]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
mmc: sdhci: Add support for sdhci-caps-mask
authorFaiz Abbas <faiz_abbas@ti.com>
Mon, 10 Jun 2019 19:13:34 +0000 (00:43 +0530)
committerTom Rini <trini@konsulko.com>
Wed, 17 Jul 2019 15:12:08 +0000 (11:12 -0400)
Add Support for masking some bits in the capabilities
register of a host controller.

Also remove the redundant readl() into caps1.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
drivers/mmc/sdhci.c

index c4e88790bc68e713c834871164ffa3a53114dc4f..742a54dacd9346452a4094739d9fe8aeee96a0ad 100644 (file)
@@ -8,6 +8,7 @@
  */
 
 #include <common.h>
+#include <dm.h>
 #include <errno.h>
 #include <malloc.h>
 #include <mmc.h>
@@ -681,8 +682,18 @@ int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host,
                u32 f_max, u32 f_min)
 {
        u32 caps, caps_1 = 0;
+#if CONFIG_IS_ENABLED(DM_MMC)
+       u32 mask[2] = {0};
+       int ret;
+       ret = dev_read_u32_array(host->mmc->dev, "sdhci-caps-mask",
+                                mask, 2);
+       if (ret && ret != -1)
+               return ret;
 
+       caps = ~mask[1] & sdhci_readl(host, SDHCI_CAPABILITIES);
+#else
        caps = sdhci_readl(host, SDHCI_CAPABILITIES);
+#endif
 
 #ifdef CONFIG_MMC_SDHCI_SDMA
        if (!(caps & SDHCI_CAN_DO_SDMA)) {
@@ -722,7 +733,11 @@ int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host,
 
        /* Check whether the clock multiplier is supported or not */
        if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) {
+#if CONFIG_IS_ENABLED(DM_MMC)
+               caps_1 = ~mask[0] & sdhci_readl(host, SDHCI_CAPABILITIES_1);
+#else
                caps_1 = sdhci_readl(host, SDHCI_CAPABILITIES_1);
+#endif
                host->clk_mul = (caps_1 & SDHCI_CLOCK_MUL_MASK) >>
                                SDHCI_CLOCK_MUL_SHIFT;
        }
@@ -779,9 +794,6 @@ int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host,
                cfg->host_caps &= ~MMC_MODE_HS_52MHz;
        }
 
-       if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300)
-               caps_1 = sdhci_readl(host, SDHCI_CAPABILITIES_1);
-
        if (!(cfg->voltages & MMC_VDD_165_195) ||
            (host->quirks & SDHCI_QUIRK_NO_1_8_V))
                caps_1 &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 |