dtb-$(CONFIG_ARCH_KIRKWOOD) += \
kirkwood-atl-sbx81lifkw.dtb \
- kirkwood-atl-sbx81lifxcat.dtb \
- kirkwood-blackarmor-nas220.dtb \
- kirkwood-d2net.dtb \
- kirkwood-dns325.dtb \
- kirkwood-dockstar.dtb \
- kirkwood-dreamplug.dtb \
- kirkwood-ds109.dtb \
- kirkwood-goflexnet.dtb \
- kirkwood-guruplug-server-plus.dtb \
- kirkwood-ib62x0.dtb \
- kirkwood-iconnect.dtb \
- kirkwood-is2.dtb \
- kirkwood-lsxhl.dtb \
- kirkwood-lschlv2.dtb \
- kirkwood-net2big.dtb \
- kirkwood-ns2.dtb \
- kirkwood-ns2lite.dtb \
- kirkwood-ns2max.dtb \
- kirkwood-ns2mini.dtb \
- kirkwood-nsa310s.dtb \
- kirkwood-nsa325.dtb \
- kirkwood-openrd-base.dtb \
- kirkwood-openrd-client.dtb \
- kirkwood-openrd-ultimate.dtb \
- kirkwood-pogo_e02.dtb \
- kirkwood-pogoplug-series-4.dtb \
- kirkwood-sheevaplug.dtb
+ kirkwood-atl-sbx81lifxcat.dtb
dtb-$(CONFIG_MACH_S900) += \
bubblegum_96.dtb
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/ {
- mbus@f1000000 {
- pciec: pcie@82000000 {
- compatible = "marvell,kirkwood-pcie";
- status = "disabled";
- device_type = "pci";
-
- #address-cells = <3>;
- #size-cells = <2>;
-
- bus-range = <0x00 0xff>;
-
- ranges =
- <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
- 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
- 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>;
-
- pcie0: pcie@1,0 {
- device_type = "pci";
- assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
- reg = <0x0800 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
- 0x81000000 0 0 0x81000000 0x1 0 1 0>;
- bus-range = <0x00 0xff>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &intc 9>;
- marvell,pcie-port = <0>;
- marvell,pcie-lane = <0>;
- clocks = <&gate_clk 2>;
- status = "disabled";
- };
- };
- };
-
- ocp@f1000000 {
- pinctrl: pin-controller@10000 {
- compatible = "marvell,88f6192-pinctrl";
-
- pmx_sata0: pmx-sata0 {
- marvell,pins = "mpp5", "mpp21", "mpp23";
- marvell,function = "sata0";
- };
- pmx_sata1: pmx-sata1 {
- marvell,pins = "mpp4", "mpp20", "mpp22";
- marvell,function = "sata1";
- };
- pmx_sdio: pmx-sdio {
- marvell,pins = "mpp12", "mpp13", "mpp14",
- "mpp15", "mpp16", "mpp17";
- marvell,function = "sdio";
- };
- };
-
- rtc: rtc@10300 {
- compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
- reg = <0x10300 0x20>;
- interrupts = <53>;
- clocks = <&gate_clk 7>;
- };
-
- sata: sata@80000 {
- compatible = "marvell,orion-sata";
- reg = <0x80000 0x5000>;
- interrupts = <21>;
- clocks = <&gate_clk 14>, <&gate_clk 15>;
- clock-names = "0", "1";
- phys = <&sata_phy0>, <&sata_phy1>;
- phy-names = "port0", "port1";
- status = "disabled";
- };
-
- sdio: mvsdio@90000 {
- compatible = "marvell,orion-sdio";
- reg = <0x90000 0x200>;
- interrupts = <28>;
- clocks = <&gate_clk 4>;
- bus-width = <4>;
- cap-sdio-irq;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- status = "disabled";
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/ {
- mbus@f1000000 {
- pciec: pcie@82000000 {
- compatible = "marvell,kirkwood-pcie";
- status = "disabled";
- device_type = "pci";
-
- #address-cells = <3>;
- #size-cells = <2>;
-
- bus-range = <0x00 0xff>;
-
- ranges =
- <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
- 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
- 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>;
-
- pcie0: pcie@1,0 {
- device_type = "pci";
- assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
- reg = <0x0800 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
- 0x81000000 0 0 0x81000000 0x1 0 1 0>;
- bus-range = <0x00 0xff>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &intc 9>;
- marvell,pcie-port = <0>;
- marvell,pcie-lane = <0>;
- clocks = <&gate_clk 2>;
- status = "disabled";
- };
- };
- };
-
- ocp@f1000000 {
- pinctrl: pin-controller@10000 {
- compatible = "marvell,88f6281-pinctrl";
-
- pmx_sata0: pmx-sata0 {
- marvell,pins = "mpp5", "mpp21", "mpp23";
- marvell,function = "sata0";
- };
- pmx_sata1: pmx-sata1 {
- marvell,pins = "mpp4", "mpp20", "mpp22";
- marvell,function = "sata1";
- };
- pmx_sdio: pmx-sdio {
- marvell,pins = "mpp12", "mpp13", "mpp14",
- "mpp15", "mpp16", "mpp17";
- marvell,function = "sdio";
- };
- };
-
- rtc: rtc@10300 {
- compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
- reg = <0x10300 0x20>;
- interrupts = <53>;
- clocks = <&gate_clk 7>;
- };
-
- sata: sata@80000 {
- compatible = "marvell,orion-sata";
- reg = <0x80000 0x5000>;
- interrupts = <21>;
- clocks = <&gate_clk 14>, <&gate_clk 15>;
- clock-names = "0", "1";
- phys = <&sata_phy0>, <&sata_phy1>;
- phy-names = "port0", "port1";
- status = "disabled";
- };
-
- sdio: mvsdio@90000 {
- compatible = "marvell,orion-sdio";
- reg = <0x90000 0x200>;
- interrupts = <28>;
- clocks = <&gate_clk 4>;
- pinctrl-0 = <&pmx_sdio>;
- pinctrl-names = "default";
- bus-width = <4>;
- cap-sdio-irq;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- status = "disabled";
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/ {
- mbus@f1000000 {
- pciec: pcie@82000000 {
- compatible = "marvell,kirkwood-pcie";
- status = "disabled";
- device_type = "pci";
-
- #address-cells = <3>;
- #size-cells = <2>;
-
- bus-range = <0x00 0xff>;
-
- ranges =
- <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
- 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
- 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
- 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
- 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
- 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1.0 MEM */
- 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1.0 IO */>;
-
- pcie0: pcie@1,0 {
- device_type = "pci";
- assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
- reg = <0x0800 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
- 0x81000000 0 0 0x81000000 0x1 0 1 0>;
- bus-range = <0x00 0xff>;
- interrupt-names = "intx", "error";
- interrupts = <9>, <44>;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie0_intc 0>,
- <0 0 0 2 &pcie0_intc 1>,
- <0 0 0 3 &pcie0_intc 2>,
- <0 0 0 4 &pcie0_intc 3>;
- marvell,pcie-port = <0>;
- marvell,pcie-lane = <0>;
- clocks = <&gate_clk 2>;
- status = "disabled";
-
- pcie0_intc: interrupt-controller {
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
-
- pcie1: pcie@2,0 {
- device_type = "pci";
- assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>;
- reg = <0x1000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
- 0x81000000 0 0 0x81000000 0x2 0 1 0>;
- bus-range = <0x00 0xff>;
- interrupt-names = "intx", "error";
- interrupts = <10>, <45>;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie1_intc 0>,
- <0 0 0 2 &pcie1_intc 1>,
- <0 0 0 3 &pcie1_intc 2>,
- <0 0 0 4 &pcie1_intc 3>;
- marvell,pcie-port = <1>;
- marvell,pcie-lane = <0>;
- clocks = <&gate_clk 18>;
- status = "disabled";
-
- pcie1_intc: interrupt-controller {
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
- };
- };
- ocp@f1000000 {
-
- pinctrl: pin-controller@10000 {
- compatible = "marvell,88f6282-pinctrl";
-
- pmx_sata0: pmx-sata0 {
- marvell,pins = "mpp5", "mpp21", "mpp23";
- marvell,function = "sata0";
- };
- pmx_sata1: pmx-sata1 {
- marvell,pins = "mpp4", "mpp20", "mpp22";
- marvell,function = "sata1";
- };
-
- /*
- * Default I2C1 pinctrl setting on mpp36/mpp37,
- * overwrite marvell,pins on board level if required.
- */
- pmx_twsi1: pmx-twsi1 {
- marvell,pins = "mpp36", "mpp37";
- marvell,function = "twsi1";
- };
-
- pmx_sdio: pmx-sdio {
- marvell,pins = "mpp12", "mpp13", "mpp14",
- "mpp15", "mpp16", "mpp17";
- marvell,function = "sdio";
- };
- };
-
- thermal: thermal@10078 {
- compatible = "marvell,kirkwood-thermal";
- reg = <0x10078 0x4>;
- status = "okay";
- };
-
- rtc: rtc@10300 {
- compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
- reg = <0x10300 0x20>;
- interrupts = <53>;
- clocks = <&gate_clk 7>;
- };
-
- i2c1: i2c@11100 {
- compatible = "marvell,mv64xxx-i2c";
- reg = <0x11100 0x20>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <32>;
- clock-frequency = <100000>;
- clocks = <&gate_clk 7>;
- pinctrl-0 = <&pmx_twsi1>;
- pinctrl-names = "default";
- status = "disabled";
- };
-
- sata: sata@80000 {
- compatible = "marvell,orion-sata";
- reg = <0x80000 0x5000>;
- interrupts = <21>;
- clocks = <&gate_clk 14>, <&gate_clk 15>;
- clock-names = "0", "1";
- phys = <&sata_phy0>, <&sata_phy1>;
- phy-names = "port0", "port1";
- status = "disabled";
- };
-
- sdio: mvsdio@90000 {
- compatible = "marvell,orion-sdio";
- reg = <0x90000 0x200>;
- interrupts = <28>;
- clocks = <&gate_clk 4>;
- pinctrl-0 = <&pmx_sdio>;
- pinctrl-names = "default";
- bus-width = <4>;
- cap-sdio-irq;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- status = "disabled";
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/ {
- mbus@f1000000 {
- pciec: pcie@82000000 {
- compatible = "marvell,kirkwood-pcie";
- status = "disabled";
- device_type = "pci";
-
- #address-cells = <3>;
- #size-cells = <2>;
-
- bus-range = <0x00 0xff>;
-
- ranges =
- <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
- 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
- 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>;
-
- pcie0: pcie@1,0 {
- device_type = "pci";
- assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
- reg = <0x0800 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
- 0x81000000 0 0 0x81000000 0x1 0 1 0>;
- bus-range = <0x00 0xff>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &intc 9>;
- marvell,pcie-port = <0>;
- marvell,pcie-lane = <0>;
- clocks = <&gate_clk 2>;
- status = "disabled";
- };
- };
- };
-
- ocp@f1000000 {
- pinctrl: pin-controller@10000 {
- compatible = "marvell,98dx4122-pinctrl";
-
- };
- };
-};
-
-&sata_phy0 {
- status = "disabled";
-};
-
-&sata_phy1 {
- status = "disabled";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Device Tree file for Seagate Blackarmor NAS220
- *
- * Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "kirkwood.dtsi"
-#include "kirkwood-6192.dtsi"
-
-/ {
- model = "Seagate Blackarmor NAS220";
- compatible = "seagate,blackarmor-nas220","marvell,kirkwood-88f6192",
- "marvell,kirkwood";
-
- memory { /* 128 MB */
- device_type = "memory";
- reg = <0x00000000 0x8000000>;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200n8";
- stdout-path = &uart0;
- };
-
- gpio_poweroff {
- compatible = "gpio-poweroff";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
-
- gpio_keys {
- compatible = "gpio-keys";
-
- reset {
- label = "Reset";
- linux,code = <KEY_POWER>;
- gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
- };
-
- button {
- label = "Power";
- linux,code = <KEY_SLEEP>;
- gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- blue-power {
- label = "nas220:blue:power";
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-on";
- };
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_power_sata0 &pmx_power_sata1>;
- pinctrl-names = "default";
-
- sata0_power: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "SATA0 Power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio0 24 GPIO_ACTIVE_LOW>;
- };
-
- sata1_power: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "SATA1 Power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio0 28 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-/*
- * Serial port routed to connector CN5
- *
- * pin 1 - TX (CPU's TX)
- * pin 4 - RX (CPU's RX)
- * pin 6 - GND
- */
-&uart0 {
- status = "okay";
-};
-
-&pinctrl {
- pinctrl-0 = <&pmx_button_reset &pmx_button_power>;
- pinctrl-names = "default";
-
- pmx_act_sata0: pmx-act-sata0 {
- marvell,pins = "mpp15";
- marvell,function = "sata0";
- };
-
- pmx_act_sata1: pmx-act-sata1 {
- marvell,pins = "mpp16";
- marvell,function = "sata1";
- };
-
- pmx_power_sata0: pmx-power-sata0 {
- marvell,pins = "mpp24";
- marvell,function = "gpio";
- };
-
- pmx_power_sata1: pmx-power-sata1 {
- marvell,pins = "mpp28";
- marvell,function = "gpio";
- };
-
- pmx_button_reset: pmx-button-reset {
- marvell,pins = "mpp29";
- marvell,function = "gpio";
- };
-
- pmx_button_power: pmx-button-power {
- marvell,pins = "mpp26";
- marvell,function = "gpio";
- };
-};
-
-&sata {
- status = "okay";
- nr-ports = <2>;
-};
-
-&i2c0 {
- status = "okay";
-
- adt7476: thermal@2e {
- compatible = "adi,adt7476";
- reg = <0x2e>;
- };
-};
-
-&nand {
- status = "okay";
-};
-
-&mdio {
- status = "okay";
-
- ethphy0: ethernet-phy@8 {
- reg = <8>;
- };
-};
-
-ð0 {
- status = "okay";
-
- ethernet0-port@0 {
- phy-handle = <ðphy0>;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree file for d2 Network v2
- *
- * Copyright (C) 2014 Simon Guinot <simon.guinot@sequanux.org>
- *
-*/
-
-/dts-v1/;
-
-#include <dt-bindings/leds/leds-ns2.h>
-#include "kirkwood-netxbig.dtsi"
-
-/ {
- model = "LaCie d2 Network v2";
- compatible = "lacie,d2net_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x10000000>;
