- CONFIG_SYS_I2C_SH_SPEED5 for for the speed channel 5
- CONFIF_SYS_I2C_SH_NUM_CONTROLLERS for nummber of i2c buses
+ - drivers/i2c/omap24xx_i2c.c
+ - activate this driver with CONFIG_SYS_I2C_OMAP24XX
+ - CONFIG_SYS_OMAP24_I2C_SPEED speed channel 0
+ - CONFIG_SYS_OMAP24_I2C_SLAVE slave addr channel 0
+ - CONFIG_SYS_OMAP24_I2C_SPEED1 speed channel 1
+ - CONFIG_SYS_OMAP24_I2C_SLAVE1 slave addr channel 1
+ - CONFIG_SYS_OMAP24_I2C_SPEED2 speed channel 2
+ - CONFIG_SYS_OMAP24_I2C_SLAVE2 slave addr channel 2
+ - CONFIG_SYS_OMAP24_I2C_SPEED3 speed channel 3
+ - CONFIG_SYS_OMAP24_I2C_SLAVE3 slave addr channel 3
+ - CONFIG_SYS_OMAP24_I2C_SPEED4 speed channel 4
+ - CONFIG_SYS_OMAP24_I2C_SLAVE4 slave addr channel 4
+
additional defines:
CONFIG_SYS_NUM_I2C_BUSES
static int gpi2c = 1;
if (gpi2c) {
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+ i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED,
+ CONFIG_SYS_OMAP24_I2C_SLAVE);
gpi2c = 0;
}
}
. = ALIGN(4);
.data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
+ . = ALIGN(4);
+ .u_boot_list : {
+ KEEP(*(SORT(.u_boot_list*)));
+ } >.sram
. = ALIGN(4);
__image_copy_end = .;
_end = .;
gpmc_init();
#endif
#ifdef CONFIG_SPL_I2C_SUPPORT
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+ i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
#endif
}
#endif /* CONFIG_SPL_BUILD */
sr32(&prcm_base->iclken_per, 17, 1, 1);
#endif
-#ifdef CONFIG_DRIVER_OMAP34XX_I2C
+#ifdef CONFIG_SYS_I2C_OMAP34XX
/* Turn on all 3 I2C clocks */
sr32(&prcm_base->fclken1_core, 15, 3, 0x7);
sr32(&prcm_base->iclken1_core, 15, 3, 0x7); /* I2C1,2,3 = on */
*
* SPDX-License-Identifier: GPL-2.0+
*/
-#ifndef _I2C_H_
-#define _I2C_H_
+#ifndef _I2C_AM33XX_H_
+#define _I2C_AM33XX_H_
#define I2C_BASE1 0x44E0B000
#define I2C_BASE2 0x4802A000
#define I2C_IP_CLK 48000000
#define I2C_INTERNAL_SAMPLING_CLK 12000000
-#endif /* _I2C_H_ */
+#endif /* _I2C_AM33XX_H_ */
&ctrl_base->gpmc_nadv_ale);
}
-#ifdef CONFIG_DRIVER_OMAP34XX_I2C
+#ifdef CONFIG_SYS_I2C_OMAP34XX
/*
* Routine: reset_net_chip
* Description: reset the Ethernet controller via TPS65930 GPIO
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_DRIVER_OMAP34XX_I2C) += eeprom.o
+obj-$(CONFIG_SYS_I2C_OMAP34XX) += eeprom.o
obj-$(CONFIG_LCD) += omap3_display.o
#ifndef _EEPROM_
#define _EEPROM_
-#ifdef CONFIG_DRIVER_OMAP34XX_I2C
+#ifdef CONFIG_SYS_I2C_OMAP34XX
int cl_eeprom_read_mac_addr(uchar *buf);
u32 cl_eeprom_get_board_rev(void);
#else
*/
int misc_init_r(void)
{
-#ifdef CONFIG_DRIVER_OMAP34XX_I2C
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#ifdef CONFIG_SYS_I2C_OMAP34XX
+ i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
#endif
dieid_num_r();
{
int revision;
-#ifdef CONFIG_DRIVER_OMAP34XX_I2C
+#ifdef CONFIG_SYS_I2C_OMAP34XX
unsigned char data;
/* board revisions <= R2410 connect 4030 irq_1 to gpio112 */
{
/* Initalize the board header */
enable_i2c0_pin_mux();
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+ i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
enable_board_pin_mux();
}
*/
int board_init(void)
{
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+ i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
{
/* Initalize the board header */
enable_i2c0_pin_mux();
