spi: davinci: add support for multiple bus and chip select

Currently davinci spi driver supports only bus 0 cs 0.
This patch allows driver to support bus 1 and bus 2 with
configurable number of chip selects. Also defaults are
selected in a way to avoid regression on other platforms
that uses davinci spi driver and has only one spi bus.

Signed-off-by: Rex Chang <rchang@ti.com>
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>

diff --git a/drivers/spi/davinci_spi.c b/drivers/spi/davinci_spi.c
index e3fb3212aa5c2073dedb72dc73f6648d74829568..28fb3a2e9f8f0e0c01214cc669a5383e96688470 100644 (file)
--- a/drivers/spi/davinci_spi.c
+++ b/drivers/spi/davinci_spi.c
@@ -32,7 +32,27 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
        if (!ds)
                return NULL;
 
-       ds->regs = (struct davinci_spi_regs *)CONFIG_SYS_SPI_BASE;
+       ds->slave.bus = bus;
+       ds->slave.cs = cs;
+
+       switch (bus) {
+       case SPI0_BUS:
+               ds->regs = (struct davinci_spi_regs *)SPI0_BASE;
+               break;
+#ifdef CONFIG_SYS_SPI1
+       case SPI1_BUS:
+               ds->regs = (struct davinci_spi_regs *)SPI0_BASE;
+               break;
+#endif
+#ifdef CONFIG_SYS_SPI2
+       case SPI2_BUS:
+               ds->regs = (struct davinci_spi_regs *)SPI2_BASE;
+               break;
+#endif
+       default: /* Invalid bus number */
+               return NULL;
+       }
+
        ds->freq = max_hz;
 
        return &ds->slave;
@@ -59,7 +79,7 @@ int spi_claim_bus(struct spi_slave *slave)
        writel(SPIGCR1_MASTER_MASK | SPIGCR1_CLKMOD_MASK, &ds->regs->gcr1);
 
        /* CS, CLK, SIMO and SOMI are functional pins */
-       writel((SPIPC0_EN0FUN_MASK | SPIPC0_CLKFUN_MASK |
+       writel(((1 << slave->cs) | SPIPC0_CLKFUN_MASK |
                SPIPC0_DOFUN_MASK | SPIPC0_DIFUN_MASK), &ds->regs->pc0);
 
        /* setup format */
@@ -264,7 +284,30 @@ out:
 
 int spi_cs_is_valid(unsigned int bus, unsigned int cs)
 {
-       return bus == 0 && cs == 0;
+       int ret = 0;
+
+       switch (bus) {
+       case SPI0_BUS:
+               if (cs < SPI0_NUM_CS)
+                       ret = 1;
+               break;
+#ifdef CONFIG_SYS_SPI1
+       case SPI1_BUS:
+               if (cs < SPI1_NUM_CS)
+                       ret = 1;
+               break;
+#endif
+#ifdef CONFIG_SYS_SPI2
+       case SPI2_BUS:
+               if (cs < SPI2_NUM_CS)
+                       ret = 1;
+               break;
+#endif
+       default:
+               /* Invalid bus number. Do nothing */
+               break;
+       }
+       return ret;
 }
 
 void spi_cs_activate(struct spi_slave *slave)

diff --git a/drivers/spi/davinci_spi.h b/drivers/spi/davinci_spi.h
index 33f69b5ca98aac3f3ddb67945dd04df732723b55..d4612d3527e08dc0fb7d4c1bf1c54ea6520f991a 100644 (file)
--- a/drivers/spi/davinci_spi.h
+++ b/drivers/spi/davinci_spi.h
@@ -74,6 +74,39 @@ struct davinci_spi_regs {
 /* SPIDEF */
 #define SPIDEF_CSDEF0_MASK     BIT(0)
 
+#define SPI0_BUS               0
+#define SPI0_BASE              CONFIG_SYS_SPI_BASE
+/*
+ * Define default SPI0_NUM_CS as 1 for existing platforms that uses this
+ * driver. Platform can configure number of CS using CONFIG_SYS_SPI0_NUM_CS
+ * if more than one CS is supported and by defining CONFIG_SYS_SPI0.
+ */
+#ifndef CONFIG_SYS_SPI0
+#define SPI0_NUM_CS            1
+#else
+#define SPI0_NUM_CS            CONFIG_SYS_SPI0_NUM_CS
+#endif
+
+/*
+ * define CONFIG_SYS_SPI1 when platform has spi-1 device (bus #1) and
+ * CONFIG_SYS_SPI1_NUM_CS defines number of CS on this bus
+ */
+#ifdef CONFIG_SYS_SPI1
+#define SPI1_BUS               1
+#define SPI1_NUM_CS            CONFIG_SYS_SPI1_NUM_CS
+#define SPI1_BASE              CONFIG_SYS_SPI1_BASE
+#endif
+
+/*
+ * define CONFIG_SYS_SPI2 when platform has spi-2 device (bus #2) and
+ * CONFIG_SYS_SPI2_NUM_CS defines number of CS on this bus
+ */
+#ifdef CONFIG_SYS_SPI2
+#define SPI2_BUS               2
+#define SPI2_NUM_CS            CONFIG_SYS_SPI2_NUM_CS
+#define SPI2_BASE              CONFIG_SYS_SPI2_BASE
+#endif
+
 struct davinci_spi_slave {
        struct spi_slave slave;
        struct davinci_spi_regs *regs;