]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
spi: ti_qspi: Drop non DM code
authorVignesh Raghavendra <vigneshr@ti.com>
Tue, 16 Apr 2019 16:01:59 +0000 (21:31 +0530)
committerJagan Teki <jagan@amarulasolutions.com>
Wed, 17 Apr 2019 12:13:19 +0000 (17:43 +0530)
Now that all boards using TI QSPI have moved to DM and DT, drop non DM
code completely.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[jagan: update MIGRATION.txt, rebase config_whitelist.txt]
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
doc/driver-model/MIGRATION.txt
drivers/spi/Kconfig
drivers/spi/Makefile
drivers/spi/ti_qspi.c
include/configs/am43xx_evm.h
include/configs/am57xx_evm.h
include/configs/cm_t43.h
include/configs/dra7xx_evm.h
scripts/config_whitelist.txt

index 957529202b5ea63b6eb54a73a0e27944f270e553..df659f3dd921e9a6c3e7b3513e60589a2a4fb3fd 100644 (file)
@@ -77,7 +77,6 @@ Partially converted:
        drivers/spi/kirkwood_spi.c
        drivers/spi/mxc_spi.c
        drivers/spi/omap3_spi.c
-       drivers/spi/ti_qspi.c
 
        Status: In progress
        Deadline: 2019.07
index a700f240adff4834c30c3070fb838b90bb25affc..fb794adae725d8e1736dedd2ed5c35d31a39b610 100644 (file)
@@ -259,6 +259,13 @@ config TEGRA210_QSPI
          be used to access SPI chips on platforms embedding this
          NVIDIA Tegra210 IP core.
 
+config TI_QSPI
+       bool "TI QSPI driver"
+       imply TI_EDMA3
+       help
+         Enable the TI Quad-SPI (QSPI) driver for DRA7xx and AM43xx evms.
+         This driver support spi flash single, quad and memory reads.
+
 config XILINX_SPI
        bool "Xilinx SPI driver"
        help
@@ -346,12 +353,6 @@ config SH_QSPI
          Enable the Renesas Quad SPI controller driver. This driver can be
          used on Renesas SoCs.
 
-config TI_QSPI
-       bool "TI QSPI driver"
-       help
-         Enable the TI Quad-SPI (QSPI) driver for DRA7xx and AM43xx evms.
-         This driver support spi flash single, quad and memory reads.
-
 config KIRKWOOD_SPI
        bool "Marvell Kirkwood SPI Driver"
        help
index 01907bef795007f3d26070e95b91a5178aca4f88..8be9a4baa2446fc28cd393785f7f767806bf0ace 100644 (file)
@@ -9,6 +9,7 @@ obj-y += spi-uclass.o
 obj-$(CONFIG_SANDBOX) += spi-emul-uclass.o
 obj-$(CONFIG_SOFT_SPI) += soft_spi.o
 obj-$(CONFIG_SPI_MEM) += spi-mem.o
+obj-$(CONFIG_TI_QSPI) += ti_qspi.o
 else
 obj-y += spi.o
 obj-$(CONFIG_SPI_MEM) += spi-mem-nodm.o
@@ -56,7 +57,6 @@ obj-$(CONFIG_TEGRA114_SPI) += tegra114_spi.o
 obj-$(CONFIG_TEGRA20_SFLASH) += tegra20_sflash.o
 obj-$(CONFIG_TEGRA20_SLINK) += tegra20_slink.o
 obj-$(CONFIG_TEGRA210_QSPI) += tegra210_qspi.o
-obj-$(CONFIG_TI_QSPI) += ti_qspi.o
 obj-$(CONFIG_XILINX_SPI) += xilinx_spi.o
 obj-$(CONFIG_ZYNQ_SPI) += zynq_spi.o
 obj-$(CONFIG_ZYNQ_QSPI) += zynq_qspi.o
index 2dcce66de0482fac825f44dd5b3fcf29ef85af38..731fb23022d2bff3a21d53d0dc217027942232f1 100644 (file)
@@ -52,9 +52,6 @@ DECLARE_GLOBAL_DATA_PTR;
 #define MM_SWITCH                       0x01
 #define MEM_CS(cs)                      ((cs + 1) << 8)
 #define MEM_CS_UNSELECT                 0xfffff8ff
-#define MMAP_START_ADDR_DRA            0x5c000000
-#define MMAP_START_ADDR_AM43x          0x30000000
-#define CORE_CTRL_IO                    0x4a002558
 
