]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
spi: spi_flash_probe_bus_cs() rely on DT for spi speed and mode
authorPatrice Chotard <patrice.chotard@foss.st.com>
Wed, 30 Mar 2022 07:33:14 +0000 (09:33 +0200)
committerTom Rini <trini@konsulko.com>
Mon, 23 May 2022 13:33:10 +0000 (09:33 -0400)
Now, spi_flash_probe_bus_cs() relies on DT for spi speed and mode
and logically calls spi_get_bus_and_cs(). In case spi mode and speed are
not read from DT, make usage of spi_flash_probe() instead.

To sum-up:
 - Previous call tree was:
    spi_flash_probe() -> spi_flash_probe_bus_cs() -> spi_get_bus_and_cs()

 - Current call tree is:
    spi_flash_probe() -> _spi_get_bus_and_cs()
    spi_flash_probe_bus_cs() -> spi_get_bus_and_cs()

This patch impacts the following :
  - cmd/sf.c: if spi mode and/or speed is passed in argument of
    do_spi_flash_probe(), call spi_flash_probe() otherwise call
    spi_flash_probe_bus_cs().

  - drivers/net/fm/fm.c: as by default spi speed and mode was set to
    0 and a comment indicates that speed and mode are read from DT,
    use spi_flash_probe_bus_cs().

  - drivers/net/pfe_eth/pfe_firmware.c: spi speed and mode are not read
    from DT by all platforms using this driver, so keep legacy and replace
    spi_flash_probe_bus_cs() by spi_flash_probe();

  - drivers/net/sni_netsec.c : spi speed and mode are not read from DT,
    so replace spi_flash_probe_bus_cs() by spi_flash_probe().

  - drivers/usb/gadget/max3420_udc.c: Can't find any platform which make
    usage of this driver, nevertheless, keep legacy and replace
    spi_get_bus_and_cs() by _spi_get_bus_and_cs().

  - env/sf.c: a comment indicates that speed and mode are read
    from DT. So use spi_flash_probe_bus_cs().

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Marek Behun <marek.behun@nic.cz>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Vignesh R <vigneshr@ti.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stefan Roese <sr@denx.de>
Cc: "Pali Rohár" <pali@kernel.org>
Cc: Konstantin Porotchkin <kostap@marvell.com>
Cc: Igal Liberman <igall@marvell.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Pratyush Yadav <p.yadav@ti.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Anji J <anji.jagarlmudi@nxp.com>
Cc: Biwen Li <biwen.li@nxp.com>
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Cc: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
cmd/sf.c
drivers/mtd/spi/sf-uclass.c
drivers/net/fm/fm.c
drivers/net/pfe_eth/pfe_firmware.c
drivers/net/sni_netsec.c
env/sf.c
include/spi_flash.h

index 8bdebd9fd8fd23b0695db43bd593be8b5936e5a8..8713736b2a34d816c96cdde6bddd2f2085bd6a0a 100644 (file)
--- a/cmd/sf.c
+++ b/cmd/sf.c
@@ -91,6 +91,7 @@ static int do_spi_flash_probe(int argc, char *const argv[])
        unsigned int speed = CONFIG_SF_DEFAULT_SPEED;
        unsigned int mode = CONFIG_SF_DEFAULT_MODE;
        char *endp;
+       bool use_dt = true;
 #if CONFIG_IS_ENABLED(DM_SPI_FLASH)
        struct udevice *new, *bus_dev;
        int ret;
@@ -117,11 +118,13 @@ static int do_spi_flash_probe(int argc, char *const argv[])
                speed = simple_strtoul(argv[2], &endp, 0);
                if (*argv[2] == 0 || *endp != 0)
                        return -1;
+               use_dt = false;
        }
        if (argc >= 4) {
                mode = hextoul(argv[3], &endp);
                if (*argv[3] == 0 || *endp != 0)
                        return -1;
+               use_dt = false;
        }
 
