]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
firmware: ti_sci: Add support for firewall management
authorAndrew F. Davis <afd@ti.com>
Fri, 12 Apr 2019 16:54:43 +0000 (12:54 -0400)
committerTom Rini <trini@konsulko.com>
Fri, 26 Apr 2019 21:51:51 +0000 (17:51 -0400)
TI-SCI message protocol provides support for controlling the firewall
configurations available in SoC.

Introduce support for the set of TI-SCI message protocol APIs that
provide us with this capability of controlling firewalls.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Andreas Dannenberg <dannenberg@ti.com>
drivers/firmware/ti_sci.c
drivers/firmware/ti_sci.h
include/linux/soc/ti/ti_sci_protocol.h

index d47d22fff3e4661e36bbbd876f1cd10815257411..44bbeb66c2d6da6eeb15794287d0ebc8a6afb83b 100644 (file)
@@ -2428,6 +2428,178 @@ fail:
        return ret;
 }
 
+/**
+ * ti_sci_cmd_set_fwl_region() - Request for configuring a firewall region
+ * @handle:    pointer to TI SCI handle
+ * @region:    region configuration parameters
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_set_fwl_region(const struct ti_sci_handle *handle,
+                                    const struct ti_sci_msg_fwl_region *region)
+{
+       struct ti_sci_msg_fwl_set_firewall_region_req req;
+       struct ti_sci_msg_hdr *resp;
+       struct ti_sci_info *info;
+       struct ti_sci_xfer *xfer;
+       int ret = 0;
+
+       if (IS_ERR(handle))
+               return PTR_ERR(handle);
+       if (!handle)
+               return -EINVAL;
+
+       info = handle_to_ti_sci_info(handle);
+
+       xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_FWL_SET,
+                                    TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+                                    (u32 *)&req, sizeof(req), sizeof(*resp));
+       if (IS_ERR(xfer)) {
+               ret = PTR_ERR(xfer);
+               dev_err(info->dev, "Message alloc failed(%d)\n", ret);
+               return ret;
+       }
+
+       req.fwl_id = region->fwl_id;
+       req.region = region->region;
+       req.n_permission_regs = region->n_permission_regs;
+       req.control = region->control;
+       req.permissions[0] = region->permissions[0];
+       req.permissions[1] = region->permissions[1];
+       req.permissions[2] = region->permissions[2];
+       req.start_address = region->start_address;
+       req.end_address = region->end_address;
+
+       ret = ti_sci_do_xfer(info, xfer);
+       if (ret) {
+               dev_err(info->dev, "Mbox send fail %d\n", ret);
+               return ret;
+       }
+
+       resp = (struct ti_sci_msg_hdr *)xfer->tx_message.buf;
+
+       if (!ti_sci_is_response_ack(resp))
+               return -ENODEV;
+
+       return 0;
+}
+
+/**
+ * ti_sci_cmd_get_fwl_region() - Request for getting a firewall region
+ * @handle:    pointer to TI SCI handle
+ * @region:    region configuration parameters
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_get_fwl_region(const struct ti_sci_handle *handle,
+                                    struct ti_sci_msg_fwl_region *region)
+{
+       struct ti_sci_msg_fwl_get_firewall_region_req req;
+       struct ti_sci_msg_fwl_get_firewall_region_resp *resp;
+       struct ti_sci_info *info;
+       struct ti_sci_xfer *xfer;
+       int ret = 0;
+
+       if (IS_ERR(handle))
+               return PTR_ERR(handle);
+       if (!handle)
+               return -EINVAL;
+
+       info = handle_to_ti_sci_info(handle);
+
+       xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_FWL_GET,
+                                    TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+                                    (u32 *)&req, sizeof(req), sizeof(*resp));
+       if (IS_ERR(xfer)) {
+               ret = PTR_ERR(xfer);
+               dev_err(info->dev, "Message alloc failed(%d)\n", ret);
+               return ret;
+       }
+
+       req.fwl_id = region->fwl_id;
+       req.region = region->region;
+       req.n_permission_regs = region->n_permission_regs;
+
+       ret = ti_sci_do_xfer(info, xfer);
+       if (ret) {
+               dev_err(info->dev, "Mbox send fail %d\n", ret);
+               return ret;
+       }
+
+       resp = (struct ti_sci_msg_fwl_get_firewall_region_resp *)xfer->tx_message.buf;
+
+       if (!ti_sci_is_response_ack(resp))
+               return -ENODEV;
+
+       region->fwl_id = resp->fwl_id;
+       region->region = resp->region;
+       region->n_permission_regs = resp->n_permission_regs;
+       region->control = resp->control;
+       region->permissions[0] = resp->permissions[0];
+       region->permissions[1] = resp->permissions[1];
+       region->permissions[2] = resp->permissions[2];
+       region->start_address = resp->start_address;
+       region->end_address = resp->end_address;
+
+       return 0;
+}
+
+/**
+ * ti_sci_cmd_change_fwl_owner() - Request for changing a firewall owner
+ * @handle:    pointer to TI SCI handle
+ * @region:    region configuration parameters
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_change_fwl_owner(const struct ti_sci_handle *handle,
+                                      struct ti_sci_msg_fwl_owner *owner)
+{
+       struct ti_sci_msg_fwl_change_owner_info_req req;
+       struct ti_sci_msg_fwl_change_owner_info_resp *resp;
+       struct ti_sci_info *info;
+       struct ti_sci_xfer *xfer;
+       int ret = 0;
+
+       if (IS_ERR(handle))
+               return PTR_ERR(handle);
+       if (!handle)
+               return -EINVAL;
+
+       info = handle_to_ti_sci_info(handle);
+
+       xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_FWL_GET,
+                                    TISCI_MSG_FWL_CHANGE_OWNER,
+                                    (u32 *)&req, sizeof(req), sizeof(*resp));
+       if (IS_ERR(xfer)) {
+               ret = PTR_ERR(xfer);
+               dev_err(info->dev, "Message alloc failed(%d)\n", ret);
+               return ret;
+       }
+
+       req.fwl_id = owner->fwl_id;
+       req.region = owner->region;
+       req.owner_index = owner->owner_index;
+
+       ret = ti_sci_do_xfer(info, xfer);
+       if (ret) {
+               dev_err(info->dev, "Mbox send fail %d\n", ret);
+               return ret;
+       }
+
+       resp = (struct ti_sci_msg_fwl_change_owner_info_resp *)xfer->tx_message.buf;
+
+       if (!ti_sci_is_response_ack(resp))
+               return -ENODEV;
+
+       owner->fwl_id = resp->fwl_id;
+       owner->region = resp->region;
+       owner->owner_index = resp->owner_index;
+       owner->owner_privid = resp->owner_privid;
+       owner->owner_permission_bits = resp->owner_permission_bits;
+
+       return ret;
+}
+
 /*
  * ti_sci_setup_ops() - Setup the operations structures
  * @info:      pointer to TISCI pointer
@@ -2444,6 +2616,7 @@ static void ti_sci_setup_ops(struct ti_sci_info *info)
        struct ti_sci_rm_ringacc_ops *rops = &ops->rm_ring_ops;
        struct ti_sci_rm_psil_ops *psilops = &ops->rm_psil_ops;
        struct ti_sci_rm_udmap_ops *udmap_ops = &ops->rm_udmap_ops;
+       struct ti_sci_fwl_ops *fwl_ops = &ops->fwl_ops;
 