- };
-
- ns2-leds {
- compatible = "lacie,ns2-leds";
-
- blue-sata {
- label = "d2net_v2:blue:sata";
- slow-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
- cmd-gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
- modes-map = <NS_V2_LED_OFF 1 0
- NS_V2_LED_ON 0 1
- NS_V2_LED_ON 1 1
- NS_V2_LED_SATA 0 0>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- red-fail {
- label = "d2net_v2:red:fail";
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "kirkwood-dnskw.dtsi"
-
-/ {
- model = "D-Link DNS-325 NAS (Rev A1)";
- compatible = "dlink,dns-325-a1", "dlink,dns-325", "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x10000000>;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200n8 earlyprintk";
- stdout-path = &uart0;
- };
-
- gpio-leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&pmx_led_power &pmx_led_red_usb_325
- &pmx_led_red_left_hdd &pmx_led_red_right_hdd
- &pmx_led_white_usb>;
- pinctrl-names = "default";
-
- white-power {
- label = "dns325:white:power";
- gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
- white-usb {
- label = "dns325:white:usb";
- gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; /* GPIO 43 */
- };
- red-l_hdd {
- label = "dns325:red:l_hdd";
- gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
- };
- red-r_hdd {
- label = "dns325:red:r_hdd";
- gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
- };
- red-usb {
- label = "dns325:red:usb";
- gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
- };
- };
-
- ocp@f1000000 {
- i2c@11000 {
- status = "okay";
-
- lm75: lm75@48 {
- compatible = "national,lm75";
- reg = <0x48>;
- };
- };
- serial@12000 {
- status = "okay";
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
- model = "D-Link DNS NASes (kirkwood-based)";
- compatible = "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
- gpio_keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_button_power &pmx_button_unmount
- &pmx_button_reset>;
- pinctrl-names = "default";
-
- power {
- label = "Power button";
- linux,code = <KEY_POWER>;
- gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
- };
- eject {
- label = "USB unmount button";
- linux,code = <KEY_EJECTCD>;
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- };
- reset {
- label = "Reset button";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio_fan {
- /* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */
- compatible = "gpio-fan";
- pinctrl-0 = <&pmx_fan_high_speed &pmx_fan_low_speed>;
- pinctrl-names = "default";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW
- &gpio1 13 GPIO_ACTIVE_LOW>;
- gpio-fan,speed-map = <0 0
- 3000 1
- 6000 2>;
- };
-
- gpio_poweroff {
- compatible = "gpio-poweroff";
- pinctrl-0 = <&pmx_power_off>;
- pinctrl-names = "default";
- gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
- };
-
- ocp@f1000000 {
- pinctrl: pin-controller@10000 {
-
- pinctrl-0 = <&pmx_power_back_on &pmx_present_sata0
- &pmx_present_sata1 &pmx_fan_tacho
- &pmx_temp_alarm>;
- pinctrl-names = "default";
-
- pmx_sata0: pmx-sata0 {
- marvell,pins = "mpp20";
- marvell,function = "sata1";
- };
- pmx_sata1: pmx-sata1 {
- marvell,pins = "mpp21";
- marvell,function = "sata0";
- };
- pmx_led_power: pmx-led-power {
- marvell,pins = "mpp26";
- marvell,function = "gpio";
- };
- pmx_led_red_right_hdd: pmx-led-red-right-hdd {
- marvell,pins = "mpp27";
- marvell,function = "gpio";
- };
- pmx_led_red_left_hdd: pmx-led-red-left-hdd {
- marvell,pins = "mpp28";
- marvell,function = "gpio";
- };
- pmx_led_red_usb_325: pmx-led-red-usb-325 {
- marvell,pins = "mpp29";
- marvell,function = "gpio";
- };
- pmx_button_power: pmx-button-power {
- marvell,pins = "mpp34";
- marvell,function = "gpio";
- };
- pmx_led_red_usb_320: pmx-led-red-usb-320 {
- marvell,pins = "mpp35";
- marvell,function = "gpio";
- };
- pmx_power_off: pmx-power-off {
- marvell,pins = "mpp36";
- marvell,function = "gpio";
- };
- pmx_power_back_on: pmx-power-back-on {
- marvell,pins = "mpp37";
- marvell,function = "gpio";
- };
- pmx_power_sata0: pmx-power-sata0 {
- marvell,pins = "mpp39";
- marvell,function = "gpio";
- };
- pmx_power_sata1: pmx-power-sata1 {
- marvell,pins = "mpp40";
- marvell,function = "gpio";
- };
- pmx_present_sata0: pmx-present-sata0 {
- marvell,pins = "mpp41";
- marvell,function = "gpio";
- };
- pmx_present_sata1: pmx-present-sata1 {
- marvell,pins = "mpp42";
- marvell,function = "gpio";
- };
- pmx_led_white_usb: pmx-led-white-usb {
- marvell,pins = "mpp43";
- marvell,function = "gpio";
- };
- pmx_fan_tacho: pmx-fan-tacho {
- marvell,pins = "mpp44";
- marvell,function = "gpio";
- };
- pmx_fan_high_speed: pmx-fan-high-speed {
- marvell,pins = "mpp45";
- marvell,function = "gpio";
- };
- pmx_fan_low_speed: pmx-fan-low-speed {
- marvell,pins = "mpp46";
- marvell,function = "gpio";
- };
- pmx_button_unmount: pmx-button-unmount {
- marvell,pins = "mpp47";
- marvell,function = "gpio";
- };
- pmx_button_reset: pmx-button-reset {
- marvell,pins = "mpp48";
- marvell,function = "gpio";
- };
- pmx_temp_alarm: pmx-temp-alarm {
- marvell,pins = "mpp49";
- marvell,function = "gpio";
- };
- };
- sata@80000 {
- pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
- pinctrl-names = "default";
- status = "okay";
- nr-ports = <2>;
- };
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_power_sata0 &pmx_power_sata1>;
- pinctrl-names = "default";
-
- sata0_power: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "SATA0 Power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio1 7 0>;
- };
- sata1_power: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "SATA1 Power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio1 8 0>;
- };
- };
-};
-
-&nand {
- status = "okay";
- chip-delay = <35>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0000000 0x100000>;
- read-only;
- };
-
- partition@100000 {
- label = "uImage";
- reg = <0x0100000 0x500000>;
- };
-
- partition@600000 {
- label = "ramdisk";
- reg = <0x0600000 0x500000>;
- };
-
- partition@b00000 {
- label = "image";
- reg = <0x0b00000 0x6600000>;
- };
-
- partition@7100000 {
- label = "mini firmware";
- reg = <0x7100000 0xa00000>;
- };
-
- partition@7b00000 {
- label = "config";
- reg = <0x7b00000 0x500000>;
- };
-};
-
-&mdio {
- status = "okay";
-
- ethphy0: ethernet-phy@8 {
- reg = <8>;
- };
-};
-
-ð0 {
- status = "okay";
- ethernet0-port@0 {
- phy-handle = <ðphy0>;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
- model = "Seagate FreeAgent Dockstar";
- compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x8000000>;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
- stdout-path = &uart0;
- };
-
- ocp@f1000000 {
- pinctrl: pin-controller@10000 {
- pmx_usb_power_enable: pmx-usb-power-enable {
- marvell,pins = "mpp29";
- marvell,function = "gpio";
- };
- pmx_led_green: pmx-led-green {
- marvell,pins = "mpp46";
- marvell,function = "gpio";
- };
- pmx_led_orange: pmx-led-orange {
- marvell,pins = "mpp47";
- marvell,function = "gpio";
- };
- };
- serial@12000 {
- status = "ok";
- };
- };
- gpio-leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&pmx_led_green &pmx_led_orange>;
- pinctrl-names = "default";
-
- health {
- label = "status:green:health";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
- fault {
- label = "status:orange:fault";
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- };
- };
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_usb_power_enable>;
- pinctrl-names = "default";
-
- usb_power: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "USB Power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio0 29 0>;
- };
- };
-};
-
-&nand {
- status = "okay";
-
- partition@0 {
- label = "u-boot";
- reg = <0x0000000 0x100000>;
- read-only;
- };
-
- partition@100000 {
- label = "uImage";
- reg = <0x0100000 0x400000>;
- };
-
- partition@500000 {
- label = "data";
- reg = <0x0500000 0xfb00000>;
- };
-};
-
-&mdio {
- status = "okay";
-
- ethphy0: ethernet-phy@0 {
- compatible = "marvell,88e1116";
- reg = <0>;
- };
-};
-
-ð0 {
- status = "okay";
- ethernet0-port@0 {
- phy-handle = <ðphy0>;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
- model = "Globalscale Technologies Dreamplug";
- compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x20000000>;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200n8 earlyprintk";
- stdout-path = &uart0;
- };
-
- aliases {
- spi0 = &spi0;
- };
-
- ocp@f1000000 {
- pinctrl: pin-controller@10000 {
- pmx_led_bluetooth: pmx-led-bluetooth {
- marvell,pins = "mpp47";
- marvell,function = "gpio";
- };
- pmx_led_wifi: pmx-led-wifi {
- marvell,pins = "mpp48";
- marvell,function = "gpio";
- };
- pmx_led_wifi_ap: pmx-led-wifi-ap {
- marvell,pins = "mpp49";
- marvell,function = "gpio";
- };
- };
- serial@12000 {
- status = "ok";
- };
-
- spi@10600 {
- status = "okay";
-
- m25p40@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <50000000>;
- mode = <0>;
-
- partition@0 {
- reg = <0x0 0x80000>;
- label = "u-boot";
- };
-
- partition@100000 {
- reg = <0x100000 0x10000>;
- label = "u-boot env";
- };
-
- partition@180000 {
- reg = <0x180000 0x10000>;
- label = "dtb";
- };
- };
- };
-
- sata@80000 {
- status = "okay";
- nr-ports = <1>;
- };
-
- mvsdio@90000 {
- pinctrl-0 = <&pmx_sdio>;
- pinctrl-names = "default";
- status = "okay";
- /* No CD or WP GPIOs */
- broken-cd;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&pmx_led_bluetooth &pmx_led_wifi
- &pmx_led_wifi_ap >;
- pinctrl-names = "default";
-
- bluetooth {
- label = "dreamplug:blue:bluetooth";
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- };
- wifi {
- label = "dreamplug:green:wifi";
- gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
- };
- wifi-ap {
- label = "dreamplug:green:wifi_ap";
- gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&mdio {
- status = "okay";
-
- ethphy0: ethernet-phy@0 {
- reg = <0>;
- };
-
- ethphy1: ethernet-phy@1 {
- reg = <1>;
- };
-};
-
-ð0 {
- status = "okay";
- ethernet0-port@0 {
- phy-handle = <ðphy0>;
- };
-};
-
-ð1 {
- status = "okay";
- ethernet1-port@0 {
- phy-handle = <ðphy1>;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
- model = "Synology DS109, DS110, DS110jv20";
- compatible = "synology,ds109", "synology,ds110jv20",
- "synology,ds110", "marvell,kirkwood";
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x8000000>;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200n8";
- stdout-path = &uart0;
- };
-
- gpio-fan-150-32-35 {
- status = "okay";
- };
-
- gpio-leds-hdd-21-1 {
- status = "okay";
- };
-};
-
-&rs5c372 {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
- model = "Seagate GoFlex Net";
- compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x8000000>;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
- stdout-path = &uart0;
- };
-
- ocp@f1000000 {
- pinctrl: pin-controller@10000 {
- pmx_usb_power_enable: pmx-usb-power-enable {
- marvell,pins = "mpp29";
- marvell,function = "gpio";
- };
- pmx_led_right_cap_0: pmx-led_right_cap_0 {
- marvell,pins = "mpp38";
- marvell,function = "gpio";
- };
- pmx_led_right_cap_1: pmx-led_right_cap_1 {
- marvell,pins = "mpp39";
- marvell,function = "gpio";
- };
- pmx_led_right_cap_2: pmx-led_right_cap_2 {
- marvell,pins = "mpp40";
- marvell,function = "gpio";
- };
- pmx_led_right_cap_3: pmx-led_right_cap_3 {
- marvell,pins = "mpp41";
- marvell,function = "gpio";
- };
- pmx_led_left_cap_0: pmx-led_left_cap_0 {
- marvell,pins = "mpp42";
- marvell,function = "gpio";
- };
- pmx_led_left_cap_1: pmx-led_left_cap_1 {
- marvell,pins = "mpp43";
- marvell,function = "gpio";
- };
- pmx_led_left_cap_2: pmx-led_left_cap_2 {
- marvell,pins = "mpp44";
- marvell,function = "gpio";
- };
- pmx_led_left_cap_3: pmx-led_left_cap_3 {
- marvell,pins = "mpp45";
- marvell,function = "gpio";
- };
- pmx_led_green: pmx-led_green {
- marvell,pins = "mpp46";
- marvell,function = "gpio";
- };
- pmx_led_orange: pmx-led_orange {
- marvell,pins = "mpp47";
- marvell,function = "gpio";
- };
- };
- serial@12000 {
- status = "ok";
- };
-
- sata@80000 {
- status = "okay";
- nr-ports = <2>;
- };
-
- };
- gpio-leds {
- compatible = "gpio-leds";
- pinctrl-0 = < &pmx_led_orange
- &pmx_led_left_cap_0 &pmx_led_left_cap_1
- &pmx_led_left_cap_2 &pmx_led_left_cap_3
- &pmx_led_right_cap_0 &pmx_led_right_cap_1
- &pmx_led_right_cap_2 &pmx_led_right_cap_3
- >;
- pinctrl-names = "default";
-
- health {
- label = "status:green:health";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
- fault {
- label = "status:orange:fault";
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- };
- left0 {
- label = "status:white:left0";
- gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
- };
- left1 {
- label = "status:white:left1";
- gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
- };
- left2 {
- label = "status:white:left2";
- gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
- };
- left3 {
- label = "status:white:left3";
- gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
- };
- right0 {
- label = "status:white:right0";
- gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
- };
- right1 {
- label = "status:white:right1";
- gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
- };
- right2 {
- label = "status:white:right2";
- gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
- };
- right3 {
- label = "status:white:right3";
- gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
- };
- };
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_usb_power_enable>;
- pinctrl-names = "default";
-
- usb_power: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "USB Power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&nand {
- chip-delay = <40>;
- status = "okay";
-
- partition@0 {
- label = "u-boot";
- reg = <0x0000000 0x100000>;
- read-only;
- };
-
- partition@100000 {
- label = "uImage";
- reg = <0x0100000 0x400000>;
- };
-
- partition@500000 {
- label = "pogoplug";
- reg = <0x0500000 0x2000000>;
- };
-
- partition@2500000 {
- label = "root";
- reg = <0x02500000 0xd800000>;
- };
-};
-
-&mdio {
- status = "okay";
-
- ethphy0: ethernet-phy@0 {
- reg = <0>;
- };
-};
-
-ð0 {
- status = "okay";
- ethernet0-port@0 {
- phy-handle = <ðphy0>;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
- model = "Globalscale Technologies Guruplug Server Plus";
- compatible = "globalscale,guruplug-server-plus", "globalscale,guruplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x20000000>;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200n8 earlyprintk";
- stdout-path = &uart0;
- };
-
- ocp@f1000000 {
- pinctrl: pin-controller@10000 {
- pmx_led_health_r: pmx-led-health-r {
- marvell,pins = "mpp46";
- marvell,function = "gpio";
- };
- pmx_led_health_g: pmx-led-health-g {
- marvell,pins = "mpp47";
- marvell,function = "gpio";
- };
- pmx_led_wmode_r: pmx-led-wmode-r {
- marvell,pins = "mpp48";
- marvell,function = "gpio";
- };
- pmx_led_wmode_g: pmx-led-wmode-g {
- marvell,pins = "mpp49";
- marvell,function = "gpio";
- };
- };
- serial@12000 {
- status = "ok";
- };
-
- sata@80000 {
- status = "okay";
- nr-ports = <1>;
- };
-
- /* AzureWave AW-GH381 WiFi/BT */
- mvsdio@90000 {
- status = "okay";
- non-removable;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
- pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g
- &pmx_led_wmode_r &pmx_led_wmode_g >;
- pinctrl-names = "default";
-
- health-r {
- label = "guruplug:red:health";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- };
- health-g {
- label = "guruplug:green:health";
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- };
- wmode-r {
- label = "guruplug:red:wmode";
- gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
- };
- wmode-g {
- label = "guruplug:green:wmode";
- gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&nand {
- status = "okay";
-
- partition@0 {
- label = "u-boot";
- reg = <0x00000000 0x00100000>;
- read-only;
- };
-
- partition@100000 {
- label = "uImage";
- reg = <0x00100000 0x00400000>;
- };
-
- partition@500000 {
- label = "data";
- reg = <0x00500000 0x1fb00000>;
- };
-};
-
-&mdio {
- status = "okay";
-
- ethphy0: ethernet-phy@0 {
- /* Marvell 88E1121R */
- compatible = "ethernet-phy-id0141.0cb0",
- "ethernet-phy-ieee802.3-c22";
- reg = <0>;
- };
-
- ethphy1: ethernet-phy@1 {
- /* Marvell 88E1121R */
- compatible = "ethernet-phy-id0141.0cb0",
- "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- };
-};
-
-ð0 {
- status = "okay";
- ethernet0-port@0 {
- phy-handle = <ðphy0>;
- phy-connection-type = "rgmii-id";
- };
-};
-
-ð1 {
- status = "okay";
- ethernet1-port@0 {
- phy-handle = <ðphy1>;
- phy-connection-type = "rgmii-id";
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
- model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
- compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x10000000>;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200n8 earlyprintk";
- stdout-path = &uart0;
- };
-
- ocp@f1000000 {
- pinctrl: pin-controller@10000 {
- pmx_led_os_red: pmx-led-os-red {
- marvell,pins = "mpp22";
- marvell,function = "gpio";
- };
- pmx_power_off: pmx-power-off {
- marvell,pins = "mpp24";
- marvell,function = "gpio";
- };
- pmx_led_os_green: pmx-led-os-green {
- marvell,pins = "mpp25";
- marvell,function = "gpio";
- };
- pmx_led_usb_transfer: pmx-led-usb-transfer {
- marvell,pins = "mpp27";
- marvell,function = "gpio";
- };
- pmx_button_reset: pmx-button-reset {
- marvell,pins = "mpp28";
- marvell,function = "gpio";
- };
- pmx_button_usb_copy: pmx-button-usb-copy {
- marvell,pins = "mpp29";
- marvell,function = "gpio";
- };
- };
-
- serial@12000 {
- status = "okay";
- };
-
- sata@80000 {
- status = "okay";
- nr-ports = <2>;
- };
- };
-
- gpio_keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_button_reset &pmx_button_usb_copy>;
- pinctrl-names = "default";
-
- copy {
- label = "USB Copy";
- linux,code = <KEY_COPY>;
- gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
- };
- reset {
- label = "Reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&pmx_led_os_red &pmx_led_os_green
- &pmx_led_usb_transfer>;
- pinctrl-names = "default";
-
- green-os {
- label = "ib62x0:green:os";
- gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
- red-os {
- label = "ib62x0:red:os";
- gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
- };
- usb-copy {
- label = "ib62x0:red:usb_copy";
- gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
- };
- };
-
- gpio_poweroff {
- compatible = "gpio-poweroff";
- pinctrl-0 = <&pmx_power_off>;
- pinctrl-names = "default";
- gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
- };
-};
-
-&nand {
- status = "okay";
-
- partition@0 {
- label = "u-boot";
- reg = <0x0000000 0xe0000>;
- };
-
- partition@e0000 {
- label = "u-boot environment";
- reg = <0xe0000 0x20000>;
- };
-
- partition@100000 {
- label = "uImage";
- reg = <0x0100000 0x600000>;
- };
-
- partition@700000 {
- label = "root";
- reg = <0x0700000 0xf900000>;
- };
-
-};
-
-&mdio {
- status = "okay";
-
- ethphy0: ethernet-phy@8 {
- reg = <8>;
- };
-};
-
-ð0 {
- status = "okay";
-
- ethernet0-port@0 {
- phy-handle = <ðphy0>;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
- model = "Iomega Iconnect";
- compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x10000000>;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200n8 earlyprintk";
- stdout-path = &uart0;
- linux,initrd-start = <0x4500040>;
- linux,initrd-end = <0x4800000>;
- };
-
- ocp@f1000000 {
- pinctrl: pin-controller@10000 {
- pmx_button_reset: pmx-button-reset {
- marvell,pins = "mpp12";
- marvell,function = "gpio";
- };
- pmx_button_otb: pmx-button-otb {
- marvell,pins = "mpp35";
- marvell,function = "gpio";
- };
- pmx_led_level: pmx-led-level {
- marvell,pins = "mpp41";
- marvell,function = "gpio";
- };
- pmx_led_power_blue: pmx-led-power-blue {
- marvell,pins = "mpp42";
- marvell,function = "gpio";
- };
- pmx_led_power_red: pmx-power-red {
- marvell,pins = "mpp43";
- marvell,function = "gpio";
- };
- pmx_led_usb1: pmx-led-usb1 {
- marvell,pins = "mpp44";
- marvell,function = "gpio";
- };
- pmx_led_usb2: pmx-led-usb2 {
- marvell,pins = "mpp45";
- marvell,function = "gpio";
- };
- pmx_led_usb3: pmx-led-usb3 {
- marvell,pins = "mpp46";
- marvell,function = "gpio";
- };
- pmx_led_usb4: pmx-led-usb4 {
- marvell,pins = "mpp47";
- marvell,function = "gpio";
- };
- pmx_led_otb: pmx-led-otb {
- marvell,pins = "mpp48";
- marvell,function = "gpio";
- };
- };
- i2c@11000 {
- status = "okay";
-
- lm63: lm63@4c {
- compatible = "national,lm63";
- reg = <0x4c>;
- };
- };
- serial@12000 {
- status = "ok";
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
- pinctrl-0 = < &pmx_led_level &pmx_led_power_blue
- &pmx_led_power_red &pmx_led_usb1
- &pmx_led_usb2 &pmx_led_usb3
- &pmx_led_usb4 &pmx_led_otb >;
- pinctrl-names = "default";
-
- led-level {
- label = "led_level";
- gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
- power-blue {
- label = "power:blue";
- gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
- power-red {
- label = "power:red";
- gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
- };
- usb1 {
- label = "usb1:blue";
- gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
- };
- usb2 {
- label = "usb2:blue";
- gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
- };
- usb3 {
- label = "usb3:blue";
- gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
- };
- usb4 {
- label = "usb4:blue";
- gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
- };
- otb {
- label = "otb:blue";
- gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
- };
- };
-
- gpio_keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = < &pmx_button_reset &pmx_button_otb >;
- pinctrl-names = "default";
-
- otb {
- label = "OTB Button";
- linux,code = <KEY_COPY>;
- gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
- debounce-interval = <100>;
- };
- reset {
- label = "Reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- debounce-interval = <100>;
- };
- };
-};
-
-&nand {
- status = "okay";
-
- partition@0 {
- label = "uboot";
- reg = <0x0000000 0xc0000>;
- };
-
- partition@a0000 {
- label = "env";
- reg = <0xa0000 0x20000>;
- };
-
- partition@100000 {
- label = "zImage";
- reg = <0x100000 0x300000>;
- };
-
- partition@540000 {
- label = "initrd";
- reg = <0x540000 0x300000>;
- };
-
- partition@980000 {
- label = "boot";
- reg = <0x980000 0x1f400000>;
- };
-};
-
-&mdio {
- status = "okay";
-
- ethphy0: ethernet-phy@11 {
- reg = <11>;
- };
-};
-
-ð0 {
- status = "okay";
- ethernet0-port@0 {
- phy-handle = <ðphy0>;
- };
-};
-
-&pciec {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include <dt-bindings/leds/leds-ns2.h>
-#include "kirkwood-ns2-common.dtsi"
-
-/ {
- model = "LaCie Internet Space v2";
- compatible = "lacie,inetspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x8000000>;
- };
-
- ocp@f1000000 {
- sata@80000 {
- pinctrl-0 = <&pmx_ns2_sata0>;
- pinctrl-names = "default";
- status = "okay";
- nr-ports = <1>;
- };
- };
-
- ns2-leds {
- compatible = "lacie,ns2-leds";
-
- blue-sata {
- label = "ns2:blue:sata";
- slow-gpio = <&gpio0 29 0>;
- cmd-gpio = <&gpio0 30 0>;
- modes-map = <NS_V2_LED_OFF 1 0
- NS_V2_LED_ON 0 1
- NS_V2_LED_ON 1 1
- NS_V2_LED_SATA 0 0>;
- };
- };
-};
-
-ðphy0 { reg = <8>; };
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "kirkwood-lsxl.dtsi"
-
-/ {
- model = "Buffalo Linkstation LS-CHLv2";
- compatible = "buffalo,lschlv2", "buffalo,lsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x4000000>;
- };
-
- ocp@f1000000 {
- serial@12000 {
- status = "okay";
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "kirkwood-lsxl.dtsi"
-
-/ {
- model = "Buffalo Linkstation LS-XHL";
- compatible = "buffalo,lsxhl", "buffalo,lsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x10000000>;
- };
-
- ocp@f1000000 {
- serial@12000 {
- status = "okay";
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
- chosen {
- bootargs = "console=ttyS0,115200n8 earlyprintk";
- stdout-path = &uart0;
- };
-
- aliases {
- spi0 = &spi0;
- };
-
- ocp@f1000000 {
- pinctrl: pin-controller@10000 {
- pmx_power_hdd: pmx-power-hdd {
- marvell,pins = "mpp10";
- marvell,function = "gpo";
- };
- pmx_usb_vbus: pmx-usb-vbus {
- marvell,pins = "mpp11";
- marvell,function = "gpio";
- };
- pmx_fan_high: pmx-fan-high {
- marvell,pins = "mpp18";
- marvell,function = "gpo";
- };
- pmx_fan_low: pmx-fan-low {
- marvell,pins = "mpp19";
- marvell,function = "gpo";
- };
- pmx_led_function_blue: pmx-led-function-blue {
- marvell,pins = "mpp36";
- marvell,function = "gpio";
- };
- pmx_led_alarm: pmx-led-alarm {
- marvell,pins = "mpp37";
- marvell,function = "gpio";
- };
- pmx_led_info: pmx-led-info {
- marvell,pins = "mpp38";
- marvell,function = "gpio";
- };
- pmx_led_power: pmx-led-power {
- marvell,pins = "mpp39";
- marvell,function = "gpio";
- };
- pmx_fan_lock: pmx-fan-lock {
- marvell,pins = "mpp40";
- marvell,function = "gpio";
- };
- pmx_button_function: pmx-button-function {
- marvell,pins = "mpp41";
- marvell,function = "gpio";
- };
- pmx_power_switch: pmx-power-switch {
- marvell,pins = "mpp42";
- marvell,function = "gpio";
- };
- pmx_power_auto_switch: pmx-power-auto-switch {
- marvell,pins = "mpp43";
- marvell,function = "gpio";
- };
- pmx_led_function_red: pmx-led-function_red {
- marvell,pins = "mpp48";
- marvell,function = "gpio";
- };
-
- };
- sata@80000 {
- status = "okay";
- nr-ports = <1>;
- };
-
- spi@10600 {
- status = "okay";
-
- m25p40@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "m25p40", "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
- mode = <0>;
-
- partition@0 {
- reg = <0x0 0x60000>;
- label = "uboot";
