatible = "st,stm32mp157c-dk2-scmi", "st,stm32mp157c-dk2", "st,stm32mp157";
+
+ reserved-memory {
+ optee@de000000 {
+ reg = <0xde000000 0x2000000>;
+ no-map;
+ };
+ };
+};
+
+&cpu0 {
+ clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&cpu1 {
+ clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&cryp1 {
+ clocks = <&scmi_clk CK_SCMI_CRYP1>;
+ resets = <&scmi_reset RST_SCMI_CRYP1>;
+};
+
+&dsi {
+ phy-dsi-supply = <&scmi_reg18>;
+ clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
+};
+
+&gpioz {
+ clocks = <&scmi_clk CK_SCMI_GPIOZ>;
+};
+
+&hash1 {
+ clocks = <&scmi_clk CK_SCMI_HASH1>;
+ resets = <&scmi_reset RST_SCMI_HASH1>;
+};
+
+&i2c4 {
+ clocks = <&scmi_clk CK_SCMI_I2C4>;
+ resets = <&scmi_reset RST_SCMI_I2C4>;
+};
+
+&iwdg2 {
+ clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>;
+};
+
+&mdma1 {
+ resets = <&scmi_reset RST_SCMI_MDMA>;
+};
+
+&mlahb {
+ resets = <&scmi_reset RST_SCMI_MCU>;
+};
+
+&rcc {
+ compatible = "st,stm32mp1-rcc-secure", "syscon";
+ clock-names = "hse", "hsi", "csi", "lse", "lsi";
+ clocks = <&scmi_clk CK_SCMI_HSE>,
+ <&scmi_clk CK_SCMI_HSI>,
+ <&scmi_clk CK_SCMI_CSI>,
+ <&scmi_clk CK_SCMI_LSE>,
+ <&scmi_clk CK_SCMI_LSI>;
+};
+
+&rng1 {
+ clocks = <&scmi_clk CK_SCMI_RNG1>;
+ resets = <&scmi_reset RST_SCMI_RNG1>;
+};
+
+&rtc {
+ clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2022 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157c-ed1.dts"
+#include "stm32mp15-scmi.dtsi"
+
+/ {
+ model = "STMicroelectronics STM32MP157C-ED1 SCMI eval daughter";
+ compatible = "st,stm32mp157c-ed1-scmi", "st,stm32mp157c-ed1", "st,stm32mp157";
+
+ reserved-memory {
+ optee@fe000000 {
+ reg = <0xfe000000 0x2000000>;
+ no-map;
+ };
+ };
+};
+
+&cpu0 {
+ clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&cpu1 {
+ clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&cryp1 {
+ clocks = <&scmi_clk CK_SCMI_CRYP1>;
+ resets = <&scmi_reset RST_SCMI_CRYP1>;
+};
+
+&dsi {
+ clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
+};
+
+&gpioz {
+ clocks = <&scmi_clk CK_SCMI_GPIOZ>;
+};
+
+&hash1 {
+ clocks = <&scmi_clk CK_SCMI_HASH1>;
+ resets = <&scmi_reset RST_SCMI_HASH1>;
+};
+
+&i2c4 {
+ clocks = <&scmi_clk CK_SCMI_I2C4>;
+ resets = <&scmi_reset RST_SCMI_I2C4>;
+};
+
+&iwdg2 {
+ clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>;
+};
+
+&mdma1 {
+ resets = <&scmi_reset RST_SCMI_MDMA>;
+};
+
+&mlahb {
+ resets = <&scmi_reset RST_SCMI_MCU>;
+};
+
+&rcc {
+ compatible = "st,stm32mp1-rcc-secure", "syscon";
+ clock-names = "hse", "hsi", "csi", "lse", "lsi";
+ clocks = <&scmi_clk CK_SCMI_HSE>,
+ <&scmi_clk CK_SCMI_HSI>,
+ <&scmi_clk CK_SCMI_CSI>,
+ <&scmi_clk CK_SCMI_LSE>,
+ <&scmi_clk CK_SCMI_LSI>;
+};
+
+&rng1 {
+ clocks = <&scmi_clk CK_SCMI_RNG1>;
+ resets = <&scmi_reset RST_SCMI_RNG1>;
+};
+
+&rtc {
+ clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2022 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157c-ev1.dts"
+#include "stm32mp15-scmi.dtsi"
+
+/ {
+ model = "STMicroelectronics STM32MP157C-EV1 SCMI eval daughter on eval mother";
+ compatible = "st,stm32mp157c-ev1-scmi", "st,stm32mp157c-ev1", "st,stm32mp157c-ed1",
+ "st,stm32mp157";
+
+ reserved-memory {
