return 0;
}
-#define SPI_EEPROM_READ 0x03
#define MAX_SPI_BYTES 0x20
-#define EE_OFF_MAC1 0x13
-#define EE_OFF_MAC2 0x19
+#define EE_OFF_MAC1 0x10
+#define EE_OFF_MAC2 0x16
/* Reads MAC addresses from SPI EEPROM */
static int setup_mac(void)
{
- struct udevice *eeprom;
- struct spi_slave *slave;
- char name[30], *str;
uchar din[MAX_SPI_BYTES];
- uchar dout[MAX_SPI_BYTES] = {SPI_EEPROM_READ, 0, 0};
- int bitlen = 256, cs = 0, mode = 0, bus = 0, ret;
+ int ret;
unsigned long ident = 0x08005120;
- snprintf(name, sizeof(name), "generic_%d:%d", bus, cs);
-
- str = strdup(name);
- if (!str)
- return -1;
-
- ret = uclass_get_device(UCLASS_SPI, 0, &eeprom);
- if (ret) {
- printf("Could not enable Serial Peripheral Interface (SPI).\n");
- return -1;
- }
-
- ret = _spi_get_bus_and_cs(bus, cs, 1000000, mode, "spi_generic_drv", str, &eeprom, &slave);
+ ret = read_eeprom(din, sizeof(din));
if (ret)
return ret;
- ret = spi_claim_bus(slave);
-
- ret = spi_xfer(slave, bitlen, dout, din, SPI_XFER_BEGIN | SPI_XFER_END);
- if (ret) {
- printf("Error %d during SPI transaction\n", ret);
- return ret;
- }
-
if (memcmp(din + EE_OFF_MAC1, &ident, sizeof(ident)) == 0)
eth_env_set_enetaddr("ethaddr", din + EE_OFF_MAC1);
if (memcmp(din + EE_OFF_MAC2, &ident, sizeof(ident)) == 0)
eth_env_set_enetaddr("eth1addr", din + EE_OFF_MAC2);
- spi_release_bus(slave);
-
return 0;
}
* Common specific routines for the CS Group boards
*/
+#include <dm.h>
#include <fdt_support.h>
+#include <spi.h>
+
+#define SPI_EEPROM_READ 0x03
static int fdt_set_node_and_value(void *blob, char *node, const char *prop,
void *var, int size)
fdt_set_node_and_value(blob, "/", prop, &id, sizeof(uint32_t));
}
+
+int read_eeprom(u8 *din, int len)
+{
+ struct udevice *eeprom;
+ struct spi_slave *slave;
+ uchar dout[3] = {SPI_EEPROM_READ, 0, 0};
+ int ret;
+
+ ret = uclass_get_device(UCLASS_SPI, 0, &eeprom);
+ if (ret)
+ return ret;
+
+ ret = _spi_get_bus_and_cs(0, 0, 1000000, 0, "spi_generic_drv",
+ "generic_0:0", &eeprom, &slave);
+ if (ret)
+ return ret;
+
+ ret = spi_claim_bus(slave);
+
+ ret = spi_xfer(slave, sizeof(dout) << 3, dout, NULL, SPI_XFER_BEGIN);
+ if (ret)
+ return ret;
+
+ ret = spi_xfer(slave, len << 3, NULL, din, SPI_XFER_END);
+ if (ret)
+ return ret;
+
+ spi_release_bus(slave);
+
+ return 0;
+}