- read-only;
- };
-
- partition@60000 {
- reg = <0x60000 0x10000>;
- label = "dtb";
- read-only;
- };
-
- partition@70000 {
- reg = <0x70000 0x10000>;
- label = "uboot_env";
- };
- };
- };
- };
-
- gpio_keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_button_function &pmx_power_switch
- &pmx_power_auto_switch>;
- pinctrl-names = "default";
-
- option {
- label = "Function Button";
- linux,code = <KEY_OPTION>;
- gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
- };
- reserved {
- label = "Power-on Switch";
- linux,code = <KEY_RESERVED>;
- linux,input-type = <5>;
- gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
- };
- power {
- label = "Power-auto Switch";
- linux,code = <KEY_ESC>;
- linux,input-type = <5>;
- gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio_leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
- &pmx_led_info &pmx_led_power
- &pmx_led_function_blue>;
- pinctrl-names = "default";
-
- func_blue {
- label = "lsxl:blue:func";
- gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
- };
-
- alarm {
- label = "lsxl:red:alarm";
- gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
- };
-
- info {
- label = "lsxl:amber:info";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- };
-
- power {
- label = "lsxl:blue:power";
- gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
-
- func_red {
- label = "lsxl:red:func";
- gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio_fan {
- compatible = "gpio-fan";
- pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
- pinctrl-names = "default";
- gpios = <&gpio0 19 GPIO_ACTIVE_LOW
- &gpio0 18 GPIO_ACTIVE_LOW>;
- gpio-fan,speed-map = <0 3
- 1500 2
- 3250 1
- 5000 0>;
- alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
- };
-
- restart_poweroff {
- compatible = "restart-poweroff";
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_power_hdd &pmx_usb_vbus>;
- pinctrl-names = "default";
-
- usb_power: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "USB Power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio0 11 0>;
- };
- hdd_power: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "HDD Power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio0 10 0>;
- };
- };
-};
-
-&mdio {
- status = "okay";
-
- ethphy0: ethernet-phy@0 {
- reg = <0>;
- };
-
- ethphy1: ethernet-phy@8 {
- reg = <8>;
- };
-};
-
-ð0 {
- status = "okay";
- ethernet0-port@0 {
- phy-handle = <ðphy0>;
- };
-};
-
-ð1 {
- status = "okay";
- ethernet1-port@0 {
- phy-handle = <ðphy1>;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree file for LaCie 2Big Network v2
- *
- * Copyright (C) 2014
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * Based on netxbig_v2-setup.c,
- * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
- *
-*/
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-netxbig.dtsi"
-
-/ {
- model = "LaCie 2Big Network v2";
- compatible = "lacie,net2big_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x10000000>;
- };
-
- fan {
- compatible = "gpio-fan";
- alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
- };
-};
-
-®ulators {
- regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "hdd1power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
- };
-
- clocks {
- g762_clk: g762-oscillator {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
- };
-};
-
-&i2c0 {
- g762@3e {
- compatible = "gmt,g762";
- reg = <0x3e>;
- clocks = <&g762_clk>;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree common file for LaCie 2Big and 5Big Network v2
- *
- * Copyright (C) 2014
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * Based on netxbig_v2-setup.c,
- * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
- *
-*/
-
-#include <dt-bindings/leds/leds-netxbig.h>
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
- chosen {
- bootargs = "console=ttyS0,115200n8";
- stdout-path = &uart0;
- };
-
- ocp@f1000000 {
- serial@12000 {
- status = "okay";
- };
-
- spi@10600 {
- status = "okay";
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "mxicy,mx25l4005a", "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <20000000>;
- mode = <0>;
-
- partition@0 {
- reg = <0x0 0x80000>;
- label = "u-boot";
- };
- };
- };
-
- sata@80000 {
- status = "okay";
- nr-ports = <2>;
- };
-
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
-
- /*
- * esc and power represent a three position rocker
- * switch. Thus the conventional KEY_POWER does not fit
- */
- exc {
- label = "Back power switch (on|auto)";
- linux,code = <KEY_ESC>;
- linux,input-type = <5>;
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- };
- power {
- label = "Back power switch (auto|off)";
- linux,code = <KEY_1>;
- linux,input-type = <5>;
- gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
- };
- option {
- label = "Function button";
- linux,code = <KEY_OPTION>;
- gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
- };
-
- };
-
- gpio-poweroff {
- compatible = "gpio-poweroff";
- gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
- };
-
- regulators: regulators {
- status = "okay";
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
-
- regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "hdd0power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
- };
- };
-
- netxbig_gpio_ext: netxbig-gpio-ext {
- compatible = "lacie,netxbig-gpio-ext";
-
- addr-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH
- &gpio1 16 GPIO_ACTIVE_HIGH
- &gpio1 17 GPIO_ACTIVE_HIGH>;
- data-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH
- &gpio1 13 GPIO_ACTIVE_HIGH
- &gpio1 14 GPIO_ACTIVE_HIGH>;
- enable-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
- };
-
- netxbig-leds {
- compatible = "lacie,netxbig-leds";
-
- gpio-ext = <&netxbig_gpio_ext>;
-
- timers = <NETXBIG_LED_TIMER1 500 500
- NETXBIG_LED_TIMER2 500 1000>;
-
- blue-power {
- label = "netxbig:blue:power";
- mode-addr = <0>;
- mode-val = <NETXBIG_LED_OFF 0
- NETXBIG_LED_ON 1
- NETXBIG_LED_TIMER1 3
- NETXBIG_LED_TIMER2 7>;
- bright-addr = <1>;
- max-brightness = <7>;
- };
- red-power {
- label = "netxbig:red:power";
- mode-addr = <0>;
- mode-val = <NETXBIG_LED_OFF 0
- NETXBIG_LED_ON 2
- NETXBIG_LED_TIMER1 4>;
- bright-addr = <1>;
- max-brightness = <7>;
- };
- blue-sata0 {
- label = "netxbig:blue:sata0";
- mode-addr = <3>;
- mode-val = <NETXBIG_LED_OFF 0
- NETXBIG_LED_ON 7
- NETXBIG_LED_SATA 1
- NETXBIG_LED_TIMER1 3>;
- bright-addr = <2>;
- max-brightness = <7>;
- };
- red-sata0 {
- label = "netxbig:red:sata0";
- mode-addr = <3>;
- mode-val = <NETXBIG_LED_OFF 0
- NETXBIG_LED_ON 2
- NETXBIG_LED_TIMER1 4>;
- bright-addr = <2>;
- max-brightness = <7>;
- };
- blue-sata1 {
- label = "netxbig:blue:sata1";
- mode-addr = <4>;
- mode-val = <NETXBIG_LED_OFF 0
- NETXBIG_LED_ON 7
- NETXBIG_LED_SATA 1
- NETXBIG_LED_TIMER1 3>;
- bright-addr = <2>;
- max-brightness = <7>;
- };
- red-sata1 {
- label = "netxbig:red:sata1";
- mode-addr = <4>;
- mode-val = <NETXBIG_LED_OFF 0
- NETXBIG_LED_ON 2
- NETXBIG_LED_TIMER1 4>;
- bright-addr = <2>;
- max-brightness = <7>;
- };
- };
-};
-
-&mdio {
- status = "okay";
-
- ethphy0: ethernet-phy@0 {
- reg = <8>;
- };
-
- ethphy1: ethernet-phy@1 {
- reg = <0>;
- };
-};
-
-ð0 {
- status = "okay";
- ethernet0-port@0 {
- phy-handle = <ðphy0>;
- };
-};
-
-&pinctrl {
- pinctrl-names = "default";
-
- pmx_button_function: pmx-button-function {
- marvell,pins = "mpp34";
- marvell,function = "gpio";
- };
- pmx_button_power_off: pmx-button-power-off {
- marvell,pins = "mpp15";
- marvell,function = "gpio";
- };
- pmx_button_power_on: pmx-button-power-on {
- marvell,pins = "mpp13";
- marvell,function = "gpio";
- };
-};
-
-&i2c0 {
- status = "okay";
-
- eeprom@50 {
- compatible = "atmel,24c04";
- pagesize = <16>;
- reg = <0x50>;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
- chosen {
- bootargs = "console=ttyS0,115200n8";
- stdout-path = &uart0;
- };
-
- ocp@f1000000 {
- pinctrl: pin-controller@10000 {
- pmx_ns2_sata0: pmx-ns2-sata0 {
- marvell,pins = "mpp21";
- marvell,function = "sata0";
- };
- pmx_ns2_sata1: pmx-ns2-sata1 {
- marvell,pins = "mpp20";
- marvell,function = "sata1";
- };
- };
-
- serial@12000 {
- status = "okay";
- };
-
- spi@10600 {
- status = "okay";
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "mxicy,mx25l4005a", "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <20000000>;
- mode = <0>;
-
- partition@0 {
- reg = <0x0 0x80000>;
- label = "u-boot";
- };
- };
- };
-
- i2c@11000 {
- status = "okay";
-
- eeprom@50 {
- compatible = "atmel,24c04";
- pagesize = <16>;
- reg = <0x50>;
- };
- };
- };
-
- gpio_keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
-
- power {
- label = "Power push button";
- linux,code = <KEY_POWER>;
- gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- red-fail {
- label = "ns2:red:fail";
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- };
- };
-
- gpio_poweroff {
- compatible = "gpio-poweroff";
- gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
- };
-
-};
-
-&mdio {
- status = "okay";
-
- ethphy0: ethernet-phy@X {
- /* overwrite reg property in board file */
- };
-};
-
-ð0 {
- status = "okay";
- ethernet0-port@0 {
- phy-handle = <ðphy0>;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include <dt-bindings/leds/leds-ns2.h>
-#include "kirkwood-ns2-common.dtsi"
-
-/ {
- model = "LaCie Network Space v2";
- compatible = "lacie,netspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x10000000>;
- };
-
- ocp@f1000000 {
- sata@80000 {
- pinctrl-0 = <&pmx_ns2_sata0>;
- pinctrl-names = "default";
- status = "okay";
- nr-ports = <1>;
- };
- };
-
- ns2-leds {
- compatible = "lacie,ns2-leds";
-
- blue-sata {
- label = "ns2:blue:sata";
- slow-gpio = <&gpio0 29 0>;
- cmd-gpio = <&gpio0 30 0>;
- modes-map = <NS_V2_LED_OFF 1 0
- NS_V2_LED_ON 0 1
- NS_V2_LED_ON 1 1
- NS_V2_LED_SATA 0 0>;
- };
- };
-};
-
-ðphy0 { reg = <8>; };
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "kirkwood-ns2-common.dtsi"
-
-/ {
- model = "LaCie Network Space Lite v2";
- compatible = "lacie,netspace_lite_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood";
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x8000000>;
- };
-
- ocp@f1000000 {
- sata@80000 {
- pinctrl-0 = <&pmx_ns2_sata0>;
- pinctrl-names = "default";
- status = "okay";
- nr-ports = <1>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- blue-sata {
- label = "ns2:blue:sata";
- gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "disk-activity";
- };
- };
-};
-
-ðphy0 { reg = <0>; };
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include <dt-bindings/leds/leds-ns2.h>
-#include "kirkwood-ns2-common.dtsi"
-
-/ {
- model = "LaCie Network Space Max v2";
- compatible = "lacie,netspace_max_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x10000000>;
- };
-
- ocp@f1000000 {
- sata@80000 {
- pinctrl-0 = <&pmx_ns2_sata0 &pmx_ns2_sata1>;
- pinctrl-names = "default";
- status = "okay";
- nr-ports = <2>;
- };
- };
-
- gpio_fan {
- compatible = "gpio-fan";
- gpios = <&gpio0 22 GPIO_ACTIVE_LOW
- &gpio0 7 GPIO_ACTIVE_LOW
- &gpio1 1 GPIO_ACTIVE_LOW
- &gpio0 23 GPIO_ACTIVE_LOW>;
- gpio-fan,speed-map =
- < 0 0
- 1500 15
- 1700 14
- 1800 13
- 2100 12
- 3100 11
- 3300 10
- 4300 9
- 5500 8>;
- alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
- };
-
- ns2-leds {
- compatible = "lacie,ns2-leds";
-
- blue-sata {
- label = "ns2:blue:sata";
- slow-gpio = <&gpio0 29 0>;
- cmd-gpio = <&gpio0 30 0>;
- modes-map = <NS_V2_LED_OFF 1 0
- NS_V2_LED_ON 0 1
- NS_V2_LED_ON 1 1
- NS_V2_LED_SATA 0 0>;
- };
- };
-};
-
-ðphy0 { reg = <8>; };
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include <dt-bindings/leds/leds-ns2.h>
-#include "kirkwood-ns2-common.dtsi"
-
-/ {
- /* This machine is embedded in the first LaCie CloudBox product. */
- model = "LaCie Network Space Mini v2";
- compatible = "lacie,netspace_mini_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood";
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x8000000>;
- };
-
- ocp@f1000000 {
- sata@80000 {
- pinctrl-0 = <&pmx_ns2_sata0>;
- pinctrl-names = "default";
- status = "okay";
- nr-ports = <1>;
- };
- };
-
- gpio_fan {
- compatible = "gpio-fan";
- gpios = <&gpio0 22 GPIO_ACTIVE_LOW
- &gpio0 7 GPIO_ACTIVE_LOW
- &gpio1 1 GPIO_ACTIVE_LOW
- &gpio0 23 GPIO_ACTIVE_LOW>;
- gpio-fan,speed-map =
- < 0 0
- 3000 15
- 3180 14
- 4140 13
- 4570 12
- 6760 11
- 7140 10
- 7980 9
- 9200 8>;
- alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
- };
-
- ns2-leds {
- compatible = "lacie,ns2-leds";
-
- blue-sata {
- label = "ns2:blue:sata";
- slow-gpio = <&gpio0 29 0>;
- cmd-gpio = <&gpio0 30 0>;
- modes-map = <NS_V2_LED_OFF 1 0
- NS_V2_LED_ON 0 1
- NS_V2_LED_ON 1 1
- NS_V2_LED_SATA 0 0>;
- };
- };
-};
-
-ðphy0 { reg = <0>; };
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device tree file for the Zyxel NSA 310S NAS box.
