]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
phy: qcom: add Synopsys eUSB2 PHY driver
authorNeil Armstrong <neil.armstrong@linaro.org>
Wed, 10 Apr 2024 16:01:12 +0000 (18:01 +0200)
committerCaleb Connolly <caleb.connolly@linaro.org>
Tue, 23 Apr 2024 11:28:56 +0000 (13:28 +0200)
Add a driver for the new Synopsys eUSB2 PHY found in the SM8550
and SM8650 SoCs.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
drivers/phy/qcom/Kconfig
drivers/phy/qcom/Makefile
drivers/phy/qcom/phy-qcom-snps-eusb2.c [new file with mode: 0644]

index b9fe608c2798981ce08007e9bae4198dd81bff3d..3aae1813352be467ee16564114a079fa86f80bda 100644 (file)
@@ -27,6 +27,14 @@ config PHY_QCOM_USB_SNPS_FEMTO_V2
          High-Speed PHY driver. This driver supports the Hi-Speed PHY which
          is usually paired with Synopsys DWC3 USB IPs on MSM SOCs.
 
+config PHY_QCOM_SNPS_EUSB2
+       tristate "Qualcomm Synopsys eUSB2 High-Speed PHY"
+       depends on PHY && ARCH_SNAPDRAGON
+       help
+         Enable this to support the Qualcomm Synopsys DesignWare eUSB2
+         High-Speed PHY driver. This driver supports the Hi-Speed PHY which
+         is usually paired with Synopsys DWC3 USB IPs on MSM SOCs.
+
 config PHY_QCOM_USB_HS_28NM
        tristate "Qualcomm 28nm High-Speed PHY"
        depends on PHY && ARCH_SNAPDRAGON
index 5f4db4a537885184d91a7deb4e7ce2173901e699..a5153061dfbd03c68dfb954eaf71b91c05fe22f2 100644 (file)
@@ -2,5 +2,6 @@ obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o
 obj-$(CONFIG_MSM8916_USB_PHY) += msm8916-usbh-phy.o
 obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o
 obj-$(CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2) += phy-qcom-snps-femto-v2.o
+obj-$(CONFIG_PHY_QCOM_SNPS_EUSB2) += phy-qcom-snps-eusb2.o
 obj-$(CONFIG_PHY_QCOM_USB_HS_28NM) += phy-qcom-usb-hs-28nm.o
 obj-$(CONFIG_PHY_QCOM_USB_SS) += phy-qcom-usb-ss.o
diff --git a/drivers/phy/qcom/phy-qcom-snps-eusb2.c b/drivers/phy/qcom/phy-qcom-snps-eusb2.c
new file mode 100644 (file)
index 0000000..b2655ac
--- /dev/null
@@ -0,0 +1,366 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2023-2024, Linaro Limited
+ *
+ * Based on the Linux phy-qcom-snps-eusb2.c driver
+ */
+
+#include <clk.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <dm/device_compat.h>
+#include <dm/devres.h>
+#include <generic-phy.h>
+#include <malloc.h>
+#include <reset.h>
+
+#include <asm/io.h>
+#include <linux/bitops.h>
+#include <linux/bitfield.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+
+#define USB_PHY_UTMI_CTRL0             (0x3c)
+#define SLEEPM                         BIT(0)
+#define OPMODE_MASK                    GENMASK(4, 3)
+#define OPMODE_NONDRIVING              BIT(3)
+
+#define USB_PHY_UTMI_CTRL5             (0x50)
+#define POR                            BIT(1)
+
+#define USB_PHY_HS_PHY_CTRL_COMMON0    (0x54)
+#define PHY_ENABLE                     BIT(0)
+#define SIDDQ_SEL                      BIT(1)
+#define SIDDQ                          BIT(2)
+#define RETENABLEN                     BIT(3)
+#define FSEL_MASK                      GENMASK(6, 4)
+#define FSEL_19_2_MHZ_VAL              (0x0)
+#define FSEL_38_4_MHZ_VAL              (0x4)
+
+#define USB_PHY_CFG_CTRL_1             (0x58)
+#define PHY_CFG_PLL_CPBIAS_CNTRL_MASK  GENMASK(7, 1)
+
+#define USB_PHY_CFG_CTRL_2             (0x5c)
+#define PHY_CFG_PLL_FB_DIV_7_0_MASK    GENMASK(7, 0)
+#define DIV_7_0_19_2_MHZ_VAL           (0x90)
+#define DIV_7_0_38_4_MHZ_VAL           (0xc8)
+
+#define USB_PHY_CFG_CTRL_3             (0x60)
+#define PHY_CFG_PLL_FB_DIV_11_8_MASK   GENMASK(3, 0)
+#define DIV_11_8_19_2_MHZ_VAL          (0x1)
+#define DIV_11_8_38_4_MHZ_VAL          (0x0)
+
+#define PHY_CFG_PLL_REF_DIV            GENMASK(7, 4)
+#define PLL_REF_DIV_VAL                        (0x0)
+
+#define USB_PHY_HS_PHY_CTRL2           (0x64)
+#define VBUSVLDEXT0                    BIT(0)
+#define USB2_SUSPEND_N                 BIT(2)
+#define USB2_SUSPEND_N_SEL             BIT(3)
+#define VBUS_DET_EXT_SEL               BIT(4)
+
