--- /dev/null
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Copyright (C) 2020 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (C) 2014 Amlogic, Inc.
+ *
+ * This PWM is only a set of Gates, Dividers and Counters:
+ * PWM output is achieved by calculating a clock that permits calculating
+ * two periods (low and high). The counter then has to be set to switch after
+ * N cycles for the first half period.
+ * The hardware has no "polarity" setting. This driver reverses the period
+ * cycles (the low length is inverted with the high length) for
+ * PWM_POLARITY_INVERSED.
+ * Setting the polarity will disable and re-enable the PWM output.
+ * Disabling the PWM stops the output immediately (without waiting for the
+ * current period to complete first).
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <div64.h>
+#include <dm.h>
+#include <pwm.h>
+#include <regmap.h>
+#include <linux/io.h>
+#include <linux/math64.h>
+#include <linux/bitfield.h>
+#include <linux/clk-provider.h>
+
+#define NSEC_PER_SEC 1000000000L
+
+#define REG_PWM_A 0x0
+#define REG_PWM_B 0x4
+#define PWM_LOW_MASK GENMASK(15, 0)
+#define PWM_HIGH_MASK GENMASK(31, 16)
+
+#define REG_MISC_AB 0x8
+#define MISC_B_CLK_EN BIT(23)
+#define MISC_A_CLK_EN BIT(15)
+#define MISC_CLK_DIV_MASK 0x7f
+#define MISC_B_CLK_DIV_SHIFT 16
+#define MISC_A_CLK_DIV_SHIFT 8
+#define MISC_B_CLK_SEL_SHIFT 6
+#define MISC_A_CLK_SEL_SHIFT 4
+#define MISC_CLK_SEL_MASK 0x3
+#define MISC_B_EN BIT(1)
+#define MISC_A_EN BIT(0)
+
+#define MESON_NUM_PWMS 2
+
+static struct meson_pwm_channel_data {
+ u8 reg_offset;
+ u8 clk_sel_shift;
+ u8 clk_div_shift;
+ u32 clk_en_mask;
+ u32 pwm_en_mask;
+} meson_pwm_per_channel_data[MESON_NUM_PWMS] = {
+ {
+ .reg_offset = REG_PWM_A,
+ .clk_sel_shift = MISC_A_CLK_SEL_SHIFT,
+ .clk_div_shift = MISC_A_CLK_DIV_SHIFT,
+ .clk_en_mask = MISC_A_CLK_EN,
+ .pwm_en_mask = MISC_A_EN,
+ },
+ {
+ .reg_offset = REG_PWM_B,
+ .clk_sel_shift = MISC_B_CLK_SEL_SHIFT,
+ .clk_div_shift = MISC_B_CLK_DIV_SHIFT,
+ .clk_en_mask = MISC_B_CLK_EN,
+ .pwm_en_mask = MISC_B_EN,
+ }
+};
+
+struct meson_pwm_channel {
+ unsigned int hi;
+ unsigned int lo;
+ u8 pre_div;
+ uint period_ns;
+ uint duty_ns;
+ bool configured;
+ bool enabled;
+ bool polarity;
+ struct clk clk;
+};
+
+struct meson_pwm_data {
+ const long *parent_ids;
+ unsigned int num_parents;
+};
+
+struct meson_pwm {
+ const struct meson_pwm_data *data;
+ struct meson_pwm_channel channels[MESON_NUM_PWMS];
+ void __iomem *base;
+};
+
+static int meson_pwm_set_enable(struct udevice *dev, uint channel, bool enable);
+
+static int meson_pwm_set_config(struct udevice *dev, uint channeln,
+ uint period_ns, uint duty_ns)
+{
+ struct meson_pwm *priv = dev_get_priv(dev);
+ struct meson_pwm_channel *channel;