- *
- * Copyright (c) 2015-2021, Tony Dinh <mibodhi@gmail.com>
- *
- * Based on
- * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk>
- * Based upon the board setup file created by Peter Schildmann
- */
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
- model = "Zyxel NSA310S";
- compatible = "zyxel,nsa320s", "marvell,kirkwood-88f6702", "marvell,kirkwood";
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x10000000>;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- stdout-path = &uart0;
- };
-
- ocp@f1000000 {
- pinctrl: pin-controller@10000 {
- pinctrl-names = "default";
-
- pmx_sata0: pmx-sata0 {
- marvell,pins ;
- marvell,function = "sata0";
- };
-
- pmx_sata1: pmx-sata1 {
- marvell,pins ;
- marvell,function = "sata1";
- };
-
- pmx_usb_power: pmx-usb-power {
- marvell,pins = "mpp21";
- marvell,function = "gpio";
- };
-
- pmx_pwr_off: pmx-pwr-off {
- marvell,pins = "mpp27";
- marvell,function = "gpio";
- };
-
- pmx_btn_reset: pmx-btn-reset {
- marvell,pins = "mpp24";
- marvell,function = "gpio";
- };
-
- pmx_btn_copy: pmx-btn-copy {
- marvell,pins = "mpp25";
- marvell,function = "gpio";
- };
-
- pmx_btn_power: pmx-btn-power {
- marvell,pins = "mpp26";
- marvell,function = "gpio";
- };
-
- pmx_led_hdd2_green: pmx-led-hdd2-green {
- marvell,pins = "mpp34";
- marvell,function = "gpio";
- };
-
- pmx_led_hdd2_red: pmx-led-hdd2-red {
- marvell,pins = "mpp12";
- marvell,function = "gpio";
- };
-
- pmx_led_usb_green: pmx-led-usb-green {
- marvell,pins = "mpp15";
- marvell,function = "gpio";
- };
-
- pmx_led_copy_green: pmx-led-copy-green {
- marvell,pins = "mpp22";
- marvell,function = "gpio";
- };
-
- pmx_led_copy_red: pmx-led-copy-red {
- marvell,pins = "mpp23";
- marvell,function = "gpio";
- };
-
- pmx_led_sys_green: pmx-led-sys-green {
- marvell,pins = "mpp28";
- marvell,function = "gpio";
- };
-
- pmx_led_sys_orange: pmx-led-sys-orange {
- marvell,pins = "mpp29";
- marvell,function = "gpio";
- };
-
- pmx_led_hdd1_green: pmx-led-hdd1-green {
- marvell,pins = "mpp16";
- marvell,function = "gpio";
- };
-
- pmx_led_hdd1_red: pmx-led-hdd1-red {
- marvell,pins = "mpp13";
- marvell,function = "gpio";
- };
-
- pmx_pwr_sata1: pmx-pwr-sata1 {
- marvell,pins = "mpp33";
- marvell,function = "gpio";
- };
- };
-
- serial@12000 {
- status = "ok";
- };
-
- sata@80000 {
- status = "okay";
- nr-ports = <1>;
- };
-
- rtc@10300 {
- status = "disabled";
- };
-
- i2c@11000 {
- status = "okay";
- ht1382: rtc@68 {
- compatible = "htk,ht1382";
- reg = <0x68>;
- };
- };
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pmx_usb_power &pmx_pwr_sata1>;
-
- usb0_power: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "USB Power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- enable-active-high;
- gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
- };
-
- sata1_power: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "SATA1 Power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- enable-active-high;
- gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
- };
- };
-
- gpio_poweroff {
- compatible = "gpio-poweroff";
- pinctrl-0 = <&pmx_pwr_off>;
- pinctrl-names = "default";
- gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
- };
-
- gpio_keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
- pinctrl-names = "default";
-
- button@1 {
- label = "Power Button";
- linux,code = <KEY_POWER>;
- gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
- };
- button@2 {
- label = "Copy Button";
- linux,code = <KEY_COPY>;
- gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
- };
- button@3 {
- label = "Reset Button";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
- &pmx_led_usb_green
- &pmx_led_sys_green &pmx_led_sys_orange
- &pmx_led_copy_green &pmx_led_copy_red
- &pmx_led_hdd1_green &pmx_led_hdd1_red>;
- pinctrl-names = "default";
-
- green-sys {
- label = "nsa310s:green:sys";
- gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-on";
- };
- orange-sys {
- label = "nsa310s:orange:sys";
- gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
- };
- green-hdd1 {
- label = "nsa310s:green:hdd1";
- gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
- };
- red-hdd1 {
- label = "nsa310s:red:hdd1";
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
- };
- green-hdd2 {
- label = "nsa310s:green:hdd2";
- gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
- };
- red-hdd2 {
- label = "nsa310s:red:hdd2";
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- };
- green-usb {
- label = "nsa310s:green:usb";
- gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
- };
- green-copy {
- label = "nsa310s:green:copy";
- gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "ide-disk";
- };
- red-copy {
- label = "nsa310s:red:copy";
- gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&nand {
- status = "okay";
- chip-delay = <35>;
-
- partition@0 {
- label = "uboot";
- reg = <0x0000000 0x0100000>;
- };
- partition@100000 {
- label = "stock_uboot_env";
- reg = <0x0100000 0x0080000>;
- };
- partition@180000 {
- label = "key_store";
- reg = <0x0180000 0x0080000>;
- };
- partition@200000 {
- label = "info";
- reg = <0x0200000 0x0080000>;
- };
- partition@280000 {
- label = "etc";
- reg = <0x0280000 0x0a00000>;
- };
- partition@c80000 {
- label = "kernel_1";
- reg = <0x0c80000 0x0a00000>;
- };
- partition@1680000 {
- label = "rootfs1";
- reg = <0x1680000 0x2fc0000>;
- };
- partition@4640000 {
- label = "kernel_2";
- reg = <0x4640000 0x0a00000>;
- };
- partition@5040000 {
- label = "rootfs2";
- reg = <0x5040000 0x2fc0000>;
- };
-};
-
-&mdio {
- status = "okay";
- ethphy0: ethernet-phy@1 {
- compatible = "marvell,88e1510";
- reg = <1>;
- };
-};
-
-ð0 {
- status = "okay";
- ethernet0-port@0 {
- phy-handle = <ðphy0>;
- phy-mode = "rgmii";
- };
-};
-
-&pciec {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/* Device tree file for the Zyxel NSA 325 NAS box.
- *
- * Copyright (c) 2015, Hans Ulli Kroll <ulli.kroll@googlemail.com>
- *
- *
- * Based upon the board setup file created by Peter Schildmann
- */
-
-/dts-v1/;
-
-#include "kirkwood-nsa3x0-common.dtsi"
-
-/ {
- model = "ZyXEL NSA325";
- compatible = "zyxel,nsa325", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x20000000>;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- stdout-path = &uart0;
- };
-
- ocp@f1000000 {
- pinctrl: pin-controller@10000 {
- pinctrl-names = "default";
-
- pmx_led_hdd2_green: pmx-led-hdd2-green {
- marvell,pins = "mpp12";
- marvell,function = "gpio";
- };
-
- pmx_led_hdd2_red: pmx-led-hdd2-red {
- marvell,pins = "mpp13";
- marvell,function = "gpio";
- };
-
- pmx_mcu_data: pmx-mcu-data {
- marvell,pins = "mpp14";
- marvell,function = "gpio";
- };
-
- pmx_led_usb_green: pmx-led-usb-green {
- marvell,pins = "mpp15";
- marvell,function = "gpio";
- };
-
- pmx_mcu_clk: pmx-mcu-clk {
- marvell,pins = "mpp16";
- marvell,function = "gpio";
- };
-
- pmx_mcu_act: pmx-mcu-act {
- marvell,pins = "mpp17";
- marvell,function = "gpio";
- };
-
- pmx_led_sys_green: pmx-led-sys-green {
- marvell,pins = "mpp28";
- marvell,function = "gpio";
- };
-
- pmx_led_sys_orange: pmx-led-sys-orange {
- marvell,pins = "mpp29";
- marvell,function = "gpio";
- };
-
- pmx_led_hdd1_green: pmx-led-hdd1-green {
- marvell,pins = "mpp41";
- marvell,function = "gpio";
- };
-
- pmx_led_hdd1_red: pmx-led-hdd1-red {
- marvell,pins = "mpp42";
- marvell,function = "gpio";
- };
-
- pmx_htp: pmx-htp {
- marvell,pins = "mpp43";
- marvell,function = "gpio";
- };
-
- /*
- * Buzzer needs to be switched at around 1kHz so is
- * not compatible with the gpio-beeper driver.
- */
- pmx_buzzer: pmx-buzzer {
- marvell,pins = "mpp44";
- marvell,function = "gpio";
- };
-
- pmx_vid_b1: pmx-vid-b1 {
- marvell,pins = "mpp45";
- marvell,function = "gpio";
- };
-
- pmx_power_resume_data: pmx-power-resume-data {
- marvell,pins = "mpp47";
- marvell,function = "gpio";
- };
-
- pmx_power_resume_clk: pmx-power-resume-clk {
- marvell,pins = "mpp49";
- marvell,function = "gpio";
- };
-
- pmx_pwr_sata1: pmx-pwr-sata1 {
- marvell,pins = "mpp47";
- marvell,function = "gpio";
- };
- };
-
- /* This board uses the pcf8563 RTC instead of the SoC RTC */
- rtc@10300 {
- status = "disabled";
- };
-
- i2c@11000 {
- status = "okay";
-
- pcf8563: pcf8563@51 {
- compatible = "nxp,pcf8563";
- reg = <0x51>;
- };
- };
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_pwr_sata1>;
- pinctrl-names = "default";
-
- usb0_power: regulator@1 {
- enable-active-high;
- };
-
- sata1_power: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "SATA1 Power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- enable-active-high;
- gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
- &pmx_led_usb_green
- &pmx_led_sys_green &pmx_led_sys_orange
- &pmx_led_copy_green &pmx_led_copy_red
- &pmx_led_hdd1_green &pmx_led_hdd1_red>;
- pinctrl-names = "default";
-
- green-sys {
- label = "nsa325:green:sys";
- gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
- };
- orange-sys {
- label = "nsa325:orange:sys";
- gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
- };
- green-hdd1 {
- label = "nsa325:green:hdd1";
- gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
- };
- red-hdd1 {
- label = "nsa325:red:hdd1";
- gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
- };
- green-hdd2 {
- label = "nsa325:green:hdd2";
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- };
- red-hdd2 {
- label = "nsa325:red:hdd2";
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
- };
- green-usb {
- label = "nsa325:green:usb";
- gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
- };
- green-copy {
- label = "nsa325:green:copy";
- gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
- };
- red-copy {
- label = "nsa325:red:copy";
- gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
- };
-
- /* The following pins are currently not assigned to a driver,
- some of them should be configured as inputs.
- pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act
- &pmx_htp &pmx_vid_b1
- &pmx_power_resume_data &pmx_power_resume_clk>; */
- };
-
-};
-
-&mdio {
- status = "okay";
- ethphy0: ethernet-phy@1 {
- reg = <1>;
- };
-};
-
-ð0 {
- status = "okay";
- ethernet0-port@0 {
- phy-handle = <ðphy0>;
- };
-};
-
-&pciec {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
- model = "ZyXEL NSA310";
-
- ocp@f1000000 {
- pinctrl: pin-controller@10000 {
-
- pmx_usb_power: pmx-usb-power {
- marvell,pins = "mpp21";
- marvell,function = "gpio";
- };
-
- pmx_pwr_off: pmx-pwr-off {
- marvell,pins = "mpp48";
- marvell,function = "gpio";
- };
-
- pmx_btn_reset: pmx-btn-reset {
- marvell,pins = "mpp36";
- marvell,function = "gpio";
- };
-
- pmx_btn_copy: pmx-btn-copy {
- marvell,pins = "mpp37";
- marvell,function = "gpio";
- };
-
- pmx_btn_power: pmx-btn-power {
- marvell,pins = "mpp46";
- marvell,function = "gpio";
- };
-
- pmx_led_copy_green: pmx-led-copy-green {
- marvell,pins = "mpp39";
- marvell,function = "gpio";
- };
-
- pmx_led_copy_red: pmx-led-copy-red {
- marvell,pins = "mpp40";
- marvell,function = "gpio";
- };
- };
-
- serial@12000 {
- status = "okay";
- };
-
- sata@80000 {
- status = "okay";
- nr-ports = <2>;
- };
- };
-
- gpio_poweroff {
- compatible = "gpio-poweroff";
- pinctrl-0 = <&pmx_pwr_off>;
- pinctrl-names = "default";
- gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
- };
-
- gpio_keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
- pinctrl-names = "default";
-
- power {
- label = "Power Button";
- linux,code = <KEY_POWER>;
- gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
- };
- copy {
- label = "Copy Button";
- linux,code = <KEY_COPY>;
- gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
- };
- reset {
- label = "Reset Button";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
- };
- };
-
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_usb_power>;
- pinctrl-names = "default";
-
- usb0_power: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "USB Power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&nand {
- status = "okay";
- chip-delay = <35>;
-
- partition@0 {
- label = "uboot";
- reg = <0x0000000 0x0100000>;
- };
- partition@100000 {
- label = "uboot_env";
- reg = <0x0100000 0x0080000>;
- };
- partition@180000 {
- label = "key_store";
- reg = <0x0180000 0x0080000>;
- };
- partition@200000 {
- label = "info";
- reg = <0x0200000 0x0080000>;
- };
- partition@280000 {
- label = "etc";
- reg = <0x0280000 0x0a00000>;
- };
- partition@c80000 {
- label = "kernel_1";
- reg = <0x0c80000 0x0a00000>;
- };
- partition@1680000 {
- label = "rootfs1";
- reg = <0x1680000 0x2fc0000>;
- };
- partition@4640000 {
- label = "kernel_2";
- reg = <0x4640000 0x0a00000>;
- };
- partition@5040000 {
- label = "rootfs2";
- reg = <0x5040000 0x2fc0000>;
- };
-};
-
-&pciec {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Marvell OpenRD Base Board Description
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file contains the definitions that are specific to OpenRD
- * base variant of the Marvell Kirkwood Development Board.
