arm: imx8: factor out uart init code

New imx8 boards started adding duplicated UART init code.
Factor out this to common function sc_pm_setup_uart().

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

diff --git a/arch/arm/include/asm/arch-imx8/sys_proto.h b/arch/arm/include/asm/arch-imx8/sys_proto.h
index 73ffaba7d55bd03f7a2b3b850faa3da15b6cca64..3f5bbe9dcc322f3996d65cbbbb8c5b788dea269d 100644 (file)
--- a/arch/arm/include/asm/arch-imx8/sys_proto.h
+++ b/arch/arm/include/asm/arch-imx8/sys_proto.h
@@ -3,6 +3,7 @@
  * Copyright 2018 NXP
  */
 
+#include <asm/arch/sci/sci.h>
 #include <asm/mach-imx/sys_proto.h>
 #include <linux/types.h>
 
@@ -17,3 +18,4 @@ struct pass_over_info_t {
 
 enum boot_device get_boot_device(void);
 int print_bootinfo(void);
+int sc_pm_setup_uart(sc_rsrc_t uart_rsrc, sc_pm_clock_rate_t clk_rate);

diff --git a/arch/arm/mach-imx/imx8/Makefile b/arch/arm/mach-imx/imx8/Makefile
index 31ad169ccf3c1e937c2c17e1fe5c4df01d8f4be4..92b5c56acb25c1d77d2d4969521204bb6dd54bc2 100644 (file)
--- a/arch/arm/mach-imx/imx8/Makefile
+++ b/arch/arm/mach-imx/imx8/Makefile
@@ -4,4 +4,4 @@
 # SPDX-License-Identifier:     GPL-2.0+
 #
 
-obj-y += cpu.o iomux.o
+obj-y += cpu.o iomux.o misc.o

diff --git a/arch/arm/mach-imx/imx8/misc.c b/arch/arm/mach-imx/imx8/misc.c
new file mode 100644 (file)
index 0000000..fb92362
--- /dev/null
+++ b/arch/arm/mach-imx/imx8/misc.c
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include <common.h>
+#include <asm/arch/sci/sci.h>
+
+int sc_pm_setup_uart(sc_rsrc_t uart_rsrc, sc_pm_clock_rate_t clk_rate)
+{
+       sc_pm_clock_rate_t rate = clk_rate;
+       int ret;
+
+       /* Power up UARTn */
+       ret = sc_pm_set_resource_power_mode(-1, uart_rsrc, SC_PM_PW_MODE_ON);
+       if (ret)
+               return ret;
+
+       /* Set UARTn clock root to 'rate' MHz */
+       ret = sc_pm_set_clock_rate(-1, uart_rsrc, SC_PM_CLK_PER, &rate);
+       if (ret)
+               return ret;
+
+       /* Enable UARTn clock root */
+       ret = sc_pm_clock_enable(-1, uart_rsrc, SC_PM_CLK_PER, true, false);
+       if (ret)
+               return ret;
+
+       return 0;
+}

diff --git a/board/freescale/imx8qm_mek/imx8qm_mek.c b/board/freescale/imx8qm_mek/imx8qm_mek.c
index e69efc4dd62a36d41627fa467b29129b602667c6..249c29e0f2b8b2abefea11e94038a60ecbb0bd1d 100644 (file)
--- a/board/freescale/imx8qm_mek/imx8qm_mek.c
+++ b/board/freescale/imx8qm_mek/imx8qm_mek.c
@@ -34,21 +34,11 @@ static void setup_iomux_uart(void)
 
 int board_early_init_f(void)
 {
+       sc_pm_clock_rate_t rate = SC_80MHZ;
        int ret;
-       /* Set UART0 clock root to 80 MHz */
-       sc_pm_clock_rate_t rate = 80000000;
-
-       /* Power up UART0 */
-       ret = sc_pm_set_resource_power_mode(-1, SC_R_UART_0, SC_PM_PW_MODE_ON);
-       if (ret)
-               return ret;
 