 #define QSPI_CMD_READ                   (0x3 << 0)
 #define QSPI_CMD_READ_DUAL             (0x6b << 0)
@@ -98,13 +95,9 @@ struct ti_qspi_regs {
 
 /* ti qspi priv */
 struct ti_qspi_priv {
-#ifndef CONFIG_DM_SPI
-       struct spi_slave slave;
-#else
        void *memory_map;
        uint max_hz;
        u32 num_cs;
-#endif
        struct ti_qspi_regs *base;
        void *ctrl_mod_mmap;
        ulong fclk;
@@ -113,8 +106,9 @@ struct ti_qspi_priv {
        u32 dc;
 };
 
-static void ti_spi_set_speed(struct ti_qspi_priv *priv, uint hz)
+static int ti_qspi_set_speed(struct udevice *bus, uint hz)
 {
+       struct ti_qspi_priv *priv = dev_get_priv(bus);
        uint clk_div;
 
        if (!hz)
@@ -133,6 +127,8 @@ static void ti_spi_set_speed(struct ti_qspi_priv *priv, uint hz)
               &priv->base->clk_ctrl);
        /* enable SCLK and program the clk divider */
        writel(QSPI_CLK_EN | clk_div, &priv->base->clk_ctrl);
+
+       return 0;
 }
 
 static void ti_qspi_cs_deactivate(struct ti_qspi_priv *priv)
@@ -142,38 +138,6 @@ static void ti_qspi_cs_deactivate(struct ti_qspi_priv *priv)
        readl(&priv->base->cmd);
 }
 
-static int __ti_qspi_set_mode(struct ti_qspi_priv *priv, unsigned int mode)
-{
-       priv->dc = 0;
-       if (mode & SPI_CPHA)
-               priv->dc |= QSPI_CKPHA(0);
-       if (mode & SPI_CPOL)
-               priv->dc |= QSPI_CKPOL(0);
-       if (mode & SPI_CS_HIGH)
-               priv->dc |= QSPI_CSPOL(0);
-
-       return 0;
-}
-
-static int __ti_qspi_claim_bus(struct ti_qspi_priv *priv, int cs)
-{
-       writel(priv->dc, &priv->base->dc);
-       writel(0, &priv->base->cmd);
-       writel(0, &priv->base->data);
-
-       priv->dc <<= cs * 8;
-       writel(priv->dc, &priv->base->dc);
-
-       return 0;
-}
-
-static void __ti_qspi_release_bus(struct ti_qspi_priv *priv)
-{
-       writel(0, &priv->base->dc);
-       writel(0, &priv->base->cmd);
-       writel(0, &priv->base->data);
-}
-
 static void ti_qspi_ctrl_mode_mmap(void *ctrl_mod_mmap, int cs, bool enable)
 {
        u32 val;
@@ -186,15 +150,26 @@ static void ti_qspi_ctrl_mode_mmap(void *ctrl_mod_mmap, int cs, bool enable)
        writel(val, ctrl_mod_mmap);
 }
 