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+ i2c_set_bus_num(0);
if (read_eeprom() < 0)
puts("Could not get board ID.\n");
#if defined(CONFIG_HW_WATCHDOG)
hw_watchdog_init();
#endif /* defined(CONFIG_HW_WATCHDOG) */
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+ i2c_set_bus_num(0);
if (read_eeprom() < 0)
puts("Could not get board ID.\n");
struct am335x_baseboard_id header;
enable_i2c0_pin_mux();
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+ i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
if (read_eeprom(&header) < 0)
puts("Could not get board ID.\n");
*/
int misc_init_r(void)
{
-#ifdef CONFIG_DRIVER_OMAP34XX_I2C
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#ifdef CONFIG_SYS_I2C_OMAP34XX
+ i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
#endif
dieid_num_r();
int misc_init_r(void)
{
-#ifdef CONFIG_DRIVER_OMAP34XX_I2C
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#ifdef CONFIG_SYS_I2C_OMAP34XX
+ i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
#endif
#if defined(CONFIG_CMD_NET)
obj-$(CONFIG_I2C_MV) += mv_i2c.o
obj-$(CONFIG_I2C_MXS) += mxs_i2c.o
obj-$(CONFIG_DRIVER_OMAP1510_I2C) += omap1510_i2c.o
-obj-$(CONFIG_DRIVER_OMAP24XX_I2C) += omap24xx_i2c.o
-obj-$(CONFIG_DRIVER_OMAP34XX_I2C) += omap24xx_i2c.o
obj-$(CONFIG_PCA9564_I2C) += pca9564_i2c.o
obj-$(CONFIG_DRIVER_S3C24X0_I2C) += s3c24x0_i2c.o
obj-$(CONFIG_TSI108_I2C) += tsi108_i2c.o
obj-$(CONFIG_SYS_I2C_FSL) += fsl_i2c.o
obj-$(CONFIG_SYS_I2C_FTI2C010) += fti2c010.o
obj-$(CONFIG_SYS_I2C_MXC) += mxc_i2c.o
+obj-$(CONFIG_SYS_I2C_OMAP24XX) += omap24xx_i2c.o
+obj-$(CONFIG_SYS_I2C_OMAP34XX) += omap24xx_i2c.o
obj-$(CONFIG_SYS_I2C_PPC4XX) += ppc4xx_i2c.o
obj-$(CONFIG_SYS_I2C_RCAR) += rcar_i2c.o
obj-$(CONFIG_SYS_I2C_SH) += sh_i2c.o
*/
#include <common.h>
+#include <i2c.h>
#include <asm/arch/i2c.h>
#include <asm/io.h>
/* Absolutely safe for status update at 100 kHz I2C: */
#define I2C_WAIT 200
-static int wait_for_bb(void);
-static u16 wait_for_event(void);
-static void flush_fifo(void);
+static int wait_for_bb(struct i2c_adapter *adap);
+static struct i2c *omap24_get_base(struct i2c_adapter *adap);
+static u16 wait_for_event(struct i2c_adapter *adap);
+static void flush_fifo(struct i2c_adapter *adap);
-/*
- * For SPL boot some boards need i2c before SDRAM is initialised so force
- * variables to live in SRAM
- */
-static struct i2c __attribute__((section (".data"))) *i2c_base =
- (struct i2c *)I2C_DEFAULT_BASE;
-static unsigned int __attribute__((section (".data"))) bus_initialized[I2C_BUS_MAX] =
- { [0 ... (I2C_BUS_MAX-1)] = 0 };
-static unsigned int __attribute__((section (".data"))) current_bus = 0;
-
-void i2c_init(int speed, int slaveadd)
+static void omap24_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd)
{
+ struct i2c *i2c_base = omap24_get_base(adap);
int psc, fsscll, fssclh;
int hsscll = 0, hssclh = 0;
u32 scll, sclh;
I2C_IE_NACK_IE | I2C_IE_AL_IE, &i2c_base->ie);
#endif
udelay(1000);
- flush_fifo();
+ flush_fifo(adap);
writew(0xFFFF, &i2c_base->stat);
writew(0, &i2c_base->cnt);
-
- if (gd->flags & GD_FLG_RELOC)
- bus_initialized[current_bus] = 1;
}
-static void flush_fifo(void)
-{ u16 stat;
+static void flush_fifo(struct i2c_adapter *adap)