 #if CONFIG_IS_ENABLED(DM_SPI_FLASH)
@@ -131,14 +134,18 @@ static int do_spi_flash_probe(int argc, char *const argv[])
                device_remove(new, DM_REMOVE_NORMAL);
        }
        flash = NULL;
-       ret = spi_flash_probe_bus_cs(bus, cs, speed, mode, &new);
-       if (ret) {
+       if (use_dt) {
+               spi_flash_probe_bus_cs(bus, cs, &new);
+               flash = dev_get_uclass_priv(new);
+       } else {
+               flash = spi_flash_probe(bus, cs, speed, mode);
+       }
+
+       if (!flash) {
                printf("Failed to initialize SPI flash at %u:%u (error %d)\n",
                       bus, cs, ret);
                return 1;
        }
-
-       flash = dev_get_uclass_priv(new);
 #else
        if (flash)
                spi_flash_free(flash);
index b45ba54ebf6afa52abf5f65378a91f4ade05c5b5..e6e650ef8c09d6d5d63f67ba257a50fc7645d91a 100644 (file)
@@ -46,25 +46,12 @@ int spl_flash_get_sw_write_prot(struct udevice *dev)
  * TODO(sjg@chromium.org): This is an old-style function. We should remove
  * it when all SPI flash drivers use dm
  */
-struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
+struct spi_flash *spi_flash_probe(unsigned int busnum, unsigned int cs,
                                  unsigned int max_hz, unsigned int spi_mode)
-{
-       struct udevice *dev;
-
-       if (spi_flash_probe_bus_cs(bus, cs, max_hz, spi_mode, &dev))
-               return NULL;
-
-       return dev_get_uclass_priv(dev);
-}
-
-int spi_flash_probe_bus_cs(unsigned int busnum, unsigned int cs,
-                          unsigned int max_hz, unsigned int spi_mode,
-                          struct udevice **devp)
 {
        struct spi_slave *slave;
        struct udevice *bus;
        char *str;
-       int ret;
 
 #if defined(CONFIG_SPL_BUILD) && CONFIG_IS_ENABLED(USE_TINY_PRINTF)
        str = "spi_flash";
@@ -74,8 +61,22 @@ int spi_flash_probe_bus_cs(unsigned int busnum, unsigned int cs,
        snprintf(name, sizeof(name), "spi_flash@%d:%d", busnum, cs);
        str = strdup(name);
 #endif
-       ret = _spi_get_bus_and_cs(busnum, cs, max_hz, spi_mode,
-                                 "jedec_spi_nor", str, &bus, &slave);
+
+       if (_spi_get_bus_and_cs(busnum, cs, max_hz, spi_mode,
+                               "jedec_spi_nor", str, &bus, &slave))
+               return NULL;
+
+       return dev_get_uclass_priv(slave->dev);
+}
+
+int spi_flash_probe_bus_cs(unsigned int busnum, unsigned int cs,
+                          struct udevice **devp)
+{
+       struct spi_slave *slave;
+       struct udevice *bus;
+       int ret;
+
+       ret = spi_get_bus_and_cs(busnum, cs, &bus, &slave);
        if (ret)
                return ret;
 
index f8256126405a56a7571a6bff00eaa85011b5b0f3..d0b492b5a1b7d33d67c29c575feb2f0c69943482 100644 (file)
@@ -388,7 +388,7 @@ int fm_init_common(int index, struct ccsr_fman *reg)
 
                /* speed and mode will be read from DT */
                ret = spi_flash_probe_bus_cs(CONFIG_SF_DEFAULT_BUS,
-                                            CONFIG_SF_DEFAULT_CS, 0, 0, &new);
+                                            CONFIG_SF_DEFAULT_CS, &new);
 
                ucode_flash = dev_get_uclass_priv(new);
 #else
@@ -475,7 +475,7 @@ int fm_init_common(int index, struct ccsr_fman *reg)
 