-static int __ti_qspi_xfer(struct ti_qspi_priv *priv, unsigned int bitlen,
-                       const void *dout, void *din, unsigned long flags,
-                       u32 cs)
+static int ti_qspi_xfer(struct udevice *dev, unsigned int bitlen,
+                       const void *dout, void *din, unsigned long flags)
 {
+       struct dm_spi_slave_platdata *slave = dev_get_parent_platdata(dev);
+       struct ti_qspi_priv *priv;
+       struct udevice *bus;
        uint words = bitlen >> 3; /* fixed 8-bit word length */
        const uchar *txp = dout;
        uchar *rxp = din;
        uint status;
        int timeout;
+       unsigned int cs = slave->cs;
+
+       bus = dev->parent;
+       priv = dev_get_priv(bus);
+
+       if (cs > priv->num_cs) {
+               debug("invalid qspi chip select\n");
+               return -EINVAL;
+       }
 
        /* Setup mmap flags */
        if (flags & SPI_XFER_MMAP) {
@@ -316,126 +291,6 @@ void spi_flash_copy_mmap(void *data, void *offset, size_t len)
 }
 #endif
 
-#ifndef CONFIG_DM_SPI
-
-static inline struct ti_qspi_priv *to_ti_qspi_priv(struct spi_slave *slave)
-{
-       return container_of(slave, struct ti_qspi_priv, slave);
-}
-
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
-       return 1;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
-       /* CS handled in xfer */
-       return;
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
-       struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
-       ti_qspi_cs_deactivate(priv);
-}
-
-void spi_init(void)
-{
-       /* nothing to do */
-}
-
-static void ti_spi_setup_spi_register(struct ti_qspi_priv *priv)
-{
-       u32 memval = 0;
-
-#ifdef CONFIG_QSPI_QUAD_SUPPORT
-       struct spi_slave *slave = &priv->slave;
-       memval |= (QSPI_CMD_READ_QUAD | QSPI_SETUP0_NUM_A_BYTES |
-                       QSPI_SETUP0_NUM_D_BYTES_8_BITS |
-                       QSPI_SETUP0_READ_QUAD | QSPI_CMD_WRITE |
-                       QSPI_NUM_DUMMY_BITS);
-       slave->mode |= SPI_RX_QUAD;
-#else
-       memval |= QSPI_CMD_READ | QSPI_SETUP0_NUM_A_BYTES |
-                       QSPI_SETUP0_NUM_D_BYTES_NO_BITS |
-                       QSPI_SETUP0_READ_NORMAL | QSPI_CMD_WRITE |
-                       QSPI_NUM_DUMMY_BITS;
-#endif
-
-       writel(memval, &priv->base->setup0);
-}
-
-struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
-                                 unsigned int max_hz, unsigned int mode)
-{
-       struct ti_qspi_priv *priv;
-
-#ifdef CONFIG_AM43XX
-       gpio_request(CONFIG_QSPI_SEL_GPIO, "qspi_gpio");
-       gpio_direction_output(CONFIG_QSPI_SEL_GPIO, 1);
-#endif
-
-       priv = spi_alloc_slave(struct ti_qspi_priv, bus, cs);
-       if (!priv) {
-               printf("SPI_error: Fail to allocate ti_qspi_priv\n");
-               return NULL;
-       }
-
-       priv->base = (struct ti_qspi_regs *)QSPI_BASE;
-       priv->mode = mode;
-#if defined(CONFIG_DRA7XX)
-       priv->ctrl_mod_mmap = (void *)CORE_CTRL_IO;
-       priv->slave.memory_map = (void *)MMAP_START_ADDR_DRA;
-       priv->fclk = QSPI_DRA7XX_FCLK;
-#else
-       priv->slave.memory_map = (void *)MMAP_START_ADDR_AM43x;
-       priv->fclk = QSPI_FCLK;
-#endif
-
-       ti_spi_set_speed(priv, max_hz);
-
-#ifdef CONFIG_TI_SPI_MMAP
-       ti_spi_setup_spi_register(priv);
-#endif
-
-       return &priv->slave;
-}
-
-void spi_free_slave(struct spi_slave *slave)
-{
-       struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
-       free(priv);
-}
-
-int spi_claim_bus(struct spi_slave *slave)
-{
-       struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
-
-       debug("%s: bus:%i cs:%i\n", __func__, priv->slave.bus, priv->slave.cs);
-       __ti_qspi_set_mode(priv, priv->mode);
-       return __ti_qspi_claim_bus(priv, priv->slave.cs);
-}
-void spi_release_bus(struct spi_slave *slave)
-{
-       struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
-
-       debug("%s: bus:%i cs:%i\n", __func__, priv->slave.bus, priv->slave.cs);
-       __ti_qspi_release_bus(priv);
-}
-
-int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
-            void *din, unsigned long flags)
-{
-       struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
-
-       debug("spi_xfer: bus:%i cs:%i bitlen:%i flags:%lx\n",
-             priv->slave.bus, priv->slave.cs, bitlen, flags);
-       return __ti_qspi_xfer(priv, bitlen, dout, din, flags, priv->slave.cs);
-}
-
-#else /* CONFIG_DM_SPI */
-
 static void __ti_qspi_setup_memorymap(struct ti_qspi_priv *priv,
                                      struct spi_slave *slave,
                                      bool enable)
@@ -472,22 +327,21 @@ static void __ti_qspi_setup_memorymap(struct ti_qspi_priv *priv,
        writel(memval, &priv->base->setup0);
 }
 
-
-static int ti_qspi_set_speed(struct udevice *bus, uint max_hz)
+static int ti_qspi_set_mode(struct udevice *bus, uint mode)
 {
        struct ti_qspi_priv *priv = dev_get_priv(bus);
 
-       ti_spi_set_speed(priv, max_hz);
+       priv->dc = 0;
+       if (mode & SPI_CPHA)
+               priv->dc |= QSPI_CKPHA(0);
+       if (mode & SPI_CPOL)
+               priv->dc |= QSPI_CKPOL(0);
+       if (mode & SPI_CS_HIGH)
+               priv->dc |= QSPI_CSPOL(0);
 
        return 0;
 }
 
-static int ti_qspi_set_mode(struct udevice *bus, uint mode)
-{
-       struct ti_qspi_priv *priv = dev_get_priv(bus);
-       return __ti_qspi_set_mode(priv, mode);
-}
-
 static int ti_qspi_claim_bus(struct udevice *dev)
 {
        struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
@@ -505,7 +359,14 @@ static int ti_qspi_claim_bus(struct udevice *dev)
 
        __ti_qspi_setup_memorymap(priv, slave, true);
 
-       return __ti_qspi_claim_bus(priv, slave_plat->cs);
+       writel(priv->dc, &priv->base->dc);
+       writel(0, &priv->base->cmd);
+       writel(0, &priv->base->data);
+
+       priv->dc <<= slave_plat->cs * 8;
+       writel(priv->dc, &priv->base->dc);
+
+       return 0;
 }
 
 static int ti_qspi_release_bus(struct udevice *dev)
@@ -518,27 +379,12 @@ static int ti_qspi_release_bus(struct udevice *dev)
        priv = dev_get_priv(bus);
 
        __ti_qspi_setup_memorymap(priv, slave, false);
-       __ti_qspi_release_bus(priv);
-
-       return 0;
-}
 
-static int ti_qspi_xfer(struct udevice *dev, unsigned int bitlen,
-                       const void *dout, void *din, unsigned long flags)
-{
-       struct dm_spi_slave_platdata *slave = dev_get_parent_platdata(dev);
-       struct ti_qspi_priv *priv;
-       struct udevice *bus;
-
-       bus = dev->parent;
-       priv = dev_get_priv(bus);
-
-       if (slave->cs > priv->num_cs) {
-               debug("invalid qspi chip select\n");
-               return -EINVAL;
-       }
+       writel(0, &priv->base->dc);
+       writel(0, &priv->base->cmd);
+       writel(0, &priv->base->data);
 
-       return __ti_qspi_xfer(priv, bitlen, dout, din, flags, slave->cs);
+       return 0;
 }
 
 static int ti_qspi_probe(struct udevice *bus)
@@ -648,4 +494,3 @@ U_BOOT_DRIVER(ti_qspi) = {
        .probe  = ti_qspi_probe,
        .child_pre_probe = ti_qspi_child_pre_probe,
 };
-#endif /* CONFIG_DM_SPI */
index 5a6080645a85b0d6e9e5aca46e890f2f0aa01e6f..37d058ebbc209200fcd049636847424c3e1893ab 100644 (file)
 #define CONFIG_ENV_OFFSET_REDUND       0x120000
 #endif
 
-/* SPI */
-#define CONFIG_TI_SPI_MMAP
-#define CONFIG_QSPI_SEL_GPIO                   48
-#define CONFIG_QSPI_QUAD_SUPPORT
-#define CONFIG_TI_EDMA3
-
 #ifndef CONFIG_SPL_BUILD
 #include <environment/ti/dfu.h>
 #include <environment/ti/mmc.h>
index 48999847ee9146ab13ed01112abf5616e20fbb6e..c14b010550fe0c11642ae54ebf6a8371e61fe472 100644 (file)
 #define CONFIG_SYS_SPI_ARGS_SIZE        0x80000
 
 /* SPI SPL */
-#define CONFIG_TI_EDMA3
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x40000
 
-/* SPI */
-#define CONFIG_TI_SPI_MMAP
-#define CONFIG_QSPI_QUAD_SUPPORT
-
 #endif /* __CONFIG_AM57XX_EVM_H */
index ffe4a44c869adb77b35bdc36227b760dd17f8194..e4e37e5bbbf3f7844b705ee6c00a15d1965f68f6 100644 (file)
@@ -53,9 +53,6 @@
 #define CONFIG_USB_XHCI_OMAP
 #define CONFIG_AM437X_USB2PHY2_HOST
 
-/* SPI Flash support */
-#define CONFIG_TI_SPI_MMAP
-
 /* Power */
 #define CONFIG_POWER
 #define CONFIG_POWER_I2C
index 7441f4a69dea100ace1f2f2cfaf3ae764cb7c33e..f6be6595fe3c1ae781b955921157c90517d0192d 100644 (file)
 #define CONFIG_NET_RETRY_COUNT         10
 #define CONFIG_PHY_TI
 
-/* SPI */
-#define CONFIG_TI_SPI_MMAP
-#define CONFIG_QSPI_QUAD_SUPPORT
-
 /*
  * Default to using SPI for environment, etc.
  * 0x000000 - 0x040000 : QSPI.SPL (256KiB)
@@ -98,7 +94,6 @@
 #endif
 
 /* SPI SPL */
-#define CONFIG_TI_EDMA3
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x40000
 
 #define CONFIG_SUPPORT_EMMC_BOOT
index fa98efc24c0be17ea60047e74b9ebf85a8dd0421..a5b1600c33b605d83d76cb8236975fe0c293ff4e 100644 (file)
@@ -1555,8 +1555,6 @@ CONFIG_QE
 CONFIG_QEMU_MIPS
 CONFIG_QIXIS_I2C_ACCESS
 CONFIG_QSPI
-CONFIG_QSPI_QUAD_SUPPORT
-CONFIG_QSPI_SEL_GPIO
 CONFIG_QUOTA
 CONFIG_R7780MP
 CONFIG_R8A66597_BASE_ADDR
@@ -4400,7 +4398,6 @@ CONFIG_THUNDERX
 CONFIG_TIMESTAMP
 CONFIG_TIZEN
 CONFIG_TI_KSNAV
-CONFIG_TI_SPI_MMAP
 CONFIG_TMU_TIMER
 CONFIG_TPL_PAD_TO
 CONFIG_TPM_TIS_BASE_ADDRESS