-       ret = sc_pm_set_clock_rate(-1, SC_R_UART_0, 2, &rate);
-       if (ret)
-               return ret;
-
-       /* Enable UART0 clock root */
-       ret = sc_pm_clock_enable(-1, SC_R_UART_0, 2, true, false);
+       /* Set UART0 clock root to 80 MHz */
+       ret = sc_pm_setup_uart(SC_R_UART_0, rate);
        if (ret)
                return ret;
 

diff --git a/board/freescale/imx8qxp_mek/imx8qxp_mek.c b/board/freescale/imx8qxp_mek/imx8qxp_mek.c
index 120731422c973445dc9221d33b2483ca7480167f..82a79033af4913a3d6541d6315d0f7dffe78f0e7 100644 (file)
--- a/board/freescale/imx8qxp_mek/imx8qxp_mek.c
+++ b/board/freescale/imx8qxp_mek/imx8qxp_mek.c
@@ -40,21 +40,11 @@ static void setup_iomux_uart(void)
 
 int board_early_init_f(void)
 {
+       sc_pm_clock_rate_t rate = SC_80MHZ;
        int ret;
-       /* Set UART0 clock root to 80 MHz */
-       sc_pm_clock_rate_t rate = 80000000;
-
-       /* Power up UART0 */
-       ret = sc_pm_set_resource_power_mode(-1, SC_R_UART_0, SC_PM_PW_MODE_ON);
-       if (ret)
-               return ret;
 
-       ret = sc_pm_set_clock_rate(-1, SC_R_UART_0, 2, &rate);
-       if (ret)
-               return ret;
-
-       /* Enable UART0 clock root */
-       ret = sc_pm_clock_enable(-1, SC_R_UART_0, 2, true, false);
+       /* Set UART0 clock root to 80 MHz */
+       ret = sc_pm_setup_uart(SC_R_UART_0, rate);
        if (ret)
                return ret;
 

diff --git a/board/toradex/apalis-imx8/apalis-imx8.c b/board/toradex/apalis-imx8/apalis-imx8.c
index f516e546a8d6c62de85c3a91df09386c6b371e82..4243b0e174e17365808c873e7a7546efa0d341de 100644 (file)
--- a/board/toradex/apalis-imx8/apalis-imx8.c
+++ b/board/toradex/apalis-imx8/apalis-imx8.c
@@ -37,22 +37,11 @@ static void setup_iomux_uart(void)
 
 int board_early_init_f(void)
 {
-       sc_pm_clock_rate_t rate;
+       sc_pm_clock_rate_t rate = SC_80MHZ;
        sc_err_t err = 0;
 
-       /* Power up UART1 */
-       err = sc_pm_set_resource_power_mode(-1, SC_R_UART_1, SC_PM_PW_MODE_ON);
-       if (err != SC_ERR_NONE)
-               return 0;
-
-       /* Set UART3 clock root to 80 MHz */
-       rate = 80000000;
-       err = sc_pm_set_clock_rate(-1, SC_R_UART_1, SC_PM_CLK_PER, &rate);
-       if (err != SC_ERR_NONE)
-               return 0;
-
-       /* Enable UART1 clock root */
-       err = sc_pm_clock_enable(-1, SC_R_UART_1, SC_PM_CLK_PER, true, false);
+       /* Set UART1 clock root to 80 MHz and enable it */
+       err = sc_pm_setup_uart(SC_R_UART_1, rate);
        if (err != SC_ERR_NONE)
                return 0;
 

diff --git a/board/toradex/colibri-imx8x/colibri-imx8x.c b/board/toradex/colibri-imx8x/colibri-imx8x.c
index aa8eaa0ea13aa43ffae26de17df5357efc354998..a146148556ff254f3ea2fe2a0803b0b4d2f6d5ba 100644 (file)
--- a/board/toradex/colibri-imx8x/colibri-imx8x.c
+++ b/board/toradex/colibri-imx8x/colibri-imx8x.c
@@ -51,19 +51,9 @@ int board_early_init_f(void)
        if (err != SC_ERR_NONE)
                return 0;
 
-       /* Power up UART3 */
-       err = sc_pm_set_resource_power_mode(-1, SC_R_UART_3, SC_PM_PW_MODE_ON);
-       if (err != SC_ERR_NONE)
-               return 0;
-
-       /* Set UART3 clock root to 80 MHz */
-       rate = 80000000;
-       err = sc_pm_set_clock_rate(-1, SC_R_UART_3, SC_PM_CLK_PER, &rate);
-       if (err != SC_ERR_NONE)
-               return 0;
-
-       /* Enable UART3 clock root */
-       err = sc_pm_clock_enable(-1, SC_R_UART_3, SC_PM_CLK_PER, true, false);
+       /* Set UART3 clock root to 80 MHz and enable it */
+       rate = SC_80MHZ;
+       err = sc_pm_setup_uart(SC_R_UART_3, rate);
        if (err != SC_ERR_NONE)
                return 0;