armv8/ls2085ardb: Enable NAND SPL support

Enable NAND boot support using SPL framework. To boot from
NAND, either use DIP switches on board, or "qixis_reset nand"
command. Details of forming NAND image can be found in README.

Signed-off-by: Scott Wood <scottwood@freescale.com>
[York Sun: Remove +S from defconfig after commit 252ed872]
Signed-off-by: York Sun <yorksun@freescale.com>

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 4b7761d9395da0a60f68be7b93492f840cc76a85..844b862e64925b3ccfb12d31a100e4aa92dfe319 100644 (file)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -726,6 +726,7 @@ config TARGET_LS2085ARDB
        bool "Support ls2085ardb"
        select ARM64
        select ARMV8_MULTIENTRY
+       select SUPPORT_SPL
        help
          Support for Freescale LS2085ARDB platform.
          The LS2085A Reference design board (RDB) is a high-performance

diff --git a/arch/arm/cpu/armv8/fsl-lsch3/README b/arch/arm/cpu/armv8/fsl-lsch3/README
index 15a1549e564c70b684b84d7a8cb279a0991c24e7..37f07fbb76e78549cd633cab5a7b1b0b1a8dd562 100644 (file)
--- a/arch/arm/cpu/armv8/fsl-lsch3/README
+++ b/arch/arm/cpu/armv8/fsl-lsch3/README
@@ -133,3 +133,16 @@ The u-boot image should be written to match SRC_ADDR, in above example 0x20000.
 nand write <u-boot image in memory> 200000 <size of u-boot image>
 
 With these two images in NAND device, the board can boot from NAND.
+
+Another example for RDB boards,
+
+1) CCSR 4-byte write to 0x00e00404, data=0x00000000
+2) CCSR 4-byte write to 0x00e00400, data=0x1800a000
+3) Block Copy: SRC=0x0119, SRC_ADDR=0x00080000, DEST_ADDR=0x1800a000,
+BLOCK_SIZE=0x00014000
+
+nand write <rcw image in memory> 0 <size of rcw image>
+nand write <u-boot image in memory> 80000 <size of u-boot image>
+
+Notice the difference from QDS is SRC, SRC_ADDR and the offset of u-boot image
+to match board NAND device with 4KB/page, block size 512KB.

diff --git a/board/freescale/ls2085ardb/MAINTAINERS b/board/freescale/ls2085ardb/MAINTAINERS
index 436039ffdeda725b06548078230fdbbeae35c64e..d5cce40b2122560eeeab295b908ca6c73a5881bc 100644 (file)
--- a/board/freescale/ls2085ardb/MAINTAINERS
+++ b/board/freescale/ls2085ardb/MAINTAINERS
@@ -5,3 +5,4 @@ F:      board/freescale/ls2085ardb/
 F:     board/freescale/ls2085a/ls2085ardb.c
 F:     include/configs/ls2085ardb.h
 F:     configs/ls2085ardb_defconfig
+F:     configs/ls2085ardb_nand_defconfig

diff --git a/board/freescale/ls2085ardb/ddr.c b/board/freescale/ls2085ardb/ddr.c
index 6cd5e8bb23348a6c00de0a999b8b2702ff9b9785..8d71ae12646a0594466857c709d1ecbe9961cf21 100644 (file)
--- a/board/freescale/ls2085ardb/ddr.c
+++ b/board/freescale/ls2085ardb/ddr.c
@@ -147,9 +147,13 @@ phys_size_t initdram(int board_type)
 {
        phys_size_t dram_size;
 
+#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)
+       return fsl_ddr_sdram_size();
+#else
        puts("Initializing DDR....using SPD\n");
 
        dram_size = fsl_ddr_sdram();
+#endif
 
        return dram_size;
 }

diff --git a/configs/ls2085ardb_nand_defconfig b/configs/ls2085ardb_nand_defconfig
new file mode 100644 (file)
index 0000000..74812f7
--- /dev/null
+++ b/configs/ls2085ardb_nand_defconfig
@@ -0,0 +1,4 @@
+CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,NAND"
+CONFIG_SPL=y
+CONFIG_ARM=y
+CONFIG_TARGET_LS2085ARDB=y