        bops->board_config = ti_sci_cmd_set_board_config;
        bops->board_config_rm = ti_sci_cmd_set_board_config_rm;
@@ -2501,6 +2674,10 @@ static void ti_sci_setup_ops(struct ti_sci_info *info)
        udmap_ops->tx_ch_cfg = ti_sci_cmd_rm_udmap_tx_ch_cfg;
        udmap_ops->rx_ch_cfg = ti_sci_cmd_rm_udmap_rx_ch_cfg;
        udmap_ops->rx_flow_cfg = ti_sci_cmd_rm_udmap_rx_flow_cfg;
+
+       fwl_ops->set_fwl_region = ti_sci_cmd_set_fwl_region;
+       fwl_ops->get_fwl_region = ti_sci_cmd_get_fwl_region;
+       fwl_ops->change_fwl_owner = ti_sci_cmd_change_fwl_owner;
 }
 
 /**
index 2d87cdd2cf96a0d66c31bdb6cee9f9acf97c5cb2..1b601ff01bbe4ad200517ab58b2f14f26bfbf73a 100644 (file)
 #define TISCI_MSG_RM_UDMAP_FLOW_GET_CFG                0x1232
 #define TISCI_MSG_RM_UDMAP_FLOW_SIZE_THRESH_GET_CFG    0x1233
 
+#define TISCI_MSG_FWL_SET              0x9000
+#define TISCI_MSG_FWL_GET              0x9001
+#define TISCI_MSG_FWL_CHANGE_OWNER     0x9002
+
 /**
  * struct ti_sci_msg_hdr - Generic Message Header for All messages and responses
  * @type:      Type of messages: One of TI_SCI_MSG* values
@@ -1338,4 +1342,121 @@ struct ti_sci_msg_rm_udmap_flow_cfg_resp {
        struct ti_sci_msg_hdr hdr;
 } __packed;
 
