mx6: ddr: add routine to return DDR calibration data

Add routine mmdc_read_calibration() to return the output of DDR
calibration. This can be used for debugging or to aid in construction
of static memory configuration.

This routine will be used in a subsequent patch set adding a virtual
"mx6memcal" board, but could also be useful when gathering statistics
during an initial production run.

Signed-off-by: Eric Nelson <eric@nelint.com>

diff --git a/arch/arm/cpu/armv7/mx6/ddr.c b/arch/arm/cpu/armv7/mx6/ddr.c
index 274a0ba357dd76962debb31545235d8072d8ff24..b12fb64f2ee236d840bd40f46bd1b1a90cbd0654 100644 (file)
--- a/arch/arm/cpu/armv7/mx6/ddr.c
+++ b/arch/arm/cpu/armv7/mx6/ddr.c
@@ -1501,6 +1501,29 @@ void mx6_ddr3_cfg(const struct mx6_ddr_sysinfo *sysinfo,
        mdelay(1);
 }
 
+void mmdc_read_calibration(struct mx6_ddr_sysinfo const *sysinfo,
+                           struct mx6_mmdc_calibration *calib)
+{
+       struct mmdc_p_regs *mmdc0 = (struct mmdc_p_regs *)MMDC_P0_BASE_ADDR;
+       struct mmdc_p_regs *mmdc1 = (struct mmdc_p_regs *)MMDC_P1_BASE_ADDR;
+
+       calib->p0_mpwldectrl0 = readl(&mmdc0->mpwldectrl0);
+       calib->p0_mpwldectrl1 = readl(&mmdc0->mpwldectrl1);
+       calib->p0_mpdgctrl0 = readl(&mmdc0->mpdgctrl0);
+       calib->p0_mpdgctrl1 = readl(&mmdc0->mpdgctrl1);
+       calib->p0_mprddlctl = readl(&mmdc0->mprddlctl);
+       calib->p0_mpwrdlctl = readl(&mmdc0->mpwrdlctl);
+
+       if (sysinfo->dsize == 2) {
+               calib->p1_mpwldectrl0 = readl(&mmdc1->mpwldectrl0);
+               calib->p1_mpwldectrl1 = readl(&mmdc1->mpwldectrl1);
+               calib->p1_mpdgctrl0 = readl(&mmdc1->mpdgctrl0);
+               calib->p1_mpdgctrl1 = readl(&mmdc1->mpdgctrl1);
+               calib->p1_mprddlctl = readl(&mmdc1->mprddlctl);
+               calib->p1_mpwrdlctl = readl(&mmdc1->mpwrdlctl);
+       }
+}
+
 void mx6_dram_cfg(const struct mx6_ddr_sysinfo *sysinfo,
                  const struct mx6_mmdc_calibration *calib,
                  const void *ddr_cfg)

diff --git a/arch/arm/include/asm/arch-mx6/mx6-ddr.h b/arch/arm/include/asm/arch-mx6/mx6-ddr.h
index cd5bc9768e48e1061c2b17d7ea9a3e0f5e42b1de..12454fa7c555ef9fda7debd76f9144b57ad7bbd9 100644 (file)
--- a/arch/arm/include/asm/arch-mx6/mx6-ddr.h
+++ b/arch/arm/include/asm/arch-mx6/mx6-ddr.h
@@ -461,6 +461,8 @@ void mx6sl_dram_iocfg(unsigned width,
 #if defined(CONFIG_MX6QDL) || defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
 int mmdc_do_write_level_calibration(struct mx6_ddr_sysinfo const *sysinfo);
 int mmdc_do_dqs_calibration(struct mx6_ddr_sysinfo const *sysinfo);
+void mmdc_read_calibration(struct mx6_ddr_sysinfo const *sysinfo,
+                           struct mx6_mmdc_calibration *calib);
 #endif
 
 /* configure mx6 mmdc registers */