imx: Fix potential lmb memory overwritten by stack

At default, u-boot reserves the memory from SP - 4KB to DRAM end for
lmb in arch_lmb_reserve. So lmb won't allocate any memory from it.
But we found the 4K gap for SP is not enough now, because some FDT
updating operations are added in our u-boot before jumping to kernel,
which needs larger stack. This causes the lmb allocated memory is overwritten
by stack.

Fix the issue by implementing the board_lmb_reserve to reserve from
SP - 16KB to memory end for lmb.

Signed-off-by: Ye Li <ye.li@nxp.com>

diff --git a/arch/arm/mach-imx/misc.c b/arch/arm/mach-imx/misc.c
index 1bb8c508de1da106fea1587836b2f5aece143892..31e95a9a28899a3e7ff7e7df733940cf9fc8ee6b 100644 (file)
--- a/arch/arm/mach-imx/misc.c
+++ b/arch/arm/mach-imx/misc.c
@@ -9,6 +9,8 @@
 #include <asm/io.h>
 #include <asm/mach-imx/regs-common.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* 1 second delay should be plenty of time for block reset. */
 #define        RESET_MAX_TIMEOUT       1000000
 
@@ -71,3 +73,33 @@ int mxs_reset_block(struct mxs_register_32 *reg)
 
        return 0;
 }
+
+static ulong get_sp(void)
+{
+       ulong ret;
+
+       asm("mov %0, sp" : "=r"(ret) : );
+       return ret;
+}
+
+void board_lmb_reserve(struct lmb *lmb)
+{
+       ulong sp, bank_end;
+       int bank;
+
+       sp = get_sp();
+       debug("## Current stack ends at 0x%08lx ", sp);
+
+       /* adjust sp by 16K to be safe */
+       sp -= 4096 << 2;
+       for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) {
+               if (sp < gd->bd->bi_dram[bank].start)
+                       continue;
+               bank_end = gd->bd->bi_dram[bank].start +
+                       gd->bd->bi_dram[bank].size;
+               if (sp >= bank_end)
+                       continue;
+               lmb_reserve(lmb, sp, bank_end - sp);
+               break;
+       }
+}