+{
+ struct i2c *i2c_base = omap24_get_base(adap);
+ u16 stat;
/* note: if you try and read data when its not there or ready
* you get a bus error
* i2c_probe: Use write access. Allows to identify addresses that are
* write-only (like the config register of dual-port EEPROMs)
*/
-int i2c_probe(uchar chip)
+static int omap24_i2c_probe(struct i2c_adapter *adap, uchar chip)
{
+ struct i2c *i2c_base = omap24_get_base(adap);
u16 status;
int res = 1; /* default = fail */
return res;
/* Wait until bus is free */
- if (wait_for_bb())
+ if (wait_for_bb(adap))
return res;
/* No data transfer, slave addr only */
writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX |
I2C_CON_STP, &i2c_base->con);
- status = wait_for_event();
+ status = wait_for_event(adap);
if ((status & ~I2C_STAT_XRDY) == 0 || (status & I2C_STAT_AL)) {
/*
*/
if (status == I2C_STAT_XRDY)
printf("i2c_probe: pads on bus %d probably not configured (status=0x%x)\n",
- current_bus, status);
+ adap->hwadapnr, status);
goto pr_exit;
}
I2C_CON_STP, &i2c_base->con); /* STP */
}
pr_exit:
- flush_fifo();
+ flush_fifo(adap);
writew(0xFFFF, &i2c_base->stat);
writew(0, &i2c_base->cnt);
return res;
* or that do not need a register address at all (such as some clock
* distributors).
*/
-int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
+static int omap24_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
+ int alen, uchar *buffer, int len)
{
+ struct i2c *i2c_base = omap24_get_base(adap);
int i2c_error = 0;
u16 status;
}
/* Wait until bus not busy */
- if (wait_for_bb())
+ if (wait_for_bb(adap))
return 1;
/* Zero, one or two bytes reg address (offset) */
#endif
/* Send register offset */
while (1) {
- status = wait_for_event();
+ status = wait_for_event(adap);
/* Try to identify bus that is not padconf'd for I2C */
if (status == I2C_STAT_XRDY) {
i2c_error = 2;
printf("i2c_read (addr phase): pads on bus %d probably not configured (status=0x%x)\n",
- current_bus, status);
+ adap->hwadapnr, status);
goto rd_exit;
}
if (status == 0 || status & I2C_STAT_NACK) {
/* Receive data */
while (1) {
- status = wait_for_event();
+ status = wait_for_event(adap);
/*
* Try to identify bus that is not padconf'd for I2C. This
* state could be left over from previous transactions if
if (status == I2C_STAT_XRDY) {
i2c_error = 2;
printf("i2c_read (data phase): pads on bus %d probably not configured (status=0x%x)\n",
- current_bus, status);
+ adap->hwadapnr, status);
goto rd_exit;
}
if (status == 0 || status & I2C_STAT_NACK) {
}
rd_exit:
- flush_fifo();
+ flush_fifo(adap);
writew(0xFFFF, &i2c_base->stat);
writew(0, &i2c_base->cnt);
return i2c_error;
}
/* i2c_write: Address (reg offset) may be 0, 1 or 2 bytes long. */
-int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
+static int omap24_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr,
+ int alen, uchar *buffer, int len)
{
+ struct i2c *i2c_base = omap24_get_base(adap);
int i;
u16 status;
int i2c_error = 0;
}
/* Wait until bus not busy */
- if (wait_for_bb())
+ if (wait_for_bb(adap))
return 1;
/* Start address phase - will write regoffset + len bytes data */
while (alen) {
/* Must write reg offset (one or two bytes) */
- status = wait_for_event();