- */
-
-/dts-v1/;
-
-#include "kirkwood-openrd.dtsi"
-
-/ {
- model = "OpenRD Base";
- compatible = "marvell,openrd-base", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
- ocp@f1000000 {
- serial@12100 {
- status = "okay";
- };
- };
-};
-
-&mdio {
- status = "okay";
-
- ethphy0: ethernet-phy@8 {
- reg = <8>;
- };
-};
-
-ð0 {
- status = "okay";
- ethernet0-port@0 {
- phy-handle = <ðphy0>;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Marvell OpenRD Client Board Description
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file contains the definitions that are specific to OpenRD
- * client variant of the Marvell Kirkwood Development Board.
- */
-
-/dts-v1/;
-
-#include "kirkwood-openrd.dtsi"
-
-/ {
- model = "OpenRD Client";
- compatible = "marvell,openrd-client", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
- ocp@f1000000 {
- audio-controller@a0000 {
- status = "okay";
- };
- i2c@11000 {
- status = "okay";
- clock-frequency = <400000>;
-
- cs42l51: cs42l51@4a {
- compatible = "cirrus,cs42l51";
- reg = <0x4a>;
- #sound-dai-cells = <0>;
- };
- };
- };
-
- sound {
- compatible = "simple-audio-card";
- simple-audio-card,format = "i2s";
- simple-audio-card,mclk-fs = <256>;
-
- simple-audio-card,cpu {
- sound-dai = <&audio0 0>;
- };
-
- simple-audio-card,codec {
- sound-dai = <&cs42l51>;
- };
- };
-};
-
-&mdio {
- status = "okay";
-
- ethphy0: ethernet-phy@8 {
- reg = <8>;
- };
- ethphy1: ethernet-phy@24 {
- reg = <24>;
- };
-};
-
-ð0 {
- status = "okay";
- ethernet0-port@0 {
- phy-handle = <ðphy0>;
- };
-};
-
-ð1 {
- status = "okay";
- ethernet1-port@0 {
- phy-handle = <ðphy1>;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Marvell OpenRD Ultimate Board Description
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file contains the definitions that are specific to OpenRD
- * ultimate variant of the Marvell Kirkwood Development Board.
- */
-
-/dts-v1/;
-
-#include "kirkwood-openrd.dtsi"
-
-/ {
- model = "OpenRD Ultimate";
- compatible = "marvell,openrd-ultimate", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
- ocp@f1000000 {
- i2c@11000 {
- status = "okay";
- clock-frequency = <400000>;
-
- cs42l51: cs42l51@4a {
- compatible = "cirrus,cs42l51";
- reg = <0x4a>;
- };
- };
- };
-};
-
-&mdio {
- status = "okay";
-
- ethphy0: ethernet-phy@0 {
- reg = <0>;
- };
- ethphy1: ethernet-phy@1 {
- reg = <1>;
- };
-};
-
-ð0 {
- status = "okay";
- ethernet0-port@0 {
- phy-handle = <ðphy0>;
- };
-};
-
-ð1 {
- status = "okay";
- ethernet1-port@0 {
- phy-handle = <ðphy1>;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Marvell OpenRD (Base|Client|Ultimate) Board Description
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file contains the definitions that are common between the three
- * variants of the Marvell Kirkwood Development Board.
- */
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
- memory {
- device_type = "memory";
- reg = <0x00000000 0x20000000>;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200n8";
- stdout-path = &uart0;
- };
-
- ocp@f1000000 {
- pinctrl: pin-controller@10000 {
- pinctrl-0 = <&pmx_select28 &pmx_sdio_cd &pmx_select34>;
- pinctrl-names = "default";
-
- pmx_select28: pmx-select-rs232-rs485 {
- marvell,pins = "mpp28";
- marvell,function = "gpio";
- };
- pmx_sdio_cd: pmx-sdio-cd {
- marvell,pins = "mpp29";
- marvell,function = "gpio";
- };
- pmx_select34: pmx-select-uart-sd {
- marvell,pins = "mpp34";
- marvell,function = "gpio";
- };
- };
- serial@12000 {
- status = "okay";
-
- };
- sata@80000 {
- status = "okay";
- nr-ports = <2>;
- };
- mvsdio@90000 {
- status = "okay";
- cd-gpios = <&gpio0 29 9>;
- };
- gpio@10100 {
- p28 {
- gpio-hog;
- gpios = <28 GPIO_ACTIVE_HIGH>;
- /*
- * SelRS232or485 selects between RS-232 or RS-485
- * mode for the second UART.
- *
- * Low: RS-232
- * High: RS-485
- *
- * To use the second UART, you need to change also
- * the SelUARTorSD.
- */
- output-low;
- line-name = "SelRS232or485";
- };
- };
- gpio@10140 {
- p2 {
- gpio-hog;
- gpios = <2 GPIO_ACTIVE_HIGH>;
- /*
- * SelUARTorSD selects between the second UART
- * (serial@12100) and SD (mvsdio@90000).
- *
- * Low: UART
- * High: SD
- *
- * When changing this line make sure the newly
- * selected device node is enabled and the
- * previously selected device node is disabled.
- */
- output-high; /* Select SD by default */
- line-name = "SelUARTorSD";
- };
- };
- };
-};
-
-&nand {
- status = "okay";
- pinctrl-0 = <&pmx_nand>;
- pinctrl-names = "default";
-
- partition@0 {
- label = "u-boot";
- reg = <0x0000000 0x100000>;
- };
-
- partition@100000 {
- label = "uImage";
- reg = <0x0100000 0x400000>;
- };
-
- partition@600000 {
- label = "root";
- reg = <0x0600000 0x1FA00000>;
- };
-};
-
-&pciec {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * kirkwood-pogo_e02.dts - Device tree file for Pogoplug E02
- *
- * Copyright (C) 2015 Christoph Junghans <ottxor@gentoo.org>
- *
- * based on information of dts files from
- * Arch Linux ARM by Oleg Rakhmanov <moonman.ca@gmail.com>
- * OpenWrt by Felix Kaechele <heffer@fedoraproject.org>
- *
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
- model = "Cloud Engines Pogoplug E02";
- compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281",
- "marvell,kirkwood";
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x10000000>;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200n8";
- stdout-path = &uart0;
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- health {
- label = "pogo_e02:green:health";
- gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
- fault {
- label = "pogo_e02:orange:fault";
- gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
- };
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_usb_power_enable>;
- pinctrl-names = "default";
-
- usb_power: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "USB Power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&pinctrl {
- pinctrl-0 = < &pmx_usb_power_enable &pmx_led_orange
- &pmx_led_green >;
- pinctrl-names = "default";
-
- pmx_usb_power_enable: pmx-usb-power-enable {
- marvell,pins = "mpp29";
- marvell,function = "gpio";
- };
-
- pmx_led_green: pmx-led-green {
- marvell,pins = "mpp48";
- marvell,function = "gpio";
- };
-
- pmx_led_orange: pmx-led-orange {
- marvell,pins = "mpp49";
- marvell,function = "gpio";
- };
-};
-
-&uart0 {
- status = "okay";
-};
-
-&nand {
- chip-delay = <40>;
- status = "okay";
-
- partition@0 {
- label = "u-boot";
- reg = <0x0000000 0x100000>;
- read-only;
- };
-
- partition@100000 {
- label = "uImage";
- reg = <0x0100000 0x400000>;
- };
-
- partition@500000 {
- label = "pogoplug";
- reg = <0x0500000 0x2000000>;
- };
-
- partition@2500000 {
- label = "root";
- reg = <0x02500000 0x5b00000>;
- };
-};
-
-&mdio {
- status = "okay";
-
- ethphy0: ethernet-phy@0 {
- reg = <0>;
- };
-};
-
-ð0 {
- status = "okay";
- ethernet0-port@0 {
- phy-handle = <ðphy0>;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * kirkwood-pogoplug-series-4.dts - Device tree file for PogoPlug Series 4
- * inspired by the board files made by Kevin Mihelich for ArchLinux,
- * and their DTS file.
- *
- * Copyright (C) 2015 Linus Walleij <linus.walleij@linaro.org>
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6192.dtsi"
-#include <dt-bindings/input/linux-event-codes.h>
-
-/ {
- model = "Cloud Engines PogoPlug Series 4";
- compatible = "cloudengines,pogoplugv4", "marvell,kirkwood-88f6192",
- "marvell,kirkwood";
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x08000000>;
- };
-
- chosen {
- stdout-path = "uart0:115200n8";
- };
-
- gpio_keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_button_eject>;
- pinctrl-names = "default";
-
- eject {
- debounce-interval = <50>;
- wakeup-source;
- linux,code = <KEY_EJECTCD>;
- label = "Eject Button";
- gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&pmx_led_green &pmx_led_red>;
- pinctrl-names = "default";
-
- health {
- label = "pogoplugv4:green:health";
- gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
- fault {
- label = "pogoplugv4:red:fault";
- gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&pinctrl {
- pmx_sata0: pmx-sata0 {
- marvell,pins = "mpp21";
- marvell,function = "sata0";
- };
-
- pmx_sata1: pmx-sata1 {
- marvell,pins = "mpp20";
- marvell,function = "sata1";
- };
-
- pmx_sdio_cd: pmx-sdio-cd {
- marvell,pins = "mpp27";
- marvell,function = "gpio";
- };
-
- pmx_sdio_wp: pmx-sdio-wp {
- marvell,pins = "mpp28";
- marvell,function = "gpio";
- };
-
- pmx_button_eject: pmx-button-eject {
- marvell,pins = "mpp29";
- marvell,function = "gpio";
- };
-
- pmx_led_green: pmx-led-green {
- marvell,pins = "mpp22";
- marvell,function = "gpio";
- };
-
- pmx_led_red: pmx-led-red {
- marvell,pins = "mpp24";
- marvell,function = "gpio";
- };
-};
-
-&uart0 {
- status = "okay";
-};
-
-/*
- * This PCIE controller has a USB 3.0 XHCI controller at 1,0
- */
-&pciec {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
-};
-
-&sata {
- status = "okay";
- pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
- pinctrl-names = "default";
- nr-ports = <1>;
-};
-
-&sdio {
- status = "okay";
- pinctrl-0 = <&pmx_sdio &pmx_sdio_cd &pmx_sdio_wp>;
- pinctrl-names = "default";
- cd-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-};
-
-&nand {
- /* 128 MiB of NAND flash */
- chip-delay = <40>;
- status = "okay";
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x00000000 0x200000>;
- read-only;
- };
-
- partition@200000 {
- label = "uImage";
- reg = <0x00200000 0x300000>;
- };
-
- partition@500000 {
- label = "uImage2";
- reg = <0x00500000 0x300000>;
- };
-
- partition@800000 {
- label = "failsafe";
- reg = <0x00800000 0x800000>;
- };
-
- partition@1000000 {
- label = "root";
- reg = <0x01000000 0x7000000>;
- };
- };
-};
-
-&mdio {
- status = "okay";
-
- ethphy0: ethernet-phy@0 {
- reg = <0>;
- };
-};
-
-ð0 {
- status = "okay";
- ethernet0-port@0 {
- phy-handle = <ðphy0>;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * kirkwood-sheevaplug-common.dtsi - Common parts for Sheevaplugs
- *
- * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
- */
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
- memory {
- device_type = "memory";
- reg = <0x00000000 0x20000000>;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200n8 earlyprintk";
- stdout-path = &uart0;
- };
-
- ocp@f1000000 {
- pinctrl: pin-controller@10000 {
-
- pmx_usb_power_enable: pmx-usb-power-enable {
- marvell,pins = "mpp29";
- marvell,function = "gpio";
- };
- pmx_led_red: pmx-led-red {
- marvell,pins = "mpp46";
- marvell,function = "gpio";
- };
- pmx_led_blue: pmx-led-blue {
- marvell,pins = "mpp49";
- marvell,function = "gpio";
- };
- pmx_sdio_cd: pmx-sdio-cd {
- marvell,pins = "mpp44";
- marvell,function = "gpio";
- };
- pmx_sdio_wp: pmx-sdio-wp {
- marvell,pins = "mpp47";
- marvell,function = "gpio";
- };
- };
- serial@12000 {
- status = "okay";
- };
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_usb_power_enable>;
- pinctrl-names = "default";
-
- usb_power: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "USB Power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio0 29 0>;
- };
- };
-};
-
-&nand {
- status = "okay";
-
- partition@0 {
- label = "u-boot";
- reg = <0x0000000 0x100000>;
- };
-
- partition@100000 {
- label = "uImage";
- reg = <0x0100000 0x400000>;
- };
-
- partition@500000 {
- label = "root";
- reg = <0x0500000 0x1fb00000>;
- };
-};
-
-&mdio {
- status = "okay";
-
- ethphy0: ethernet-phy@0 {
- reg = <0>;
- };
-};
-
-ð0 {
- status = "okay";
- ethernet0-port@0 {
- phy-handle = <ðphy0>;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * kirkwood-sheevaplug.dts - Device tree file for Sheevaplug
- *
- * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
- */
-
-/dts-v1/;
-
-#include "kirkwood-sheevaplug-common.dtsi"
-
-/ {
- model = "Globalscale Technologies SheevaPlug";
- compatible = "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
- ocp@f1000000 {
- mvsdio@90000 {
- pinctrl-0 = <&pmx_sdio>;
- pinctrl-names = "default";
- status = "okay";
- /* No CD or WP GPIOs */
- broken-cd;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&pmx_led_blue &pmx_led_red>;
- pinctrl-names = "default";
-
- health {
- label = "sheevaplug:blue:health";
- gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
-
- misc {
- label = "sheevaplug:red:misc";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Nodes for Marvell 628x Synology devices
- *
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- */
-
-/ {
- ocp@f1000000 {
- pinctrl: pin-controller@10000 {
- pmx_alarmled_12: pmx-alarmled-12 {
- marvell,pins = "mpp12";
- marvell,function = "gpio";
- };
-
- pmx_fanctrl_15: pmx-fanctrl-15 {
- marvell,pins = "mpp15";
- marvell,function = "gpio";
- };
-
- pmx_fanctrl_16: pmx-fanctrl-16 {
- marvell,pins = "mpp16";
- marvell,function = "gpio";
- };
-
- pmx_fanctrl_17: pmx-fanctrl-17 {
- marvell,pins = "mpp17";
- marvell,function = "gpio";
- };
-
- pmx_fanalarm_18: pmx-fanalarm-18 {
- marvell,pins = "mpp18";
- marvell,function = "gpo";
- };
-
- pmx_hddled_20: pmx-hddled-20 {
- marvell,pins = "mpp20";
- marvell,function = "gpio";
- };
-
- pmx_hddled_21: pmx-hddled-21 {
- marvell,pins = "mpp21";
- marvell,function = "gpio";
- };
-
- pmx_hddled_22: pmx-hddled-22 {
- marvell,pins = "mpp22";
- marvell,function = "gpio";
- };
-
- pmx_hddled_23: pmx-hddled-23 {
- marvell,pins = "mpp23";
- marvell,function = "gpio";
- };
-
- pmx_hddled_24: pmx-hddled-24 {
- marvell,pins = "mpp24";
- marvell,function = "gpio";
- };
-
- pmx_hddled_25: pmx-hddled-25 {
- marvell,pins = "mpp25";
- marvell,function = "gpio";
- };
-
- pmx_hddled_26: pmx-hddled-26 {
- marvell,pins = "mpp26";
- marvell,function = "gpio";
- };
-
- pmx_hddled_27: pmx-hddled-27 {
- marvell,pins = "mpp27";
- marvell,function = "gpio";
- };
-
- pmx_hddled_28: pmx-hddled-28 {
- marvell,pins = "mpp28";
- marvell,function = "gpio";
- };
-
- pmx_hdd1_pwr_29: pmx-hdd1-pwr-29 {
- marvell,pins = "mpp29";
- marvell,function = "gpio";
- };
-
- pmx_hdd1_pwr_30: pmx-hdd-pwr-30 {
- marvell,pins = "mpp30";
- marvell,function = "gpio";
- };
-
- pmx_hdd2_pwr_31: pmx-hdd2-pwr-31 {
- marvell,pins = "mpp31";
- marvell,function = "gpio";
- };
-
- pmx_fanctrl_32: pmx-fanctrl-32 {
- marvell,pins = "mpp32";
- marvell,function = "gpio";
- };
-
- pmx_fanctrl_33: pmx-fanctrl-33 {
- marvell,pins = "mpp33";
- marvell,function = "gpo";
- };
-
- pmx_fanctrl_34: pmx-fanctrl-34 {
- marvell,pins = "mpp34";
- marvell,function = "gpio";
- };
-
- pmx_hdd2_pwr_34: pmx-hdd2-pwr-34 {
- marvell,pins = "mpp34";
- marvell,function = "gpio";
- };
-
- pmx_fanalarm_35: pmx-fanalarm-35 {
- marvell,pins = "mpp35";
- marvell,function = "gpio";
- };
-
- pmx_hddled_36: pmx-hddled-36 {
- marvell,pins = "mpp36";
- marvell,function = "gpio";
- };
-
- pmx_hddled_37: pmx-hddled-37 {
- marvell,pins = "mpp37";
- marvell,function = "gpio";
- };
-
- pmx_hddled_38: pmx-hddled-38 {
- marvell,pins = "mpp38";
- marvell,function = "gpio";
- };
-
- pmx_hddled_39: pmx-hddled-39 {
- marvell,pins = "mpp39";
- marvell,function = "gpio";
- };
-
- pmx_hddled_40: pmx-hddled-40 {
- marvell,pins = "mpp40";
- marvell,function = "gpio";
- };
-
- pmx_hddled_41: pmx-hddled-41 {
- marvell,pins = "mpp41";
- marvell,function = "gpio";
- };
-
- pmx_hddled_42: pmx-hddled-42 {
- marvell,pins = "mpp42";
- marvell,function = "gpio";
- };
-
- pmx_hddled_43: pmx-hddled-43 {
- marvell,pins = "mpp43";
- marvell,function = "gpio";
- };
-
- pmx_hddled_44: pmx-hddled-44 {
- marvell,pins = "mpp44";
- marvell,function = "gpio";
- };
-
- pmx_hddled_45: pmx-hddled-45 {
- marvell,pins = "mpp45";
- marvell,function = "gpio";
- };
-
- pmx_hdd3_pwr_44: pmx-hdd3-pwr-44 {
- marvell,pins = "mpp44";
- marvell,function = "gpio";
- };
-
- pmx_hdd4_pwr_45: pmx-hdd4-pwr-45 {
- marvell,pins = "mpp45";
- marvell,function = "gpio";
- };
-
- pmx_fanalarm_44: pmx-fanalarm-44 {
- marvell,pins = "mpp44";
- marvell,function = "gpio";
- };
-
- pmx_fanalarm_45: pmx-fanalarm-45 {
- marvell,pins = "mpp45";
- marvell,function = "gpio";
- };
- };
-
- rtc@10300 {
- status = "disabled";
- };
-
- spi@10600 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "st,m25p80", "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <20000000>;
- mode = <0>;
-
- partition@0 {
- reg = <0x00000000 0x00080000>;
- label = "RedBoot";
- };
-
- partition@80000 {
- reg = <0x00080000 0x00200000>;
- label = "zImage";
- };
-
- partition@280000 {
- reg = <0x00280000 0x00140000>;
- label = "rd.gz";
- };
-
- partition@3c0000 {
- reg = <0x003c0000 0x00010000>;
- label = "vendor";
- };
-
- partition@3d0000 {
- reg = <0x003d0000 0x00020000>;
- label = "RedBoot config";
- };
-
- partition@3f0000 {
- reg = <0x003f0000 0x00010000>;
- label = "FIS directory";
- };
- };
- };
-
- i2c@11000 {
- status = "okay";
- clock-frequency = <400000>;
-
- rs5c372: rs5c372@32 {
- status = "disabled";
- compatible = "ricoh,rs5c372";
- reg = <0x32>;
- };
-
- s35390a: s35390a@30 {
- status = "disabled";
- compatible = "sii,s35390a";
- reg = <0x30>;
- };
- };
-
- serial@12000 {
- status = "okay";
- };
-
- serial@12100 {
- status = "okay";
- };
-
- poweroff@12100 {
- compatible = "synology,power-off";
- reg = <0x12100 0x100>;
- clocks = <&gate_clk 7>;
- };
-
- sata@80000 {
- pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
- pinctrl-names = "default";
- status = "okay";
- nr-ports = <2>;
- };
- };
-
- gpio-fan-150-32-35 {
- status = "disabled";
- compatible = "gpio-fan";
- pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34
- &pmx_fanalarm_35>;
- pinctrl-names = "default";
- gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
- &gpio1 1 GPIO_ACTIVE_HIGH
- &gpio1 2 GPIO_ACTIVE_HIGH>;
- gpio-fan,speed-map = < 0 0
- 2200 1
- 2500 2
- 3000 4
- 3300 3
- 3700 5
- 3800 6
- 4200 7 >;
- };
-
- gpio-fan-150-15-18 {
- status = "disabled";
- compatible = "gpio-fan";
- pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
- &pmx_fanalarm_18>;
- pinctrl-names = "default";
- gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
- &gpio0 16 GPIO_ACTIVE_HIGH
- &gpio0 17 GPIO_ACTIVE_HIGH>;
- alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
- gpio-fan,speed-map = < 0 0
- 2200 1
- 2500 2
- 3000 4
- 3300 3
- 3700 5
- 3800 6
- 4200 7 >;
- };
-
- gpio-fan-100-32-35 {
- status = "disabled";
- compatible = "gpio-fan";
- pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34
- &pmx_fanalarm_35>;
- pinctrl-names = "default";
- gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
- &gpio1 1 GPIO_ACTIVE_HIGH
- &gpio1 2 GPIO_ACTIVE_HIGH>;
- alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
- gpio-fan,speed-map = < 0 0
- 2500 1
- 3100 2
- 3800 3
- 4600 4
- 4800 5
- 4900 6
- 5000 7 >;
- };
-
- gpio-fan-100-15-18 {
- status = "disabled";
- compatible = "gpio-fan";
- pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
- &pmx_fanalarm_18>;
- pinctrl-names = "default";
- gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
- &gpio0 16 GPIO_ACTIVE_HIGH
- &gpio0 17 GPIO_ACTIVE_HIGH>;
- alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
- gpio-fan,speed-map = < 0 0
- 2500 1
- 3100 2
- 3800 3
- 4600 4
- 4800 5
- 4900 6
- 5000 7 >;
- };
-
- gpio-fan-100-15-35-1 {
- status = "disabled";
- compatible = "gpio-fan";
- pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
- &pmx_fanalarm_35>;
- pinctrl-names = "default";
- gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
- &gpio0 16 GPIO_ACTIVE_HIGH
- &gpio0 17 GPIO_ACTIVE_HIGH>;
- alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
- gpio-fan,speed-map = < 0 0
- 2500 1
- 3100 2
- 3800 3
- 4600 4
- 4800 5
- 4900 6
- 5000 7 >;
- };
-
- gpio-fan-100-15-35-3 {
- status = "disabled";
- compatible = "gpio-fan";
- pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
- &pmx_fanalarm_35 &pmx_fanalarm_44 &pmx_fanalarm_45>;
- pinctrl-names = "default";
- gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
- &gpio0 16 GPIO_ACTIVE_HIGH
- &gpio0 17 GPIO_ACTIVE_HIGH>;
- alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH
- &gpio1 12 GPIO_ACTIVE_HIGH
- &gpio1 13 GPIO_ACTIVE_HIGH>;
- gpio-fan,speed-map = < 0 0
- 2500 1
- 3100 2
- 3800 3
- 4600 4
- 4800 5
- 4900 6
- 5000 7 >;
- };
-
- gpio-leds-alarm-12 {
- status = "disabled";
- compatible = "gpio-leds";
- pinctrl-0 = <&pmx_alarmled_12>;
- pinctrl-names = "default";
-
- hdd1-green {
- label = "synology:alarm";
- gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio-leds-hdd-20 {
- status = "disabled";
- compatible = "gpio-leds";
- pinctrl-0 = <&pmx_hddled_20 &pmx_hddled_21 &pmx_hddled_22
- &pmx_hddled_23 &pmx_hddled_24 &pmx_hddled_25
- &pmx_hddled_26 &pmx_hddled_27>;
- pinctrl-names = "default";
-
- hdd1-green {
- label = "synology:green:hdd1";
- gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
- };
-
- hdd1-amber {
- label = "synology:amber:hdd1";
- gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
- };
-
- hdd2-green {
- label = "synology:green:hdd2";
- gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
- };
-
- hdd2-amber {
- label = "synology:amber:hdd2";
- gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
- };
-
- hdd3-green {
- label = "synology:green:hdd3";
- gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
- };
-
- hdd3-amber {
- label = "synology:amber:hdd3";
- gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
- };
-
- hdd4-green {
- label = "synology:green:hdd4";
- gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
- };
-
- hdd4-amber {
- label = "synology:amber:hdd4";
- gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio-leds-hdd-21-1 {
- status = "disabled";
- compatible = "gpio-leds";
- pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23>;
- pinctrl-names = "default";
-
- hdd1-green {
- label = "synology:green:hdd1";
- gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
- };
-
- hdd1-amber {
- label = "synology:amber:hdd1";
- gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio-leds-hdd-21-2 {
- status = "disabled";
- compatible = "gpio-leds";
- pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23 &pmx_hddled_20 &pmx_hddled_22>;
- pinctrl-names = "default";
-
- hdd1-green {
- label = "synology:green:hdd1";
- gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
- };
-
- hdd1-amber {
- label = "synology:amber:hdd1";
- gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
- };
-
- hdd2-green {
- label = "synology:green:hdd2";
- gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
- };
-
- hdd2-amber {
- label = "synology:amber:hdd2";
- gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio-leds-hdd-36 {
- status = "disabled";
- compatible = "gpio-leds";
- pinctrl-0 = <&pmx_hddled_36 &pmx_hddled_37 &pmx_hddled_38
- &pmx_hddled_39 &pmx_hddled_40 &pmx_hddled_41
- &pmx_hddled_42 &pmx_hddled_43 &pmx_hddled_44
- &pmx_hddled_45>;
- pinctrl-names = "default";
-
- hdd1-green {
- label = "synology:green:hdd1";
- gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
- };
-
- hdd1-amber {
- label = "synology:amber:hdd1";
- gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
- };
-
- hdd2-green {
- label = "synology:green:hdd2";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- };
-
- hdd2-amber {
- label = "synology:amber:hdd2";
- gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
- };
-
- hdd3-green {
- label = "synology:green:hdd3";
- gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
- };
-
- hdd3-amber {
- label = "synology:amber:hdd3";
- gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
- };
-
- hdd4-green {
- label = "synology:green:hdd4";
- gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
- };
-
- hdd4-amber {
- label = "synology:amber:hdd4";
- gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
- };
-
- hdd5-green {
- label = "synology:green:hdd5";
- gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- };
-
- hdd5-amber {
- label = "synology:amber:hdd5";
- gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio-leds-hdd-38 {
- status = "disabled";
- compatible = "gpio-leds";
- pinctrl-0 = <&pmx_hddled_38 &pmx_hddled_39 &pmx_hddled_36 &pmx_hddled_37>;
- pinctrl-names = "default";
-
- hdd1-green {
- label = "synology:green:hdd1";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- };
-
- hdd1-amber {
- label = "synology:amber:hdd1";
- gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
- };
-
- hdd2-green {
- label = "synology:green:hdd2";
- gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
- };
-
- hdd2-amber {
- label = "synology:amber:hdd2";
- gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
- };
- };
-
- regulators-hdd-29 {
- status = "disabled";
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_hdd1_pwr_29 &pmx_hdd2_pwr_31>;
- pinctrl-names = "default";
-
- regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "hdd1power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- startup-delay-us = <5000000>;
- gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
- };
-
- regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "hdd2power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- startup-delay-us = <5000000>;
- gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>;
- };
- };
-
- regulators-hdd-30-1 {
- status = "disabled";
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_hdd1_pwr_30>;
- pinctrl-names = "default";
-
- regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "hdd1power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- startup-delay-us = <5000000>;
- gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
- };
- };
-
- regulators-hdd-30-2 {
- status = "disabled";
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34>;
- pinctrl-names = "default";
-
- regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "hdd1power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- startup-delay-us = <5000000>;
- gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
- };
-
- regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "hdd2power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- startup-delay-us = <5000000>;
- gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
- };
- };
-
- regulators-hdd-30-4 {
- status = "disabled";
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34
- &pmx_hdd3_pwr_44 &pmx_hdd4_pwr_45>;
- pinctrl-names = "default";
-
- regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "hdd1power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- startup-delay-us = <5000000>;
- gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
- };
-
- regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "hdd2power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- startup-delay-us = <5000000>;
- gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
- };
-
- regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "hdd3power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- startup-delay-us = <5000000>;
- gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
- };
-
- regulator@4 {
- compatible = "regulator-fixed";
- reg = <4>;
- regulator-name = "hdd4power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- startup-delay-us = <5000000>;
- gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
- };
- };
-
- regulators-hdd-31 {
- status = "disabled";
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_hdd2_pwr_31>;
- pinctrl-names = "default";
-
- regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "hdd2power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- startup-delay-us = <5000000>;
- gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>;
- };
- };
-
- regulators-hdd-34 {
- status = "disabled";
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_hdd2_pwr_34 &pmx_hdd3_pwr_44
- &pmx_hdd4_pwr_45>;
- pinctrl-names = "default";
-
- regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "hdd2power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- startup-delay-us = <5000000>;
- gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
- };
-
- regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "hdd3power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- startup-delay-us = <5000000>;
- gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
- };
-
- regulator@4 {
- compatible = "regulator-fixed";
- reg = <4>;
- regulator-name = "hdd4power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- startup-delay-us = <5000000>;
- gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&mdio {
- status = "okay";
-
- ethphy0: ethernet-phy@0 {
- device_type = "ethernet-phy";
- reg = <8>;
- };
-
- ethphy1: ethernet-phy@1 {
- device_type = "ethernet-phy";
- reg = <9>;
- };
-};
-
-ð0 {
- status = "okay";
-
- ethernet0-port@0 {
- phy-handle = <ðphy0>;
- };
-};
-
-ð1 {
- status = "disabled";
-
- ethernet1-port@0 {
- phy-handle = <ðphy1>;
- };
-};
-
-&pciec {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/include/ "skeleton.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
-
-/ {
- compatible = "marvell,kirkwood";
- interrupt-parent = <&intc>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "marvell,feroceon";
- reg = <0>;
- clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>;
- clock-names = "cpu_clk", "ddrclk", "powersave";
- };
- };
-
- aliases {
- gpio0 = &gpio0;
- gpio1 = &gpio1;
- i2c0 = &i2c0;
- };
-
- mbus@f1000000 {
- compatible = "marvell,kirkwood-mbus", "simple-bus";
- #address-cells = <2>;
- #size-cells = <1>;
- /* If a board file needs to change this ranges it must replace it completely */
- ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 /* internal-regs */
- MBUS_ID(0x01, 0x2f) 0 0xf4000000 0x10000 /* nand flash */
- MBUS_ID(0x03, 0x01) 0 0xf5000000 0x10000 /* crypto sram */
- >;
- controller = <&mbusc>;
- pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */
- pcie-io-aperture = <0xf2000000 0x100000>; /* 1 MiB I/O space */
-
- nand: nand@12f {
- #address-cells = <1>;
- #size-cells = <1>;
- cle = <0>;
- ale = <1>;
- bank-width = <1>;
- compatible = "marvell,orion-nand";
- reg = <MBUS_ID(0x01, 0x2f) 0 0x400>;
- chip-delay = <25>;
- /* set partition map and/or chip-delay in board dts */
- clocks = <&gate_clk 7>;
- pinctrl-0 = <&pmx_nand>;
- pinctrl-names = "default";
- status = "disabled";
- };
-
- crypto_sram: sa-sram@301 {
- compatible = "mmio-sram";
- reg = <MBUS_ID(0x03, 0x01) 0x0 0x800>;
- clocks = <&gate_clk 17>;
- #address-cells = <1>;
- #size-cells = <1>;
- };
- };
-
- ocp@f1000000 {
- compatible = "simple-bus";
- ranges = <0x00000000 0xf1000000 0x0100000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- pinctrl: pin-controller@10000 {
- /* set compatible property in SoC file */
- reg = <0x10000 0x20>;
-
- pmx_ge1: pmx-ge1 {
- marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23",
- "mpp24", "mpp25", "mpp26", "mpp27",
- "mpp30", "mpp31", "mpp32", "mpp33";
- marvell,function = "ge1";
- };
-
- pmx_nand: pmx-nand {
- marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
- "mpp4", "mpp5", "mpp18", "mpp19";
- marvell,function = "nand";
- };
-
- /*
- * Default SPI0 pinctrl setting with CSn on mpp0,
- * overwrite marvell,pins on board level if required.
- */
- pmx_spi: pmx-spi {
- marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
- marvell,function = "spi";
- };
-
- pmx_twsi0: pmx-twsi0 {
- marvell,pins = "mpp8", "mpp9";
- marvell,function = "twsi0";
- };
-
- /*
- * Default UART pinctrl setting without RTS/CTS,
- * overwrite marvell,pins on board level if required.
- */
- pmx_uart0: pmx-uart0 {
- marvell,pins = "mpp10", "mpp11";
- marvell,function = "uart0";
- };
-
- pmx_uart1: pmx-uart1 {
- marvell,pins = "mpp13", "mpp14";
- marvell,function = "uart1";
- };
- };
-
- core_clk: core-clocks@10030 {
- compatible = "marvell,kirkwood-core-clock";
- reg = <0x10030 0x4>;
- #clock-cells = <1>;
- };
-
- spi0: spi@10600 {
- compatible = "marvell,orion-spi";
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- interrupts = <23>;
- reg = <0x10600 0x28>;
- clocks = <&gate_clk 7>;
- pinctrl-0 = <&pmx_spi>;
- pinctrl-names = "default";
- status = "disabled";
- };
-
- gpio0: gpio@10100 {
- compatible = "marvell,orion-gpio";
- #gpio-cells = <2>;
- gpio-controller;
- reg = <0x10100 0x40>;
- ngpios = <32>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <35>, <36>, <37>, <38>;
- clocks = <&gate_clk 7>;
- };
-
- gpio1: gpio@10140 {
- compatible = "marvell,orion-gpio";
- #gpio-cells = <2>;
- gpio-controller;
- reg = <0x10140 0x40>;
- ngpios = <18>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <39>, <40>, <41>;
- clocks = <&gate_clk 7>;
- };
-
- i2c0: i2c@11000 {
- compatible = "marvell,mv64xxx-i2c";
- reg = <0x11000 0x20>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <29>;
- clock-frequency = <100000>;
- clocks = <&gate_clk 7>;
- pinctrl-0 = <&pmx_twsi0>;
- pinctrl-names = "default";
- status = "disabled";
- };
-
- uart0: serial@12000 {
- compatible = "ns16550a";
- reg = <0x12000 0x100>;
- reg-shift = <2>;
- interrupts = <33>;
- clocks = <&gate_clk 7>;
- pinctrl-0 = <&pmx_uart0>;
- pinctrl-names = "default";
- status = "disabled";
- };
-
- uart1: serial@12100 {
- compatible = "ns16550a";
- reg = <0x12100 0x100>;
- reg-shift = <2>;
- interrupts = <34>;
- clocks = <&gate_clk 7>;
- pinctrl-0 = <&pmx_uart1>;
- pinctrl-names = "default";
- status = "disabled";
- };
-
- mbusc: mbus-controller@20000 {
- compatible = "marvell,mbus-controller";
- reg = <0x20000 0x80>, <0x1500 0x20>;
- };
-
- sysc: system-controller@20000 {
- compatible = "marvell,orion-system-controller";
- reg = <0x20000 0x120>;
- };
-
- bridge_intc: bridge-interrupt-ctrl@20110 {
- compatible = "marvell,orion-bridge-intc";
- interrupt-controller;
- #interrupt-cells = <1>;
- reg = <0x20110 0x8>;
- interrupts = <1>;
- marvell,#interrupts = <6>;
- };
-
- gate_clk: clock-gating-control@2011c {
- compatible = "marvell,kirkwood-gating-clock";
- reg = <0x2011c 0x4>;
- clocks = <&core_clk 0>;
- #clock-cells = <1>;
- };
-
- l2: l2-cache@20128 {
- compatible = "marvell,kirkwood-cache";
- reg = <0x20128 0x4>;
- };
-
- intc: main-interrupt-ctrl@20200 {
- compatible = "marvell,orion-intc";
- interrupt-controller;
- #interrupt-cells = <1>;
- reg = <0x20200 0x10>, <0x20210 0x10>;
- };
-
- timer: timer@20300 {
- compatible = "marvell,orion-timer";
- reg = <0x20300 0x20>;
- interrupt-parent = <&bridge_intc>;
- interrupts = <1>, <2>;
- clocks = <&core_clk 0>;
- };
-
- wdt: watchdog-timer@20300 {
- compatible = "marvell,orion-wdt";
- reg = <0x20300 0x28>, <0x20108 0x4>;
- interrupt-parent = <&bridge_intc>;
- interrupts = <3>;
- clocks = <&gate_clk 7>;
- status = "okay";
- };
-
- cesa: crypto@30000 {
- compatible = "marvell,kirkwood-crypto";
- reg = <0x30000 0x10000>;
- reg-names = "regs";
- interrupts = <22>;
- clocks = <&gate_clk 17>;
- marvell,crypto-srams = <&crypto_sram>;
- marvell,crypto-sram-size = <0x800>;
- status = "okay";
- };
-
- usb0: ehci@50000 {
- compatible = "marvell,orion-ehci";
- reg = <0x50000 0x1000>;
- interrupts = <19>;
- clocks = <&gate_clk 3>;
- status = "okay";
- };
-
- dma0: xor@60800 {
- compatible = "marvell,orion-xor";
- reg = <0x60800 0x100
- 0x60A00 0x100>;
- status = "okay";
- clocks = <&gate_clk 8>;
-
- xor00 {
- interrupts = <5>;
- dmacap,memcpy;
- dmacap,xor;
- };
- xor01 {
- interrupts = <6>;
- dmacap,memcpy;
- dmacap,xor;
- dmacap,memset;
- };
- };
-
- dma1: xor@60900 {
- compatible = "marvell,orion-xor";
- reg = <0x60900 0x100
- 0x60B00 0x100>;
- status = "okay";
- clocks = <&gate_clk 16>;
-
- xor00 {
- interrupts = <7>;
- dmacap,memcpy;
- dmacap,xor;
- };
- xor01 {
- interrupts = <8>;
- dmacap,memcpy;
- dmacap,xor;
- dmacap,memset;
- };
- };
-
- eth0: ethernet-controller@72000 {
- compatible = "marvell,kirkwood-eth";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x72000 0x4000>;
- clocks = <&gate_clk 0>;
- marvell,tx-checksum-limit = <1600>;
- status = "disabled";
-
- eth0port: ethernet0-port@0 {
- compatible = "marvell,kirkwood-eth-port";
- reg = <0>;
- interrupts = <11>;
- /* overwrite MAC address in bootloader */
- local-mac-address = [00 00 00 00 00 00];
- /* set phy-handle property in board file */
- };
- };
-
- mdio: mdio-bus@72004 {
- compatible = "marvell,orion-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x72004 0x84>;
- interrupts = <46>;
- clocks = <&gate_clk 0>;
- status = "disabled";
-
- /* add phy nodes in board file */
- };
-
- eth1: ethernet-controller@76000 {
- compatible = "marvell,kirkwood-eth";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x76000 0x4000>;
- clocks = <&gate_clk 19>;
- marvell,tx-checksum-limit = <1600>;
- pinctrl-0 = <&pmx_ge1>;
- pinctrl-names = "default";
- status = "disabled";
-
- eth1port: ethernet1-port@0 {
- compatible = "marvell,kirkwood-eth-port";
- reg = <0>;
- interrupts = <15>;
- /* overwrite MAC address in bootloader */
- local-mac-address = [00 00 00 00 00 00];
- /* set phy-handle property in board file */
- };
- };
-
- sata_phy0: sata-phy@82000 {
- compatible = "marvell,mvebu-sata-phy";
- reg = <0x82000 0x0334>;
- clocks = <&gate_clk 14>;
- clock-names = "sata";
- #phy-cells = <0>;
- status = "ok";
- };
-
- sata_phy1: sata-phy@84000 {
- compatible = "marvell,mvebu-sata-phy";
- reg = <0x84000 0x0334>;
- clocks = <&gate_clk 15>;
- clock-names = "sata";
- #phy-cells = <0>;
- status = "ok";
- };
-
- audio0: audio-controller@a0000 {
- compatible = "marvell,kirkwood-audio";
- #sound-dai-cells = <0>;
- reg = <0xa0000 0x2210>;
- interrupts = <24>;
- clocks = <&gate_clk 9>;
- clock-names = "internal";
- status = "disabled";
- };
- };
-};
projects / u-boot.git / commitdiff