+ optee@fe000000 {
+ reg = <0xfe000000 0x2000000>;
+ no-map;
+ };
+ };
+};
+
+&cpu0 {
+ clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&cpu1 {
+ clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&cryp1 {
+ clocks = <&scmi_clk CK_SCMI_CRYP1>;
+ resets = <&scmi_reset RST_SCMI_CRYP1>;
+};
+
+&dsi {
+ phy-dsi-supply = <&scmi_reg18>;
+ clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
+};
+
+&gpioz {
+ clocks = <&scmi_clk CK_SCMI_GPIOZ>;
+};
+
+&hash1 {
+ clocks = <&scmi_clk CK_SCMI_HASH1>;
+ resets = <&scmi_reset RST_SCMI_HASH1>;
+};
+
+&i2c4 {
+ clocks = <&scmi_clk CK_SCMI_I2C4>;
+ resets = <&scmi_reset RST_SCMI_I2C4>;
+};
+
+&iwdg2 {
+ clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>;
+};
+
+&m_can1 {
+ clocks = <&scmi_clk CK_SCMI_HSE>, <&rcc FDCAN_K>;
+};
+
+&mdma1 {
+ resets = <&scmi_reset RST_SCMI_MDMA>;
+};
+
+&mlahb {
+ resets = <&scmi_reset RST_SCMI_MCU>;
+};
+
+&rcc {
+ compatible = "st,stm32mp1-rcc-secure", "syscon";
+ clock-names = "hse", "hsi", "csi", "lse", "lsi";
+ clocks = <&scmi_clk CK_SCMI_HSE>,
+ <&scmi_clk CK_SCMI_HSI>,
+ <&scmi_clk CK_SCMI_CSI>,
+ <&scmi_clk CK_SCMI_LSE>,
+ <&scmi_clk CK_SCMI_LSI>;
+};
+
+&rng1 {
+ clocks = <&scmi_clk CK_SCMI_RNG1>;
+ resets = <&scmi_reset RST_SCMI_RNG1>;
+};
+
+&rtc {
+ clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
+};
#size-cells = <0>;
status = "okay";
- flash0: mx66l51235l@0 {
+ flash0: flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-rx-bus-width = <4>;
#size-cells = <1>;
};
- flash1: mx66l51235l@1 {
+ flash1: flash@1 {
compatible = "jedec,spi-nor";
reg = <1>;
spi-rx-bus-width = <4>;
*/
/*
- * List of clocks wich are not derived from system clock (SYSCLOCK)
+ * List of clocks which are not derived from system clock (SYSCLOCK)
*
* The index of these clocks is the secondary index of DT bindings
- * (see Documentatoin/devicetree/bindings/clock/st,stm32-rcc.txt)
+ * (see Documentation/devicetree/bindings/clock/st,stm32-rcc.txt)
*
* e.g:
<assigned-clocks = <&rcc 1 CLK_LSE>;
#define STM32MP1_LAST_CLK 232
+/* SCMI clock identifiers */
+#define CK_SCMI_HSE 0
+#define CK_SCMI_HSI 1
+#define CK_SCMI_CSI 2
+#define CK_SCMI_LSE 3
+#define CK_SCMI_LSI 4
+#define CK_SCMI_PLL2_Q 5
+#define CK_SCMI_PLL2_R 6
+#define CK_SCMI_MPU 7
+#define CK_SCMI_AXI 8
+#define CK_SCMI_BSEC 9
+#define CK_SCMI_CRYP1 10
+#define CK_SCMI_GPIOZ 11
+#define CK_SCMI_HASH1 12
+#define CK_SCMI_I2C4 13
+#define CK_SCMI_I2C6 14
+#define CK_SCMI_IWDG1 15
+#define CK_SCMI_RNG1 16
+#define CK_SCMI_RTC 17
+#define CK_SCMI_RTCAPB 18
+#define CK_SCMI_SPI6 19
+#define CK_SCMI_USART1 20
+
#endif /* _DT_BINDINGS_STM32MP1_CLKS_H_ */
#define STM32MP_PKG_AD 0x8
#endif /* _DT_BINDINGS_STM32_PINFUNC_H */
+
#define GPIOJ_R 19785
#define GPIOK_R 19786
+/* SCMI reset domain identifiers */
+#define RST_SCMI_SPI6 0
+#define RST_SCMI_I2C4 1
+#define RST_SCMI_I2C6 2
+#define RST_SCMI_USART1 3
+#define RST_SCMI_STGEN 4
+#define RST_SCMI_GPIOZ 5
+#define RST_SCMI_CRYP1 6
+#define RST_SCMI_HASH1 7
+#define RST_SCMI_RNG1 8
+#define RST_SCMI_MDMA 9
+#define RST_SCMI_MCU 10
+#define RST_SCMI_MCU_HOLD_BOOT 11
+
#endif /* _DT_BINDINGS_STM32MP1_RESET_H_ */
projects / u-boot.git / commitdiff