+ struct meson_pwm_channel_data *channel_data;
+ unsigned int duty, period, pre_div, cnt, duty_cnt;
+ unsigned long fin_freq;
+
+ if (channeln >= MESON_NUM_PWMS)
+ return -ENODEV;
+
+ channel = &priv->channels[channeln];
+ channel_data = &meson_pwm_per_channel_data[channeln];
+
+ period = period_ns;
+ if (channel->polarity)
+ duty = period_ns - duty_ns;
+ else
+ duty = duty_ns;
+
+ debug("%s%d: polarity %s duty %d period %d\n", __func__, channeln,
+ channel->polarity ? "true" : "false", duty, period);
+
+ fin_freq = clk_get_rate(&channel->clk);
+ if (fin_freq == 0) {
+ printf("%s%d: invalid source clock frequency\n", __func__, channeln);
+ return -EINVAL;
+ }
+
+ debug("%s%d: fin_freq: %lu Hz\n", __func__, channeln, fin_freq);
+
+ pre_div = div64_u64(fin_freq * (u64)period, NSEC_PER_SEC * 0xffffLL);
+ if (pre_div > MISC_CLK_DIV_MASK) {
+ printf("%s%d: unable to get period pre_div\n", __func__, channeln);
+ return -EINVAL;
+ }
+
+ cnt = div64_u64(fin_freq * (u64)period, NSEC_PER_SEC * (pre_div + 1));
+ if (cnt > 0xffff) {
+ printf("%s%d: unable to get period cnt\n", __func__, channeln);
+ return -EINVAL;
+ }
+
+ debug("%s%d: period=%u pre_div=%u cnt=%u\n", __func__, channeln, period, pre_div, cnt);
+
+ if (duty == period) {
+ channel->pre_div = pre_div;
+ channel->hi = cnt;
+ channel->lo = 0;
+ } else if (duty == 0) {
+ channel->pre_div = pre_div;
+ channel->hi = 0;
+ channel->lo = cnt;
+ } else {
+ /* Then check is we can have the duty with the same pre_div */
+ duty_cnt = div64_u64(fin_freq * (u64)duty, NSEC_PER_SEC * (pre_div + 1));
+ if (duty_cnt > 0xffff) {
+ printf("%s%d: unable to get duty cycle\n", __func__, channeln);
+ return -EINVAL;
+ }
+
+ debug("%s%d: duty=%u pre_div=%u duty_cnt=%u\n",
+ __func__, channeln, duty, pre_div, duty_cnt);
+
+ channel->pre_div = pre_div;
+ channel->hi = duty_cnt;
+ channel->lo = cnt - duty_cnt;
+ }
+
+ channel->period_ns = period_ns;
+ channel->duty_ns = duty_ns;
+ channel->configured = true;
+
+ if (channel->enabled) {
+ meson_pwm_set_enable(dev, channeln, false);
+ meson_pwm_set_enable(dev, channeln, true);
+ }
+
+ return 0;
+}
+
+static int meson_pwm_set_enable(struct udevice *dev, uint channeln, bool enable)
+{
+ struct meson_pwm *priv = dev_get_priv(dev);
+ struct meson_pwm_channel *channel;
+ struct meson_pwm_channel_data *channel_data;
+ u32 value;
+
+ if (channeln >= MESON_NUM_PWMS)
+ return -ENODEV;
+
+ channel = &priv->channels[channeln];
+ channel_data = &meson_pwm_per_channel_data[channeln];
+
+ if (!channel->configured)
+ return -EINVAL;
+
+ if (enable) {
+ if (channel->enabled)
+ return 0;
+
+ value = readl(priv->base + REG_MISC_AB);
+ value &= ~(MISC_CLK_DIV_MASK << channel_data->clk_div_shift);
+ value |= channel->pre_div << channel_data->clk_div_shift;
