video: stm32: stm32_ltdc: set rate of the pixel clock

pxclk is useless to set pixel clock.

Signed-off-by: yannick fertre <yannick.fertre@st.com>

diff --git a/drivers/video/stm32/stm32_ltdc.c b/drivers/video/stm32/stm32_ltdc.c
index 8d89b580d6783c07cb00c2b52ae772d00ba7af60..08e0afcc9ea6c0fc440bbb690224c78ea6b20968 100644 (file)
--- a/drivers/video/stm32/stm32_ltdc.c
+++ b/drivers/video/stm32/stm32_ltdc.c
@@ -301,9 +301,9 @@ static int stm32_ltdc_probe(struct udevice *dev)
        struct video_priv *uc_priv = dev_get_uclass_priv(dev);
        struct stm32_ltdc_priv *priv = dev_get_priv(dev);
        struct udevice *panel;
-       struct clk pclk, pxclk;
+       struct clk pclk;
        struct reset_ctl rst;
-       int ret;
+       int rate, ret;
 
        priv->regs = (void *)dev_read_addr(dev);
        if ((fdt_addr_t)priv->regs == FDT_ADDR_T_NONE) {
@@ -311,9 +311,16 @@ static int stm32_ltdc_probe(struct udevice *dev)
                return -EINVAL;
        }
 
-       ret = uclass_first_device(UCLASS_PANEL, &panel);
+       ret = clk_get_by_index(dev, 0, &pclk);
        if (ret) {
-               debug("%s: panel device error %d\n", __func__, ret);
+               debug("%s: peripheral clock get error %d\n", __func__, ret);
+               return ret;
+       }
+
+       ret = clk_enable(&pclk);
+       if (ret) {
+               debug("%s: peripheral clock enable error %d\n",
+                     __func__, ret);
                return ret;
        }
 
@@ -326,6 +333,12 @@ static int stm32_ltdc_probe(struct udevice *dev)
        /* Reset */
        reset_deassert(&rst);
 
+       ret = uclass_first_device(UCLASS_PANEL, &panel);
+       if (ret) {
+               debug("%s: panel device error %d\n", __func__, ret);
+               return ret;
+       }
+
        ret = panel_enable_backlight(panel);
        if (ret) {
                debug("%s: panel %s enable backlight error %d\n",
@@ -333,31 +346,24 @@ static int stm32_ltdc_probe(struct udevice *dev)
                return ret;
        }
 
-       ret = fdtdec_decode_display_timing(gd->fdt_blob, dev_of_offset(dev),
-                                          0, &priv->timing);
+       ret = fdtdec_decode_display_timing(gd->fdt_blob,
+                                          dev_of_offset(dev), 0,
+                                          &priv->timing);
        if (ret) {
-               debug("%s: decode display timing error %d\n", __func__, ret);
+               debug("%s: decode display timing error %d\n",
+                     __func__, ret);
                return -EINVAL;
        }
 
-       ret = clk_get_by_name(dev, "pclk", &pclk);
-       if (ret) {
-               debug("%s: peripheral clock get error %d\n", __func__, ret);
-               return ret;
+       rate = clk_set_rate(&pclk, priv->timing.pixelclock.typ);
+       if (rate < 0) {
+               debug("%s: fail to set pixel clock %d hz %d hz\n",
+                     __func__, priv->timing.pixelclock.typ, rate);
+               return rate;
        }
 
-       ret = clk_enable(&pclk);
-       if (ret) {
-               debug("%s: peripheral clock enable error %d\n", __func__, ret);
-               return ret;
-       }
-
-       /* Verify pixel clock value if any & inform user accordingly */
-       ret = clk_get_by_name(dev, "pxclk", &pxclk);
-       if (!ret) {
-               if (clk_get_rate(&pxclk) != priv->timing.pixelclock.typ)
-                       printf("Warning: please adjust ltdc pixel clock\n");
-       }
+       debug("%s: Set pixel clock req %d hz get %d hz\n", __func__,
+             priv->timing.pixelclock.typ, rate);
 
        /* TODO Below parameters are hard-coded for the moment... */
        priv->l2bpp = VIDEO_BPP16;