+#define FWL_MAX_PRIVID_SLOTS 3U
+
+/**
+ * struct ti_sci_msg_fwl_set_firewall_region_req - Request for configuring the firewall permissions.
+ *
+ * @hdr:               Generic Header
+ *
+ * @fwl_id:            Firewall ID in question
+ * @region:            Region or channel number to set config info
+ *                     This field is unused in case of a simple firewall  and must be initialized
+ *                     to zero.  In case of a region based firewall, this field indicates the
+ *                     region in question. (index starting from 0) In case of a channel based
+ *                     firewall, this field indicates the channel in question (index starting
+ *                     from 0)
+ * @n_permission_regs: Number of permission registers to set
+ * @control:           Contents of the firewall CONTROL register to set
+ * @permissions:       Contents of the firewall PERMISSION register to set
+ * @start_address:     Contents of the firewall START_ADDRESS register to set
+ * @end_address:       Contents of the firewall END_ADDRESS register to set
+ */
+
+struct ti_sci_msg_fwl_set_firewall_region_req {
+       struct ti_sci_msg_hdr   hdr;
+       u16                     fwl_id;
+       u16                     region;
+       u32                     n_permission_regs;
+       u32                     control;
+       u32                     permissions[FWL_MAX_PRIVID_SLOTS];
+       u64                     start_address;
+       u64                     end_address;
+} __packed;
+
+/**
+ * struct ti_sci_msg_fwl_get_firewall_region_req - Request for retrieving the firewall permissions
+ *
+ * @hdr:               Generic Header
+ *
+ * @fwl_id:            Firewall ID in question
+ * @region:            Region or channel number to get config info
+ *                     This field is unused in case of a simple firewall and must be initialized
+ *                     to zero.  In case of a region based firewall, this field indicates the
+ *                     region in question (index starting from 0). In case of a channel based
+ *                     firewall, this field indicates the channel in question (index starting
+ *                     from 0).
+ * @n_permission_regs: Number of permission registers to retrieve
+ */
+struct ti_sci_msg_fwl_get_firewall_region_req {
+       struct ti_sci_msg_hdr   hdr;
+       u16                     fwl_id;
+       u16                     region;
+       u32                     n_permission_regs;
+} __packed;
+
+/**
+ * struct ti_sci_msg_fwl_get_firewall_region_resp - Response for retrieving the firewall permissions
+ *
+ * @hdr:               Generic Header
+ *
+ * @fwl_id:            Firewall ID in question
+ * @region:            Region or channel number to set config info This field is
+ *                     unused in case of a simple firewall  and must be initialized to zero.  In
+ *                     case of a region based firewall, this field indicates the region in
+ *                     question. (index starting from 0) In case of a channel based firewall, this
+ *                     field indicates the channel in question (index starting from 0)
+ * @n_permission_regs: Number of permission registers retrieved
+ * @control:           Contents of the firewall CONTROL register
+ * @permissions:       Contents of the firewall PERMISSION registers
+ * @start_address:     Contents of the firewall START_ADDRESS register This is not applicable for channelized firewalls.
+ * @end_address:       Contents of the firewall END_ADDRESS register This is not applicable for channelized firewalls.
+ */
+struct ti_sci_msg_fwl_get_firewall_region_resp {
+       struct ti_sci_msg_hdr   hdr;
+       u16                     fwl_id;
+       u16                     region;
+       u32                     n_permission_regs;
+       u32                     control;
+       u32                     permissions[FWL_MAX_PRIVID_SLOTS];
+       u64                     start_address;
+       u64                     end_address;
+} __packed;
+
+/**
+ * struct ti_sci_msg_fwl_change_owner_info_req - Request for a firewall owner change
+ *
+ * @hdr:               Generic Header
+ *
+ * @fwl_id:            Firewall ID in question
+ * @region:            Region or channel number if applicable
+ * @owner_index:       New owner index to transfer ownership to
+ */
+struct ti_sci_msg_fwl_change_owner_info_req {
+       struct ti_sci_msg_hdr   hdr;
+       u16                     fwl_id;
+       u16                     region;
+       u8                      owner_index;
+} __packed;
+
+/**
+ * struct ti_sci_msg_fwl_change_owner_info_resp - Response for a firewall owner change
+ *
+ * @hdr:               Generic Header
+ *
+ * @fwl_id:            Firewall ID specified in request
+ * @region:            Region or channel number specified in request
+ * @owner_index:       Owner index specified in request
+ * @owner_privid:      New owner priv-ID returned by DMSC.
+ * @owner_permission_bits:     New owner permission bits returned by DMSC.
+ */
+struct ti_sci_msg_fwl_change_owner_info_resp {
+       struct ti_sci_msg_hdr   hdr;
+       u16                     fwl_id;
+       u16                     region;
+       u8                      owner_index;
+       u8                      owner_privid;
+       u16                     owner_permission_bits;
+} __packed;
+
 #endif /* __TI_SCI_H */
index 222cf665460ff294b5344764f700fcc82818ad5f..895cb1b911ca8cbe7435c9a06a3899687615ee14 100644 (file)
@@ -510,6 +510,68 @@ struct ti_sci_rm_udmap_ops {
                const struct ti_sci_msg_rm_udmap_flow_cfg *params);
 };
 