+#define USB_PHY_CFG_CTRL_4             (0x68)
+#define PHY_CFG_PLL_GMP_CNTRL_MASK     GENMASK(1, 0)
+#define PHY_CFG_PLL_INT_CNTRL_MASK     GENMASK(7, 2)
+
+#define USB_PHY_CFG_CTRL_5             (0x6c)
+#define PHY_CFG_PLL_PROP_CNTRL_MASK    GENMASK(4, 0)
+#define PHY_CFG_PLL_VREF_TUNE_MASK     GENMASK(7, 6)
+
+#define USB_PHY_CFG_CTRL_6             (0x70)
+#define PHY_CFG_PLL_VCO_CNTRL_MASK     GENMASK(2, 0)
+
+#define USB_PHY_CFG_CTRL_7             (0x74)
+
+#define USB_PHY_CFG_CTRL_8             (0x78)
+#define PHY_CFG_TX_FSLS_VREF_TUNE_MASK GENMASK(1, 0)
+#define PHY_CFG_TX_FSLS_VREG_BYPASS    BIT(2)
+#define PHY_CFG_TX_HS_VREF_TUNE_MASK   GENMASK(5, 3)
+#define PHY_CFG_TX_HS_XV_TUNE_MASK     GENMASK(7, 6)
+
+#define USB_PHY_CFG_CTRL_9             (0x7c)
+#define PHY_CFG_TX_PREEMP_TUNE_MASK    GENMASK(2, 0)
+#define PHY_CFG_TX_RES_TUNE_MASK       GENMASK(4, 3)
+#define PHY_CFG_TX_RISE_TUNE_MASK      GENMASK(6, 5)
+#define PHY_CFG_RCAL_BYPASS            BIT(7)
+
+#define USB_PHY_CFG_CTRL_10            (0x80)
+
+#define USB_PHY_CFG0                   (0x94)
+#define DATAPATH_CTRL_OVERRIDE_EN      BIT(0)
+#define CMN_CTRL_OVERRIDE_EN           BIT(1)
+
+#define UTMI_PHY_CMN_CTRL0             (0x98)
+#define TESTBURNIN                     BIT(6)
+
+#define USB_PHY_FSEL_SEL               (0xb8)
+#define FSEL_SEL                       BIT(0)
+
+#define USB_PHY_APB_ACCESS_CMD         (0x130)
+#define RW_ACCESS                      BIT(0)
+#define APB_START_CMD                  BIT(1)
+#define APB_LOGIC_RESET                        BIT(2)
+
+#define USB_PHY_APB_ACCESS_STATUS      (0x134)
+#define ACCESS_DONE                    BIT(0)
+#define TIMED_OUT                      BIT(1)
+#define ACCESS_ERROR                   BIT(2)
+#define ACCESS_IN_PROGRESS             BIT(3)
+
+#define USB_PHY_APB_ADDRESS            (0x138)
+#define APB_REG_ADDR_MASK              GENMASK(7, 0)
+
+#define USB_PHY_APB_WRDATA_LSB         (0x13c)
+#define APB_REG_WRDATA_7_0_MASK                GENMASK(3, 0)
+
+#define USB_PHY_APB_WRDATA_MSB         (0x140)
+#define APB_REG_WRDATA_15_8_MASK       GENMASK(7, 4)
+
+#define USB_PHY_APB_RDDATA_LSB         (0x144)
+#define APB_REG_RDDATA_7_0_MASK                GENMASK(3, 0)
+
+#define USB_PHY_APB_RDDATA_MSB         (0x148)
+#define APB_REG_RDDATA_15_8_MASK       GENMASK(7, 4)
+
+struct qcom_snps_eusb2_phy_priv {
+       void __iomem *base;
+       struct clk *ref_clk;
+       struct reset_ctl_bulk resets;
+};
+
+static void qcom_snps_eusb2_hsphy_write_mask(void __iomem *base, u32 offset,
+                                            u32 mask, u32 val)
+{
+       u32 reg;
+
+       reg = readl_relaxed(base + offset);
+       reg &= ~mask;
+       reg |= val & mask;
+       writel_relaxed(reg, base + offset);
+
+       /* Ensure above write is completed */
+       readl_relaxed(base + offset);
+}
+
+static void qcom_eusb2_default_parameters(struct qcom_snps_eusb2_phy_priv *qcom_snps_eusb2)
+{
+       /* default parameters: tx pre-emphasis */
+       qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_9,
+                                        PHY_CFG_TX_PREEMP_TUNE_MASK,
+                                        FIELD_PREP(PHY_CFG_TX_PREEMP_TUNE_MASK, 0));
+
+       /* tx rise/fall time */
+       qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_9,
+                                        PHY_CFG_TX_RISE_TUNE_MASK,
+                                        FIELD_PREP(PHY_CFG_TX_RISE_TUNE_MASK, 0x2));
+
+       /* source impedance adjustment */
+       qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_9,
+                                        PHY_CFG_TX_RES_TUNE_MASK,
+                                        FIELD_PREP(PHY_CFG_TX_RES_TUNE_MASK, 0x1));
+
+       /* dc voltage level adjustement */
+       qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_8,
+                                        PHY_CFG_TX_HS_VREF_TUNE_MASK,
+                                        FIELD_PREP(PHY_CFG_TX_HS_VREF_TUNE_MASK, 0x3));
+
