arm: kirkwood: lsxl: add note about sata in README

The boot commands have changed in the environment. Add a note about the
incompatible change and how resolve the issue in the board's README.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>

diff --git a/board/buffalo/lsxl/README b/board/buffalo/lsxl/README
index ef5ed4288063ed529b63caf71a6c7b0319e752b8..fffb1ce8ec0a69a95dc01a7e0ce1b3e4421a0a89 100644 (file)
--- a/board/buffalo/lsxl/README
+++ b/board/buffalo/lsxl/README
@@ -8,6 +8,16 @@ the LS-XHL PCB has two SDRAM chips. Both have a Kirkwood CPU (Marvell
 bootloader and its environment. The linux kernel and the initial ramdisk
 are loaded from the hard disk.
 
+Important! Changes since v2019.07
+---------------------------------
+In u-boot v2019.07 the driver for the SATA port was changed to a new
+one. This means that the old "ide" command and block interface is not
+supported anymore. More important, the boot commands have changed. You have
+to overwrite the boot commands in your envionment with the new ones:
+
+  env default -f bootcmd_legacy
+  env default -f bootcmd_hdd
+  saveenv
 
 Rescue Mode
 -----------