]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
phy: zynqmp: Add support for sata and DP phy initialization
authorMichal Simek <michal.simek@xilinx.com>
Mon, 7 Feb 2022 09:36:32 +0000 (10:36 +0100)
committerMichal Simek <michal.simek@xilinx.com>
Tue, 15 Feb 2022 12:04:28 +0000 (13:04 +0100)
DP is untested but just c&p from Linux driver. Sata is tested on kv260-revA
board which has SATA connector populated.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/d231610160e76a2ad1b4a163e0e8db0ddc4733e2.1644226590.git.michal.simek@xilinx.com
drivers/phy/phy-zynqmp.c

index 9dc3d426a3d34ed9fef3493b96f939fef16d0e20..08c1b6efcfdcd4ac24bff23062544385e25e4bdd 100644 (file)
@@ -373,6 +373,29 @@ static void xpsgtr_bypass_scrambler_8b10b(struct xpsgtr_phy *gtr_phy)
        xpsgtr_write_phy(gtr_phy, L0_TX_DIG_61, L0_TM_DISABLE_SCRAMBLE_ENCODER);
 }
 
+/* DP-specific initialization. */
+static void xpsgtr_phy_init_dp(struct xpsgtr_phy *gtr_phy)
+{
+       xpsgtr_write_phy(gtr_phy, L0_TXPMD_TM_45,
+                        L0_TXPMD_TM_45_OVER_DP_MAIN |
+                        L0_TXPMD_TM_45_ENABLE_DP_MAIN |
+                        L0_TXPMD_TM_45_OVER_DP_POST1 |
+                        L0_TXPMD_TM_45_OVER_DP_POST2 |
+                        L0_TXPMD_TM_45_ENABLE_DP_POST2);
+       xpsgtr_write_phy(gtr_phy, L0_TX_ANA_TM_118,
+                        L0_TX_ANA_TM_118_FORCE_17_0);
+}
+
+/* SATA-specific initialization. */
+static void xpsgtr_phy_init_sata(struct xpsgtr_phy *gtr_phy)
+{
+       struct xpsgtr_dev *gtr_dev = gtr_phy->dev;
+
+       xpsgtr_bypass_scrambler_8b10b(gtr_phy);
+
+       writel(gtr_phy->lane, gtr_dev->siou + SATA_CONTROL_OFFSET);
+}
+
 /* SGMII-specific initialization. */
 static void xpsgtr_phy_init_sgmii(struct xpsgtr_phy *gtr_phy)
 {
@@ -427,9 +450,12 @@ static int xpsgtr_init(struct phy *x)
        case ICM_PROTOCOL_SGMII:
                xpsgtr_phy_init_sgmii(gtr_phy);
                break;
-       case ICM_PROTOCOL_DP:
        case ICM_PROTOCOL_SATA:
-               return -EINVAL;
+               xpsgtr_phy_init_sata(gtr_phy);
+               break;
+       case ICM_PROTOCOL_DP:
+               xpsgtr_phy_init_dp(gtr_phy);
+               break;
        }
 
        dev_dbg(gtr_dev->dev, "lane %u (type %u, protocol %u): init done\n",