        /* speed and mode will be read from DT */
        ret = spi_flash_probe_bus_cs(CONFIG_SF_DEFAULT_BUS, CONFIG_SF_DEFAULT_CS,
-                                    0, 0, &new);
+                                    &new);
 
        ucode_flash = dev_get_uclass_priv(new);
 #else
index 6669048181e8627557a6c3a075b793e5c0a0ea46..82a4aa89a4d52be3ba26ea644f86d0bd02a5179f 100644 (file)
@@ -172,31 +172,20 @@ static int pfe_fit_check(void)
 int pfe_spi_flash_init(void)
 {
        struct spi_flash *pfe_flash;
-       struct udevice *new;
        int ret = 0;
        void *addr = malloc(CONFIG_SYS_LS_PFE_FW_LENGTH);
 
        if (!addr)
                return -ENOMEM;
 
-       ret = spi_flash_probe_bus_cs(CONFIG_SYS_FSL_PFE_SPI_BUS,
-                                    CONFIG_SYS_FSL_PFE_SPI_CS,
-                                    CONFIG_SYS_FSL_PFE_SPI_MAX_HZ,
-                                    CONFIG_SYS_FSL_PFE_SPI_MODE,
-                                    &new);
-       if (ret) {
-               printf("SF: failed to probe spi\n");
-               free(addr);
-               device_remove(new, DM_REMOVE_NORMAL);
-               return ret;
-       }
-
+       pfe_flash = spi_flash_probe(CONFIG_SYS_FSL_PFE_SPI_BUS,
+                                   CONFIG_SYS_FSL_PFE_SPI_CS,
+                                   CONFIG_SYS_FSL_PFE_SPI_MAX_HZ,
+                                   CONFIG_SYS_FSL_PFE_SPI_MODE);
 
-       pfe_flash = dev_get_uclass_priv(new);
        if (!pfe_flash) {
                printf("SF: probe for pfe failed\n");
                free(addr);
-               device_remove(new, DM_REMOVE_NORMAL);
                return -ENODEV;
        }
 
index 24caacf84706fce13df85836d1138435be70ebe7..9780f2092bd4de95d87282605ae69ac2cb0352dd 100644 (file)
@@ -621,12 +621,10 @@ static int netsec_stop_gmac(struct netsec_priv *priv)
 
 static void netsec_spi_read(char *buf, loff_t len, loff_t offset)
 {
-       struct udevice *new;
        struct spi_flash *flash;
 
-       spi_flash_probe_bus_cs(CONFIG_SF_DEFAULT_BUS, CONFIG_SF_DEFAULT_CS,
-                              CONFIG_SF_DEFAULT_SPEED, CONFIG_SF_DEFAULT_MODE, &new);
-       flash = dev_get_uclass_priv(new);
+       flash = spi_flash_probe(CONFIG_SF_DEFAULT_BUS, CONFIG_SF_DEFAULT_CS,
+                               CONFIG_SF_DEFAULT_SPEED, CONFIG_SF_DEFAULT_MODE);
 
        spi_flash_read(flash, offset, len, buf);
 }
index d2c07cd71687a4697f823e55d1f05672aa37c1c6..4b768542c14c0a7787c1528702a3838bd9bd43ec 100644 (file)
--- a/env/sf.c
+++ b/env/sf.c
@@ -48,7 +48,6 @@ static int setup_flash_device(struct spi_flash **env_flash)
 
        /* speed and mode will be read from DT */
        ret = spi_flash_probe_bus_cs(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
-                                    CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE,
                                     &new);
        if (ret) {
                env_set_default("spi_flash_probe_bus_cs() failed", 0);
index d33d0dd46adf716d26deb3f42018b28e3c19cf49..10d19fd4b1178d2a5c1f8e0b8deb73368125da5e 100644 (file)
@@ -102,7 +102,6 @@ int spl_flash_get_sw_write_prot(struct udevice *dev);
 int spi_flash_std_probe(struct udevice *dev);
 
 int spi_flash_probe_bus_cs(unsigned int busnum, unsigned int cs,
-                          unsigned int max_hz, unsigned int spi_mode,
                           struct udevice **devp);
 
 /* Compatibility function - this is the old U-Boot API */