+ value |= channel_data->clk_en_mask;
+ writel(value, priv->base + REG_MISC_AB);
+
+ value = FIELD_PREP(PWM_HIGH_MASK, channel->hi) |
+ FIELD_PREP(PWM_LOW_MASK, channel->lo);
+ writel(value, priv->base + channel_data->reg_offset);
+
+ value = readl(priv->base + REG_MISC_AB);
+ value |= channel_data->pwm_en_mask;
+ writel(value, priv->base + REG_MISC_AB);
+
+ debug("%s%d: enabled\n", __func__, channeln);
+ channel->enabled = true;
+ } else {
+ if (!channel->enabled)
+ return 0;
+
+ value = readl(priv->base + REG_MISC_AB);
+ value &= channel_data->pwm_en_mask;
+ writel(value, priv->base + REG_MISC_AB);
+
+ debug("%s%d: disabled\n", __func__, channeln);
+ channel->enabled = false;
+ }
+
+ return 0;
+}
+
+static int meson_pwm_set_invert(struct udevice *dev, uint channeln, bool polarity)
+{
+ struct meson_pwm *priv = dev_get_priv(dev);
+ struct meson_pwm_channel *channel;
+
+ if (channeln >= MESON_NUM_PWMS)
+ return -ENODEV;
+
+ debug("%s%d: set invert %s\n", __func__, channeln, polarity ? "true" : "false");
+
+ channel = &priv->channels[channeln];
+
+ channel->polarity = polarity;
+
+ if (!channel->configured)
+ return 0;
+
+ return meson_pwm_set_config(dev, channeln, channel->period_ns, channel->duty_ns);
+}
+
+static int meson_pwm_ofdata_to_platdata(struct udevice *dev)
+{
+ struct meson_pwm *priv = dev_get_priv(dev);
+
+ priv->base = dev_read_addr_ptr(dev);
+
+ return 0;
+}
+
+static int meson_pwm_probe(struct udevice *dev)
+{
+ struct meson_pwm *priv = dev_get_priv(dev);
+ struct meson_pwm_data *data;
+ unsigned int i, p;
+ char name[255];
+ int err;
+ u32 reg;
+
+ data = (struct meson_pwm_data *)dev_get_driver_data(dev);
+ if (!data)
+ return -EINVAL;
+
+ for (i = 0; i < MESON_NUM_PWMS; i++) {
+ struct meson_pwm_channel *channel = &priv->channels[i];
+ struct meson_pwm_channel_data *channel_data = &meson_pwm_per_channel_data[i];
+
+ snprintf(name, sizeof(name), "clkin%u", i);
+
+ err = clk_get_by_name(dev, name, &channel->clk);
+ /* If clock is not specified, use the already set clock */
+ if (err == -ENODATA) {
+ struct udevice *cdev;
+ struct uclass *uc;
+
+ /* Get parent from mux */
+ p = (readl(priv->base + REG_MISC_AB) >> channel_data->clk_sel_shift) &
+ MISC_CLK_SEL_MASK;
+
+ if (p >= data->num_parents) {
+ printf("%s%d: hw parent is invalid\n", __func__, i);
+ return -EINVAL;
+ }
+
+ if (data->parent_ids[p] == -1) {
+ /* Search for xtal clk */
+ const char *str;
+
+ err = uclass_get(UCLASS_CLK, &uc);
+ if (err)
+ return err;
+
+ uclass_foreach_dev(cdev, uc) {
+ if (strcmp(cdev->driver->name, "fixed_rate_clock"))
+ continue;
+
+ str = ofnode_read_string(cdev->node, "clock-output-names");
+ if (!str)
+ continue;
+
+ if (!strcmp(str, "xtal")) {
+ err = uclass_get_device_by_ofnode(UCLASS_CLK,