diff --git a/include/configs/ls2085ardb.h b/include/configs/ls2085ardb.h
index 9c6f3ed5d7f6660ef70379047c0e549f72688a36..89dbf63d458895459f620bdcafc27589f963ce79 100644 (file)
--- a/include/configs/ls2085ardb.h
+++ b/include/configs/ls2085ardb.h
@@ -139,11 +139,13 @@ unsigned long get_board_sys_clk(void);
 #define QIXIS_LBMAP_SHIFT              0
 #define QIXIS_LBMAP_DFLTBANK           0x00
 #define QIXIS_LBMAP_ALTBANK            0x04
+#define QIXIS_LBMAP_NAND               0x09
 #define QIXIS_RST_CTL_RESET            0x31
 #define QIXIS_RST_CTL_RESET_EN         0x30
 #define QIXIS_RCFG_CTL_RECONFIG_IDLE   0x20
 #define QIXIS_RCFG_CTL_RECONFIG_START  0x21
 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE  0x08
+#define QIXIS_RCW_SRC_NAND             0x119
 #define        QIXIS_RST_FORCE_MEM             0x01
 
 #define CONFIG_SYS_CSPR3_EXT   (0x0)
@@ -169,6 +171,33 @@ unsigned long get_board_sys_clk(void);
                                        FTIM2_GPCM_TWP(0x3E))
 #define CONFIG_SYS_CS3_FTIM3           0x0
 
+#if defined(CONFIG_SPL) && defined(CONFIG_NAND)
+#define CONFIG_SYS_CSPR2_EXT           CONFIG_SYS_NOR0_CSPR_EXT
+#define CONFIG_SYS_CSPR2               CONFIG_SYS_NOR0_CSPR_EARLY
+#define CONFIG_SYS_CSPR2_FINAL         CONFIG_SYS_NOR0_CSPR
+#define CONFIG_SYS_AMASK2              CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR2               CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS2_FTIM0           CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS2_FTIM1           CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS2_FTIM2           CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS2_FTIM3           CONFIG_SYS_NOR_FTIM3
+#define CONFIG_SYS_CSPR0_EXT           CONFIG_SYS_NAND_CSPR_EXT
+#define CONFIG_SYS_CSPR0               CONFIG_SYS_NAND_CSPR
+#define CONFIG_SYS_AMASK0              CONFIG_SYS_NAND_AMASK
+#define CONFIG_SYS_CSOR0               CONFIG_SYS_NAND_CSOR
+#define CONFIG_SYS_CS0_FTIM0           CONFIG_SYS_NAND_FTIM0
+#define CONFIG_SYS_CS0_FTIM1           CONFIG_SYS_NAND_FTIM1
+#define CONFIG_SYS_CS0_FTIM2           CONFIG_SYS_NAND_FTIM2
+#define CONFIG_SYS_CS0_FTIM3           CONFIG_SYS_NAND_FTIM3
+
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET              (2048 * 1024)
+#define CONFIG_ENV_SECT_SIZE           0x20000
+#define CONFIG_ENV_SIZE                        0x2000
+#define CONFIG_SPL_PAD_TO              0x80000
+#define CONFIG_SYS_NAND_U_BOOT_OFFS    (1024 * 1024)
+#define CONFIG_SYS_NAND_U_BOOT_SIZE    (512 * 1024)
+#else
 #define CONFIG_SYS_CSPR0_EXT           CONFIG_SYS_NOR0_CSPR_EXT
 #define CONFIG_SYS_CSPR0               CONFIG_SYS_NOR0_CSPR_EARLY
 #define CONFIG_SYS_CSPR0_FINAL         CONFIG_SYS_NOR0_CSPR
@@ -187,6 +216,12 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_CS2_FTIM2           CONFIG_SYS_NAND_FTIM2
 #define CONFIG_SYS_CS2_FTIM3           CONFIG_SYS_NAND_FTIM3
 
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_ADDR                        (CONFIG_SYS_FLASH_BASE + 0x200000)
+#define CONFIG_ENV_SECT_SIZE           0x20000
+#define CONFIG_ENV_SIZE                        0x2000
+#endif
+
 /* Debug Server firmware */
 #define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR
 #define CONFIG_SYS_DEBUG_SERVER_FW_ADDR        0x580D00000ULL
@@ -229,11 +264,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR                        (CONFIG_SYS_FLASH_BASE + 0x200000)
-#define CONFIG_ENV_SECT_SIZE           0x20000
-#define CONFIG_ENV_SIZE                        0x2000
-
 #define CONFIG_FSL_MEMAC
 #define CONFIG_PCI             /* Enable PCIE */
 #define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */