spi: dw: Rename registers to match datasheet

A few registers had slightly different names from what is in the datasheet.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>

diff --git a/drivers/spi/designware_spi.c b/drivers/spi/designware_spi.c
index e8ba80ef41dec08fedb80a62721e04710b6b4dfd..8abcdde8a396093a31f0016f1c3c97e6abb53331 100644 (file)
--- a/drivers/spi/designware_spi.c
+++ b/drivers/spi/designware_spi.c
@@ -27,14 +27,14 @@
 #include <asm/io.h>
 
 /* Register offsets */
-#define DW_SPI_CTRL0                   0x00
-#define DW_SPI_CTRL1                   0x04
+#define DW_SPI_CTRLR0                  0x00
+#define DW_SPI_CTRLR1                  0x04
 #define DW_SPI_SSIENR                  0x08
 #define DW_SPI_MWCR                    0x0c
 #define DW_SPI_SER                     0x10
 #define DW_SPI_BAUDR                   0x14
-#define DW_SPI_TXFLTR                  0x18
-#define DW_SPI_RXFLTR                  0x1c
+#define DW_SPI_TXFTLR                  0x18
+#define DW_SPI_RXFTLR                  0x1c
 #define DW_SPI_TXFLR                   0x20
 #define DW_SPI_RXFLR                   0x24
 #define DW_SPI_SR                      0x28
@@ -191,13 +191,13 @@ static void spi_hw_init(struct udevice *bus, struct dw_spi_priv *priv)
                u32 fifo;
 
                for (fifo = 1; fifo < 256; fifo++) {
-                       dw_write(priv, DW_SPI_TXFLTR, fifo);
-                       if (fifo != dw_read(priv, DW_SPI_TXFLTR))
+                       dw_write(priv, DW_SPI_TXFTLR, fifo);
+                       if (fifo != dw_read(priv, DW_SPI_TXFTLR))
                                break;
                }
 
                priv->fifo_len = (fifo == 1) ? 0 : fifo;
-               dw_write(priv, DW_SPI_TXFLTR, 0);
+               dw_write(priv, DW_SPI_TXFTLR, 0);
        }
        dev_dbg(bus, "fifo_len=%d\n", priv->fifo_len);
 }
@@ -443,8 +443,8 @@ static int dw_spi_xfer(struct udevice *dev, unsigned int bitlen,
        dev_dbg(dev, "cr0=%08x rx=%p tx=%p len=%d [bytes]\n", cr0, rx, tx,
                priv->len);
        /* Reprogram cr0 only if changed */
-       if (dw_read(priv, DW_SPI_CTRL0) != cr0)
-               dw_write(priv, DW_SPI_CTRL0, cr0);
+       if (dw_read(priv, DW_SPI_CTRLR0) != cr0)
+               dw_write(priv, DW_SPI_CTRLR0, cr0);
 
        /*
         * Configure the desired SS (slave select 0...3) in the controller