fpga: ACEX1K: Use logging feature instead of FPGA_DEBUG

Instead of using DEBUG or LOG_DEBUG the driver still had its own
definition for debug output.

Signed-off-by: Alexander Dahl <ada@thorsis.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20221007122003.11239-8-ada@thorsis.com

diff --git a/drivers/fpga/ACEX1K.c b/drivers/fpga/ACEX1K.c
index aca8049c56ac5ce19782d8a45a619a9349a8617d..a1ff47035be389efd8ed338ed27a694d28a6b492 100644 (file)
--- a/drivers/fpga/ACEX1K.c
+++ b/drivers/fpga/ACEX1K.c
@@ -7,18 +7,14 @@
  * Rich Ireland, Enterasys Networks, rireland@enterasys.com.
  */
 
+#define LOG_CATEGORY UCLASS_FPGA
+
 #include <common.h>            /* core U-Boot definitions */
 #include <console.h>
+#include <log.h>
 #include <ACEX1K.h>            /* ACEX device family */
 #include <linux/delay.h>
 
-/* Define FPGA_DEBUG to get debug printf's */
-#ifdef FPGA_DEBUG
-#define PRINTF(fmt,args...)    printf (fmt ,##args)
-#else
-#define PRINTF(fmt,args...)
-#endif
-
 /* Note: The assumption is that we cannot possibly run fast enough to
  * overrun the device (the Slave Parallel mode can free run at 50MHz).
  * If there is a need to operate slower, define CONFIG_FPGA_DELAY in
@@ -44,7 +40,7 @@ int ACEX1K_load(Altera_desc *desc, const void *buf, size_t bsize)
 
        switch (desc->iface) {
        case passive_serial:
-               PRINTF ("%s: Launching Passive Serial Loader\n", __FUNCTION__);
+               log_debug("Launching Passive Serial Loader\n");
                ret_val = ACEX1K_ps_load (desc, buf, bsize);
                break;
 
@@ -64,7 +60,7 @@ int ACEX1K_dump(Altera_desc *desc, const void *buf, size_t bsize)
 
        switch (desc->iface) {
        case passive_serial:
-               PRINTF ("%s: Launching Passive Serial Dump\n", __FUNCTION__);
+               log_debug("Launching Passive Serial Dump\n");
                ret_val = ACEX1K_ps_dump (desc, buf, bsize);
                break;
 
@@ -93,8 +89,7 @@ static int ACEX1K_ps_load(Altera_desc *desc, const void *buf, size_t bsize)
        Altera_ACEX1K_Passive_Serial_fns *fn = desc->iface_fns;
        int i;
 
-       PRINTF ("%s: start with interface functions @ 0x%p\n",
-                       __FUNCTION__, fn);
+       log_debug("start with interface functions @ 0x%p\n", fn);
 
        if (fn) {
                size_t bytecount = 0;
@@ -102,16 +97,16 @@ static int ACEX1K_ps_load(Altera_desc *desc, const void *buf, size_t bsize)
                int cookie = desc->cookie;      /* make a local copy */
                unsigned long ts;               /* timestamp */
 
-               PRINTF ("%s: Function Table:\n"
-                               "ptr:\t0x%p\n"
-                               "struct: 0x%p\n"
-                               "config:\t0x%p\n"
-                               "status:\t0x%p\n"
-                               "clk:\t0x%p\n"
-                               "data:\t0x%p\n"
-                               "done:\t0x%p\n\n",
-                               __FUNCTION__, &fn, fn, fn->config, fn->status,
-                               fn->clk, fn->data, fn->done);
+               log_debug("Function Table:\n"
+                         "ptr:\t0x%p\n"
+                         "struct: 0x%p\n"
+                         "config:\t0x%p\n"
+                         "status:\t0x%p\n"
+                         "clk:\t0x%p\n"
+                         "data:\t0x%p\n"
+                         "done:\t0x%p\n\n",
+                         &fn, fn, fn->config, fn->status,
+                         fn->clk, fn->data, fn->done);
 #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
                printf ("Loading FPGA Device %d...", cookie);
 #endif