binman conversion made flashing flash.bin
and u-boot.itb necessary. Update binman config
to create a single flash.bin image again.
This updates imx8mp_evk and phyCORE-i.MX8MP as they share the
same binman config.
Updated also imx8mp_evk documentation.
Tested on phyCORE-i.MX8MP.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
};
};
- flash {
+ spl {
+ filename = "spl.bin";
+
mkimage {
args = "-n spl/u-boot-spl.cfgout -T imx8mimage -e 0x920000";
};
};
};
+
+ imx-boot {
+ filename = "flash.bin";
+ pad-byte = <0x00>;
+
+ spl: blob-ext@1 {
+ filename = "spl.bin";
+ offset = <0x0>;
+ };
+
+ uboot: blob-ext@2 {
+ filename = "u-boot.itb";
+ offset = <0x58000>;
+ };
+ };
};
ROM_VERSION v2
BOOT_FROM sd
-LOADER mkimage.flash.mkimage 0x920000
+LOADER u-boot-spl-ddr.bin 0x920000
ROM_VERSION v2
BOOT_FROM sd
-LOADER mkimage.flash.mkimage 0x920000
+LOADER u-boot-spl-ddr.bin 0x920000
.. code-block:: bash
$sudo dd if=build/flash.bin of=/dev/sd[x] bs=1K seek=32 conv=notrunc; sync
- $sudo dd if=build/u-boot.itb of=/dev/sd[x] bs=1K seek=384 conv=notrunc; sync
Boot
----