+ cdev->node,
+ &cdev);
+ if (err) {
+ printf("%s%d: Failed to get xtal clk\n", __func__, i);
+ return err;
+ }
+
+ break;
+ }
+ }
+
+ if (!cdev) {
+ printf("%s%d: Failed to find xtal clk device\n", __func__, i);
+ return -EINVAL;
+ }
+
+ channel->clk.dev = cdev;
+ channel->clk.id = 0;
+ channel->clk.data = 0;
+ } else {
+ /* Look for parent clock */
+ err = uclass_get(UCLASS_CLK, &uc);
+ if (err)
+ return err;
+
+ uclass_foreach_dev(cdev, uc) {
+ if (strstr(cdev->driver->name, "meson_clk"))
+ break;
+ }
+
+ if (!cdev) {
+ printf("%s%d: Failed to find clk device\n", __func__, i);
+ return -EINVAL;
+ }
+
+ err = uclass_get_device_by_ofnode(UCLASS_CLK, cdev->node, &cdev);
+ if (err) {
+ printf("%s%d: Failed to get clk controller\n", __func__, i);
+ return err;
+ }
+
+ channel->clk.dev = cdev;
+ channel->clk.id = data->parent_ids[p];
+ channel->clk.data = 0;
+ }
+
+ /* We have our source clock, do not alter HW clock mux */
+ continue;
+ } else
+ return err;
+
+ /* Get id in list */
+ for (p = 0 ; p < data->num_parents ; ++p) {
+ if (!strcmp(channel->clk.dev->driver->name, "fixed_rate_clock")) {
+ if (data->parent_ids[p] == -1)
+ break;
+ } else {
+ if (data->parent_ids[p] == channel->clk.id)
+ break;
+ }
+ }
+
+ /* Invalid clock ID */
+ if (p == data->num_parents) {
+ printf("%s%d: source clock is invalid\n", __func__, i);
+ return -EINVAL;
+ }
+
+ /* switch parent in mux */
+ reg = readl(priv->base + REG_MISC_AB);
+
+ debug("%s%d: switching parent %d to %d\n", __func__, i,
+ (reg >> channel_data->clk_sel_shift) & MISC_CLK_SEL_MASK, p);
+
+ reg &= MISC_CLK_SEL_MASK << channel_data->clk_sel_shift;
+ reg |= (p & MISC_CLK_SEL_MASK) << channel_data->clk_sel_shift;
+ writel(reg, priv->base + REG_MISC_AB);
+ }
+
+ return 0;
+}
+
+static const struct pwm_ops meson_pwm_ops = {
+ .set_config = meson_pwm_set_config,
+ .set_enable = meson_pwm_set_enable,
+ .set_invert = meson_pwm_set_invert,
+};
+
+#define XTAL -1
+
+/* Local clock ids aliases to avoid define conflicts */
+#define GXBB_CLKID_HDMI_PLL 2
+#define GXBB_CLKID_FCLK_DIV3 5
+#define GXBB_CLKID_FCLK_DIV4 6
+#define GXBB_CLKID_CLK81 12
+
+static const long pwm_gxbb_parent_ids[] = {
+ XTAL, GXBB_CLKID_HDMI_PLL, GXBB_CLKID_FCLK_DIV4, GXBB_CLKID_FCLK_DIV3
+};
+
+static const struct meson_pwm_data pwm_gxbb_data = {
+ .parent_ids = pwm_gxbb_parent_ids,
+ .num_parents = ARRAY_SIZE(pwm_gxbb_parent_ids),
+};
+
+/*
+ * Only the 2 first inputs of the GXBB AO PWMs are valid
+ * The last 2 are grounded
+ */
+static const long pwm_gxbb_ao_parent_ids[] = {
+ XTAL, GXBB_CLKID_CLK81
+};
+
+static const struct meson_pwm_data pwm_gxbb_ao_data = {
+ .parent_ids = pwm_gxbb_ao_parent_ids,
+ .num_parents = ARRAY_SIZE(pwm_gxbb_ao_parent_ids),
+};
+