+ status = wait_for_event(adap);
/* Try to identify bus that is not padconf'd for I2C */
if (status == I2C_STAT_XRDY) {
i2c_error = 2;
printf("i2c_write: pads on bus %d probably not configured (status=0x%x)\n",
- current_bus, status);
+ adap->hwadapnr, status);
goto wr_exit;
}
if (status == 0 || status & I2C_STAT_NACK) {
}
/* Address phase is over, now write data */
for (i = 0; i < len; i++) {
- status = wait_for_event();
+ status = wait_for_event(adap);
if (status == 0 || status & I2C_STAT_NACK) {
i2c_error = 1;
printf("i2c_write: error waiting for data ACK (status=0x%x)\n",
}
wr_exit:
- flush_fifo();
+ flush_fifo(adap);
writew(0xFFFF, &i2c_base->stat);
writew(0, &i2c_base->cnt);
return i2c_error;
* Wait for the bus to be free by checking the Bus Busy (BB)
* bit to become clear
*/
-static int wait_for_bb(void)
+static int wait_for_bb(struct i2c_adapter *adap)
{
+ struct i2c *i2c_base = omap24_get_base(adap);
int timeout = I2C_TIMEOUT;
u16 stat;
* Wait for the I2C controller to complete current action
* and update status
*/
-static u16 wait_for_event(void)
+static u16 wait_for_event(struct i2c_adapter *adap)
{
+ struct i2c *i2c_base = omap24_get_base(adap);
u16 status;
int timeout = I2C_TIMEOUT;
* not been configured for I2C, and/or pull-ups are missing.
*/
printf("Check if pads/pull-ups of bus %d are properly configured\n",
- current_bus);
+ adap->hwadapnr);
writew(0xFFFF, &i2c_base->stat);
status = 0;
}
return status;
}
-int i2c_set_bus_num(unsigned int bus)
+static struct i2c *omap24_get_base(struct i2c_adapter *adap)
{
- if (bus >= I2C_BUS_MAX) {
- printf("Bad bus: %x\n", bus);
- return -1;
- }
-
- switch (bus) {
- default:
- bus = 0; /* Fall through */
+ switch (adap->hwadapnr) {
case 0:
- i2c_base = (struct i2c *)I2C_BASE1;
+ return (struct i2c *)I2C_BASE1;
break;
case 1:
- i2c_base = (struct i2c *)I2C_BASE2;
+ return (struct i2c *)I2C_BASE2;
break;
#if (I2C_BUS_MAX > 2)
case 2:
- i2c_base = (struct i2c *)I2C_BASE3;
+ return (struct i2c *)I2C_BASE3;
break;
#if (I2C_BUS_MAX > 3)
case 3:
- i2c_base = (struct i2c *)I2C_BASE4;
+ return (struct i2c *)I2C_BASE4;
break;
#if (I2C_BUS_MAX > 4)
case 4:
- i2c_base = (struct i2c *)I2C_BASE5;
+ return (struct i2c *)I2C_BASE5;
break;
#endif
#endif
#endif
+ default:
+ printf("wrong hwadapnr: %d\n", adap->hwadapnr);
+ break;
}
+ return NULL;
+}
- current_bus = bus;
+#if !defined(CONFIG_SYS_OMAP24_I2C_SPEED1)
+#define CONFIG_SYS_OMAP24_I2C_SPEED1 CONFIG_SYS_OMAP24_I2C_SPEED
+#endif
+#if !defined(CONFIG_SYS_OMAP24_I2C_SLAVE1)
+#define CONFIG_SYS_OMAP24_I2C_SLAVE1 CONFIG_SYS_OMAP24_I2C_SLAVE
+#endif
- if (!bus_initialized[current_bus])
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+U_BOOT_I2C_ADAP_COMPLETE(omap24_0, omap24_i2c_init, omap24_i2c_probe,
+ omap24_i2c_read, omap24_i2c_write, NULL,
+ CONFIG_SYS_OMAP24_I2C_SPEED,
+ CONFIG_SYS_OMAP24_I2C_SLAVE,
+ 0)
+U_BOOT_I2C_ADAP_COMPLETE(omap24_1, omap24_i2c_init, omap24_i2c_probe,
+ omap24_i2c_read, omap24_i2c_write, NULL,
+ CONFIG_SYS_OMAP24_I2C_SPEED1,
+ CONFIG_SYS_OMAP24_I2C_SLAVE1,
+ 1)
+#if (I2C_BUS_MAX > 2)
+#if !defined(CONFIG_SYS_OMAP24_I2C_SPEED2)
+#define CONFIG_SYS_OMAP24_I2C_SPEED2 CONFIG_SYS_OMAP24_I2C_SPEED
+#endif
+#if !defined(CONFIG_SYS_OMAP24_I2C_SLAVE2)