+/**
+ * struct ti_sci_msg_fwl_region_cfg - Request and Response for firewalls settings
+ *
+ * @fwl_id:            Firewall ID in question
+ * @region:            Region or channel number to set config info
+ *                     This field is unused in case of a simple firewall  and must be initialized
+ *                     to zero.  In case of a region based firewall, this field indicates the
+ *                     region in question. (index starting from 0) In case of a channel based
+ *                     firewall, this field indicates the channel in question (index starting
+ *                     from 0)
+ * @n_permission_regs: Number of permission registers to set
+ * @control:           Contents of the firewall CONTROL register to set
+ * @permissions:       Contents of the firewall PERMISSION register to set
+ * @start_address:     Contents of the firewall START_ADDRESS register to set
+ * @end_address:       Contents of the firewall END_ADDRESS register to set
+ */
+struct ti_sci_msg_fwl_region {
+       u16 fwl_id;
+       u16 region;
+       u32 n_permission_regs;
+       u32 control;
+       u32 permissions[3];
+       u64 start_address;
+       u64 end_address;
+} __packed;
+
+/**
+ * \brief Request and Response for firewall owner change
+ *
+ * @fwl_id:            Firewall ID in question
+ * @region:            Region or channel number to set config info
+ *                     This field is unused in case of a simple firewall  and must be initialized
+ *                     to zero.  In case of a region based firewall, this field indicates the
+ *                     region in question. (index starting from 0) In case of a channel based
+ *                     firewall, this field indicates the channel in question (index starting
+ *                     from 0)
+ * @n_permission_regs: Number of permission registers <= 3
+ * @control:           Control register value for this region
+ * @owner_index:       New owner index to change to. Owner indexes are setup in DMSC firmware boot configuration data
+ * @owner_privid:      New owner priv-id, used to lookup owner_index is not known, must be set to zero otherwise
+ * @owner_permission_bits: New owner permission bits
+ */
+struct ti_sci_msg_fwl_owner {
+       u16 fwl_id;
+       u16 region;
+       u8 owner_index;
+       u8 owner_privid;
+       u16 owner_permission_bits;
+} __packed;
+
+/**
+ * struct ti_sci_fwl_ops - Firewall specific operations
+ * @set_fwl_region: Request for configuring the firewall permissions.
+ * @get_fwl_region: Request for retrieving the firewall permissions.
+ * @change_fwl_owner: Request for a change of firewall owner.
+ */
+struct ti_sci_fwl_ops {
+       int (*set_fwl_region)(const struct ti_sci_handle *handle, const struct ti_sci_msg_fwl_region *region);
+       int (*get_fwl_region)(const struct ti_sci_handle *handle, struct ti_sci_msg_fwl_region *region);
+       int (*change_fwl_owner)(const struct ti_sci_handle *handle, struct ti_sci_msg_fwl_owner *owner);
+};
+
 /**
  * struct ti_sci_ops - Function support for TI SCI
  * @board_ops: Miscellaneous operations
@@ -518,6 +580,7 @@ struct ti_sci_rm_udmap_ops {
  * @core_ops:  Core specific operations
  * @proc_ops:  Processor specific operations
  * @ring_ops: Ring Accelerator Management operations
+ * @fw_ops:    Firewall specific operations
  */
 struct ti_sci_ops {
        struct ti_sci_board_ops board_ops;
@@ -529,6 +592,7 @@ struct ti_sci_ops {
        struct ti_sci_rm_ringacc_ops rm_ring_ops;
        struct ti_sci_rm_psil_ops rm_psil_ops;
        struct ti_sci_rm_udmap_ops rm_udmap_ops;
+       struct ti_sci_fwl_ops fwl_ops;
 };
 
 /**