ARM: imx6: DHCOM i.MX6 PDK: spl: Add eMMC initialization to SPL code

In order for 'bmode emmc' to work, the eMMC needs to be initialized in the
SPL. This change initializes the eMMC as BOOT_DEVICE_MMC1 (index=0).

Signed-off-by: Claudius Heine <ch@denx.de>

diff --git a/board/dhelectronics/dh_imx6/dh_imx6_spl.c b/board/dhelectronics/dh_imx6/dh_imx6_spl.c
index 1b7acc8df7eb94f7a241661ba3c10652fdb6972f..f2c3ac3e281c5243cd202709c54890050dd4cab4 100644 (file)
--- a/board/dhelectronics/dh_imx6/dh_imx6_spl.c
+++ b/board/dhelectronics/dh_imx6/dh_imx6_spl.c
@@ -476,6 +476,32 @@ static void setup_iomux_uart(void)
        SETUP_IOMUX_PADS(uart1_pads);
 }
 
+#ifdef CONFIG_FSL_USDHC
+struct fsl_esdhc_cfg usdhc_cfg[1] = {
+       {USDHC4_BASE_ADDR},
+};
+
+int board_mmc_get_env_dev(int devno)
+{
+       return devno - 1;
+}
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+       return 1; /* eMMC/uSDHC4 is always present */
+}
+
+int board_mmc_init(bd_t *bis)
+{
+       SETUP_IOMUX_PADS(usdhc4_pads);
+       usdhc_cfg[0].esdhc_base = USDHC4_BASE_ADDR;
+       usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
+       usdhc_cfg[0].max_bus_width = 8;
+
+       return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
+}
+#endif
+
 /* USB */
 static iomux_v3_cfg_t const usb_pads[] = {
        IOMUX_PADS(PAD_GPIO_1__USB_OTG_ID       | MUX_PAD_CTRL(NO_PAD_CTRL)),