+#define CONFIG_SYS_OMAP24_I2C_SLAVE2 CONFIG_SYS_OMAP24_I2C_SLAVE
+#endif
- return 0;
-}
+U_BOOT_I2C_ADAP_COMPLETE(omap24_2, omap24_i2c_init, omap24_i2c_probe,
+ omap24_i2c_read, omap24_i2c_write, NULL,
+ CONFIG_SYS_OMAP24_I2C_SPEED2,
+ CONFIG_SYS_OMAP24_I2C_SLAVE2,
+ 2)
+#if (I2C_BUS_MAX > 3)
+#if !defined(CONFIG_SYS_OMAP24_I2C_SPEED3)
+#define CONFIG_SYS_OMAP24_I2C_SPEED3 CONFIG_SYS_OMAP24_I2C_SPEED
+#endif
+#if !defined(CONFIG_SYS_OMAP24_I2C_SLAVE3)
+#define CONFIG_SYS_OMAP24_I2C_SLAVE3 CONFIG_SYS_OMAP24_I2C_SLAVE
+#endif
-int i2c_get_bus_num(void)
-{
- return (int) current_bus;
-}
+U_BOOT_I2C_ADAP_COMPLETE(omap24_3, omap24_i2c_init, omap24_i2c_probe,
+ omap24_i2c_read, omap24_i2c_write, NULL,
+ CONFIG_SYS_OMAP24_I2C_SPEED3,
+ CONFIG_SYS_OMAP24_I2C_SLAVE3,
+ 3)
+#if (I2C_BUS_MAX > 4)
+#if !defined(CONFIG_SYS_OMAP24_I2C_SPEED4)
+#define CONFIG_SYS_OMAP24_I2C_SPEED4 CONFIG_SYS_OMAP24_I2C_SPEED
+#endif
+#if !defined(CONFIG_SYS_OMAP24_I2C_SLAVE4)
+#define CONFIG_SYS_OMAP24_I2C_SLAVE4 CONFIG_SYS_OMAP24_I2C_SLAVE
+#endif
+
+U_BOOT_I2C_ADAP_COMPLETE(omap24_4, omap24_i2c_init, omap24_i2c_probe,
+ omap24_i2c_read, omap24_i2c_write, NULL,
+ CONFIG_SYS_OMAP24_I2C_SPEED4,
+ CONFIG_SYS_OMAP24_I2C_SLAVE4,
+ 4)
+#endif
+#endif
+#endif
#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
#define CONFIG_BAUDRATE 115200
-/* I2C Configuration */
#define CONFIG_CMD_EEPROM
#define CONFIG_ENV_EEPROM_IS_ON_I2C
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
#undef CONFIG_CMD_IMLS /* List all found images */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP34XX_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
#undef CONFIG_CMD_NET
#undef CONFIG_CMD_NFS
#undef CONFIG_CMD_IMLS /* List all found images */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP34XX_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
#undef CONFIG_CMD_NET
#undef CONFIG_CMD_NFS
#undef CONFIG_CMD_IMLS /* List all found images */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP34XX_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_DOS_PARTITION 1
/* I2C */
-#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP34XX_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
/* TWL4030 */
#define CONFIG_TWL4030_POWER 1
#undef CONFIG_CMD_NFS /* NFS support */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP34XX_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
/*
* TWL4030
#undef CONFIG_CMD_IMLS /* List all found images */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP34XX_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
/* RTC */
#define CONFIG_RTC_DS1337
#undef CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
#define CONFIG_OMAP3_SPI
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP34XX_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
/*
* TWL4030
#undef CONFIG_CMD_IMLS /* List all found images */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_I2C_MULTI_BUS 1
-#define CONFIG_DRIVER_OMAP34XX_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
#define CONFIG_VIDEO_OMAP3 /* DSS Support */
/*
/*
* I2C
*/
-#define CONFIG_HARD_I2C
-#define CONFIG_DRIVER_OMAP34XX_I2C
-
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
/*
* PISMO support
