]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
xilinx: zynqmp: get chip ID using firmware driver
authorIbai Erkiaga <ibai.erkiaga-elorza@xilinx.com>
Tue, 4 Aug 2020 22:17:28 +0000 (23:17 +0100)
committerMichal Simek <michal.simek@xilinx.com>
Thu, 20 Aug 2020 07:49:20 +0000 (09:49 +0200)
Current implementation for getting chip ID uses either raw access on EL3
or a SMC call to get the silicon information. Following change
simplifies the code using always the firmware driver.

Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
board/xilinx/zynqmp/zynqmp.c

index 8a4df6fc1ab6f882b13958687c572f57e196f1c4..cf5febc4c41c90e048d5563124a26a76e11692b2 100644 (file)
@@ -199,60 +199,34 @@ static const struct {
 
 int chip_id(unsigned char id)
 {
-       struct pt_regs regs;
        int val = -EINVAL;
+       u32 ret_payload[PAYLOAD_ARG_CNT];
 
-       if (current_el() != 3) {
-               regs.regs[0] = ZYNQMP_SIP_SVC_CSU_DMA_CHIPID;
-               regs.regs[1] = 0;
-               regs.regs[2] = 0;
-               regs.regs[3] = 0;
-
-               smc_call(&regs);
-
-               /*
-                * SMC returns:
-                * regs[0][31:0]  = status of the operation
-                * regs[0][63:32] = CSU.IDCODE register
-                * regs[1][31:0]  = CSU.version register
-                * regs[1][63:32] = CSU.IDCODE2 register
-                */
-               switch (id) {
-               case IDCODE:
-                       regs.regs[0] = upper_32_bits(regs.regs[0]);
-                       regs.regs[0] &= ZYNQMP_CSU_IDCODE_DEVICE_CODE_MASK |
-                                       ZYNQMP_CSU_IDCODE_SVD_MASK;
-                       regs.regs[0] >>= ZYNQMP_CSU_IDCODE_SVD_SHIFT;
-                       val = regs.regs[0];
-                       break;
-               case VERSION:
-                       regs.regs[1] = lower_32_bits(regs.regs[1]);
-                       regs.regs[1] &= ZYNQMP_CSU_SILICON_VER_MASK;
-                       val = regs.regs[1];
-                       break;
-               case IDCODE2:
-                       regs.regs[1] = lower_32_bits(regs.regs[1]);
-                       regs.regs[1] >>= ZYNQMP_CSU_VERSION_EMPTY_SHIFT;
-                       val = regs.regs[1];
-                       break;
-               default:
-                       printf("%s, Invalid Req:0x%x\n", __func__, id);
-               }
-       } else {
-               switch (id) {
-               case IDCODE:
-                       val = readl(ZYNQMP_CSU_IDCODE_ADDR);
-                       val &= ZYNQMP_CSU_IDCODE_DEVICE_CODE_MASK |
-                              ZYNQMP_CSU_IDCODE_SVD_MASK;
-                       val >>= ZYNQMP_CSU_IDCODE_SVD_SHIFT;
-                       break;
-               case VERSION:
-                       val = readl(ZYNQMP_CSU_VER_ADDR);
-                       val &= ZYNQMP_CSU_SILICON_VER_MASK;
-                       break;
-               default:
-                       printf("%s, Invalid Req:0x%x\n", __func__, id);
-               }
+       xilinx_pm_request(PM_GET_CHIPID, 0, 0, 0, 0, ret_payload);
+
+       /*
+        * Firmware returns:
+        * payload[0][31:0]  = status of the operation
+        * payload[1]] = IDCODE
+        * payload[2][19:0]  = Version
+        * payload[2][28:20] = EXTENDED_IDCODE
+        * payload[2][29] = PL_INIT
+        */
+       switch (id) {
+       case IDCODE:
+               val = ret_payload[1];
+               val &= ZYNQMP_CSU_IDCODE_DEVICE_CODE_MASK |
+                       ZYNQMP_CSU_IDCODE_SVD_MASK;
+               val >>= ZYNQMP_CSU_IDCODE_SVD_SHIFT;
+               break;
+       case VERSION:
+               val = ret_payload[2] & ZYNQMP_CSU_SILICON_VER_MASK;
+               break;
+       case IDCODE2:
+               val = ret_payload[2] >> ZYNQMP_CSU_VERSION_EMPTY_SHIFT;
+               break;
+       default:
+               printf("%s, Invalid Req:0x%x\n", __func__, id);
        }
 
        return val;
@@ -277,6 +251,7 @@ static char *zynqmp_get_silicon_idcode_name(void)
 
        id = chip_id(IDCODE);
        ver = chip_id(IDCODE2);
+       debug("%s, ID: 0x%0X, Ver: 0x%0X\r\n", __func__, id, ver);
 
        for (i = 0; i < ARRAY_SIZE(zynqmp_devices); i++) {
                if (zynqmp_devices[i].id == id) {