+       /* transmitter HS crossover adjustement */
+       qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_8,
+                                        PHY_CFG_TX_HS_XV_TUNE_MASK,
+                                        FIELD_PREP(PHY_CFG_TX_HS_XV_TUNE_MASK, 0x0));
+}
+
+static int qcom_eusb2_ref_clk_init(struct qcom_snps_eusb2_phy_priv *qcom_snps_eusb2)
+{
+       unsigned long ref_clk_freq = clk_get_rate(qcom_snps_eusb2->ref_clk);
+
+       switch (ref_clk_freq) {
+       case 19200000:
+               qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_HS_PHY_CTRL_COMMON0,
+                                                FSEL_MASK,
+                                                FIELD_PREP(FSEL_MASK, FSEL_19_2_MHZ_VAL));
+
+               qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_2,
+                                                PHY_CFG_PLL_FB_DIV_7_0_MASK,
+                                                DIV_7_0_19_2_MHZ_VAL);
+
+               qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_3,
+                                                PHY_CFG_PLL_FB_DIV_11_8_MASK,
+                                                DIV_11_8_19_2_MHZ_VAL);
+               break;
+
+       case 38400000:
+               qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_HS_PHY_CTRL_COMMON0,
+                                                FSEL_MASK,
+                                                FIELD_PREP(FSEL_MASK, FSEL_38_4_MHZ_VAL));
+
+               qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_2,
+                                                PHY_CFG_PLL_FB_DIV_7_0_MASK,
+                                                DIV_7_0_38_4_MHZ_VAL);
+
+               qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_3,
+                                                PHY_CFG_PLL_FB_DIV_11_8_MASK,
+                                                DIV_11_8_38_4_MHZ_VAL);
+               break;
+
+       default:
+               printf("%s: unsupported ref_clk_freq:%lu\n", __func__, ref_clk_freq);
+               return -EINVAL;
+       }
+
+       qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_3,
+                                        PHY_CFG_PLL_REF_DIV, PLL_REF_DIV_VAL);
+
+       return 0;
+}
+
+static int qcom_snps_eusb2_usb_init(struct phy *phy)
+{
+       struct qcom_snps_eusb2_phy_priv *qcom_snps_eusb2 = dev_get_priv(phy->dev);
+       int ret;
+
+       qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG0,
+                                        CMN_CTRL_OVERRIDE_EN, CMN_CTRL_OVERRIDE_EN);
+
+       qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_UTMI_CTRL5, POR, POR);
+
+       qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_HS_PHY_CTRL_COMMON0,
+                                        PHY_ENABLE | RETENABLEN, PHY_ENABLE | RETENABLEN);
+
+       qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_APB_ACCESS_CMD,
+                                        APB_LOGIC_RESET, APB_LOGIC_RESET);
+
+       qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, UTMI_PHY_CMN_CTRL0, TESTBURNIN, 0);
+
+       qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_FSEL_SEL,
+                                        FSEL_SEL, FSEL_SEL);
+
+       /* update ref_clk related registers */
+       ret = qcom_eusb2_ref_clk_init(qcom_snps_eusb2);
+       if (ret)
+               return ret;
+
+       qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_1,
+                                        PHY_CFG_PLL_CPBIAS_CNTRL_MASK,
+                                        FIELD_PREP(PHY_CFG_PLL_CPBIAS_CNTRL_MASK, 0x1));
+
+       qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_4,
+                                        PHY_CFG_PLL_INT_CNTRL_MASK,
+                                        FIELD_PREP(PHY_CFG_PLL_INT_CNTRL_MASK, 0x8));
+
+       qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_4,
+                                        PHY_CFG_PLL_GMP_CNTRL_MASK,