#undef CONFIG_CMD_IMLS /* List all found images */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP34XX_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_OMAP34XX
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
/*
* TWL4030
/*
* I2C
*/
-#define CONFIG_HARD_I2C
-#define CONFIG_DRIVER_OMAP34XX_I2C
-
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
/*
* TWL4030
#define CONFIG_CMD_PING
#define CONFIG_CMD_FPGA
-#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 0
-#define CONFIG_DRIVER_OMAP34XX_I2C 1
-#define CONFIG_I2C_MULTI_BUS 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
/*
* TWL4030
#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_DRIVER_OMAP34XX_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
/*
* TWL4030
#undef CONFIG_CMD_NFS /* NFS support */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP34XX_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
/*
* TWL4030
/*
* I2C for power management setup
*/
-#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP34XX_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
/* OMITTED: single 1 Gbit MT29F1G NAND flash */
#undef CONFIG_CMD_NFS /* NFS support */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP34XX_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
/*
* TWL4030
#undef CONFIG_CMD_NFS /* NFS support */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP34XX_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
/*
* TWL4030
/* I2C Configuration */
#define CONFIG_I2C
#define CONFIG_CMD_I2C
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_DRIVER_OMAP24XX_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP24XX
#define CONFIG_CMD_EEPROM
#define CONFIG_ENV_EEPROM_IS_ON_I2C
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
/* I2C Configuration */
#define CONFIG_I2C
#define CONFIG_CMD_I2C
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_DRIVER_OMAP24XX_I2C
-
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED OMAP_I2C_STANDARD
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP24XX
/* Defines for SPL */
#define CONFIG_SPL
#undef CONFIG_CMD_IMLS
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 400000
-#define CONFIG_SYS_I2C_SLAVE 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 400000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* base address */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */
#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07
-#define CONFIG_DRIVER_OMAP34XX_I2C
-
/*
* Board NAND Info.
#define TAM3517_READ_EEPROM(info, ret) \
do { \
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); \
+ i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); \
if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, \
(void *)info, sizeof(*info))) \
ret = 1; \
/* I2C IP block */
#define CONFIG_I2C
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_DRIVER_OMAP24XX_I2C
#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP24XX
/* MMC/SD IP block */
#define CONFIG_MMC
#define CONFIG_DOS_PARTITION
/* I2C */
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP34XX_I2C 1
-#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
+
/* EEPROM */
#define CONFIG_SYS_I2C_MULTI_EEPROMS
projects / u-boot.git / commitdiff