rockchip: dts: rk3399-puma: replace 'rockchip, vbus-gpio' with fixed regulator

On the RK3399-Q7, we need to turn on the on-module USB hub before using the
USB host interfaces (only the OTG interface is directly connected to the edge
connector).  This drops the deprecated 'rockchip,vbus-gpio' property and uses
a fixed regulator to turn on the USB hub.

References: 26a8b80 "usb: host: xhci-rockchip: use fixed regulator to control vbus"
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi
index dd1baea70407c188e934dd284212b7369357c8ed..a04878e223c007c1749e659a70f0be79fa6b281b 100644 (file)
--- a/arch/arm/dts/rk3399-puma.dtsi
+++ b/arch/arm/dts/rk3399-puma.dtsi
@@ -89,6 +89,17 @@
                };
        };
 
+       usbhub_enable: usbhub_enable {
+               compatible = "regulator-fixed";
+               regulator-name = "usbhub_enable";
+               enable-active-low;
+               gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+               regulator-always-on;
+               regulator-boot-on;
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+       };
+
        vccadc_ref: vccadc-ref {
                compatible = "regulator-fixed";
                regulator-name = "vcc1v8_sys";
@@ -514,7 +525,6 @@
 };
 
 &dwc3_typec1 {
-       rockchip,vbus-gpio = <&gpio4 3 GPIO_ACTIVE_LOW>;
        status = "okay";
 };