+/* Local clock ids aliases to avoid define conflicts */
+#define AXG_CLKID_FCLK_DIV3 3
+#define AXG_CLKID_FCLK_DIV4 4
+#define AXG_CLKID_FCLK_DIV5 5
+#define AXG_CLKID_CLK81 10
+
+static const long pwm_axg_ee_parent_ids[] = {
+ XTAL, AXG_CLKID_FCLK_DIV5, AXG_CLKID_FCLK_DIV4, AXG_CLKID_FCLK_DIV3
+};
+
+static const struct meson_pwm_data pwm_axg_ee_data = {
+ .parent_ids = pwm_axg_ee_parent_ids,
+ .num_parents = ARRAY_SIZE(pwm_axg_ee_parent_ids),
+};
+
+static const long pwm_axg_ao_parent_ids[] = {
+ AXG_CLKID_CLK81, XTAL, AXG_CLKID_FCLK_DIV4, AXG_CLKID_FCLK_DIV5
+};
+
+static const struct meson_pwm_data pwm_axg_ao_data = {
+ .parent_ids = pwm_axg_ao_parent_ids,
+ .num_parents = ARRAY_SIZE(pwm_axg_ao_parent_ids),
+};
+
+/* Local clock ids aliases to avoid define conflicts */
+#define G12A_CLKID_FCLK_DIV3 3
+#define G12A_CLKID_FCLK_DIV4 4
+#define G12A_CLKID_FCLK_DIV5 5
+#define G12A_CLKID_CLK81 10
+#define G12A_CLKID_HDMI_PLL 128
+
+static const long pwm_g12a_ao_ab_parent_ids[] = {
+ XTAL, G12A_CLKID_CLK81, G12A_CLKID_FCLK_DIV4, G12A_CLKID_FCLK_DIV5
+};
+
+static const struct meson_pwm_data pwm_g12a_ao_ab_data = {
+ .parent_ids = pwm_g12a_ao_ab_parent_ids,
+ .num_parents = ARRAY_SIZE(pwm_g12a_ao_ab_parent_ids),
+};
+
+static const long pwm_g12a_ao_cd_parent_ids[] = {
+ XTAL, G12A_CLKID_CLK81,
+};
+
+static const struct meson_pwm_data pwm_g12a_ao_cd_data = {
+ .parent_ids = pwm_g12a_ao_cd_parent_ids,
+ .num_parents = ARRAY_SIZE(pwm_g12a_ao_cd_parent_ids),
+};
+
+static const long pwm_g12a_ee_parent_ids[] = {
+ XTAL, G12A_CLKID_HDMI_PLL, G12A_CLKID_FCLK_DIV4, G12A_CLKID_FCLK_DIV3
+};
+
+static const struct meson_pwm_data pwm_g12a_ee_data = {
+ .parent_ids = pwm_g12a_ee_parent_ids,
+ .num_parents = ARRAY_SIZE(pwm_g12a_ee_parent_ids),
+};
+
+static const struct udevice_id meson_pwm_ids[] = {
+ {
+ .compatible = "amlogic,meson-gxbb-pwm",
+ .data = (ulong)&pwm_gxbb_data
+ },
+ {
+ .compatible = "amlogic,meson-gxbb-ao-pwm",
+ .data = (ulong)&pwm_gxbb_ao_data
+ },
+ {
+ .compatible = "amlogic,meson-axg-ee-pwm",
+ .data = (ulong)&pwm_axg_ee_data
+ },
+ {
+ .compatible = "amlogic,meson-axg-ao-pwm",
+ .data = (ulong)&pwm_axg_ao_data
+ },
+ {
+ .compatible = "amlogic,meson-g12a-ee-pwm",
+ .data = (ulong)&pwm_g12a_ee_data
+ },
+ {
+ .compatible = "amlogic,meson-g12a-ao-pwm-ab",
+ .data = (ulong)&pwm_g12a_ao_ab_data
+ },
+ {
+ .compatible = "amlogic,meson-g12a-ao-pwm-cd",
+ .data = (ulong)&pwm_g12a_ao_cd_data
+ },
+};
+
+U_BOOT_DRIVER(meson_pwm) = {
+ .name = "meson_pwm",
+ .id = UCLASS_PWM,
+ .of_match = meson_pwm_ids,
+ .ops = &meson_pwm_ops,
+ .ofdata_to_platdata = meson_pwm_ofdata_to_platdata,
+ .probe = meson_pwm_probe,
+ .priv_auto_alloc_size = sizeof(struct meson_pwm),
+};
projects / u-boot.git / commitdiff