+                                        FIELD_PREP(PHY_CFG_PLL_GMP_CNTRL_MASK, 0x1));
+
+       qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_5,
+                                        PHY_CFG_PLL_PROP_CNTRL_MASK,
+                                        FIELD_PREP(PHY_CFG_PLL_PROP_CNTRL_MASK, 0x10));
+
+       qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_6,
+                                        PHY_CFG_PLL_VCO_CNTRL_MASK,
+                                        FIELD_PREP(PHY_CFG_PLL_VCO_CNTRL_MASK, 0x0));
+
+       qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_5,
+                                        PHY_CFG_PLL_VREF_TUNE_MASK,
+                                        FIELD_PREP(PHY_CFG_PLL_VREF_TUNE_MASK, 0x1));
+
+       qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_HS_PHY_CTRL2,
+                                        VBUS_DET_EXT_SEL, VBUS_DET_EXT_SEL);
+
+       /* set default parameters */
+       qcom_eusb2_default_parameters(qcom_snps_eusb2);
+
+       qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_HS_PHY_CTRL2,
+                                        USB2_SUSPEND_N_SEL | USB2_SUSPEND_N,
+                                        USB2_SUSPEND_N_SEL | USB2_SUSPEND_N);
+
+       qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_UTMI_CTRL0, SLEEPM, SLEEPM);
+
+       qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_HS_PHY_CTRL_COMMON0,
+                                        SIDDQ_SEL, SIDDQ_SEL);
+
+       qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_HS_PHY_CTRL_COMMON0,
+                                        SIDDQ, 0);
+
+       qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_UTMI_CTRL5, POR, 0);
+
+       qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_HS_PHY_CTRL2,
+                                        USB2_SUSPEND_N_SEL, 0);
+
+       return 0;
+}
+
+static int qcom_snps_eusb2_phy_power_on(struct phy *phy)
+{
+       struct qcom_snps_eusb2_phy_priv *qcom_snps_eusb2 = dev_get_priv(phy->dev);
+       int ret;
+
+       /* TODO Repeater */
+
+       clk_prepare_enable(qcom_snps_eusb2->ref_clk);
+
+       ret = reset_deassert_bulk(&qcom_snps_eusb2->resets);
+       if (ret)
+               return ret;
+
+       ret = qcom_snps_eusb2_usb_init(phy);
+       if (ret)
+               return ret;
+
+       return 0;
+}
+
+static int qcom_snps_eusb2_phy_power_off(struct phy *phy)
+{
+       struct qcom_snps_eusb2_phy_priv *qcom_snps_eusb2 = dev_get_priv(phy->dev);
+
+       reset_assert_bulk(&qcom_snps_eusb2->resets);
+       clk_disable_unprepare(qcom_snps_eusb2->ref_clk);
+
+       return 0;
+}
+
+static int qcom_snps_eusb2_phy_probe(struct udevice *dev)
+{
+       struct qcom_snps_eusb2_phy_priv *qcom_snps_eusb2 = dev_get_priv(dev);
+       int ret;
+
+       qcom_snps_eusb2->base = (void __iomem *)dev_read_addr(dev);
+       if (IS_ERR(qcom_snps_eusb2->base))
+               return PTR_ERR(qcom_snps_eusb2->base);
+
+       qcom_snps_eusb2->ref_clk = devm_clk_get(dev, "ref");
+       if (IS_ERR(qcom_snps_eusb2->ref_clk)) {
+               printf("%s: failed to get ref clk %d\n", __func__, ret);
+               return PTR_ERR(qcom_snps_eusb2->ref_clk);
+       }
+
+       ret = reset_get_bulk(dev, &qcom_snps_eusb2->resets);
+       if (ret < 0) {
+               printf("failed to get resets, ret = %d\n", ret);
+               return ret;
+       }
+
+       return 0;
+}
+
+static struct phy_ops qcom_snps_eusb2_phy_ops = {
+       .power_on = qcom_snps_eusb2_phy_power_on,
+       .power_off = qcom_snps_eusb2_phy_power_off,
+};
+
+static const struct udevice_id qcom_snps_eusb2_phy_ids[] = {
+       {
+               .compatible = "qcom,sm8550-snps-eusb2-phy",
+       },
+       {}
+};
+
+U_BOOT_DRIVER(qcom_usb_qcom_snps_eusb2) = {
+       .name = "qcom-snps-eusb2-hsphy",
+       .id = UCLASS_PHY,
+       .of_match = qcom_snps_eusb2_phy_ids,
+       .ops = &qcom_snps_eusb2_phy_ops,
+       .probe = qcom_snps_eusb2_phy_probe,
+       .priv_auto = sizeof(struct qcom_snps_eusb2_phy_priv),
+};