#ifndef USE_HOSTCC
#include <common.h>
#include <bootstage.h>
-#include <bzlib.h>
#include <errno.h>
#include <fdt_support.h>
#include <lmb.h>
#include <malloc.h>
#include <mapmem.h>
#include <asm/io.h>
-#include <linux/lzo.h>
-#include <lzma/LzmaTypes.h>
-#include <lzma/LzmaDec.h>
-#include <lzma/LzmaTools.h>
#if defined(CONFIG_CMD_USB)
#include <usb.h>
#endif
}
#endif /* USE_HOSTC */
-/**
- * print_decomp_msg() - Print a suitable decompression/loading message
- *
- * @type: OS type (IH_OS_...)
- * @comp_type: Compression type being used (IH_COMP_...)
- * @is_xip: true if the load address matches the image start
- */
-static void print_decomp_msg(int comp_type, int type, bool is_xip)
-{
- const char *name = genimg_get_type_name(type);
-
- if (comp_type == IH_COMP_NONE)
- printf(" %s %s ... ", is_xip ? "XIP" : "Loading", name);
- else
- printf(" Uncompressing %s ... ", name);
-}
-
+#if !defined(USE_HOSTCC) || defined(CONFIG_FIT_SIGNATURE)
/**
* handle_decomp_error() - display a decompression error
*
*
* @comp_type: Compression type being used (IH_COMP_...)
* @uncomp_size: Number of bytes uncompressed
- * @unc_len: Amount of space available for decompression
- * @ret: Error code to report
- * @return BOOTM_ERR_RESET, indicating that the board must be reset
+ * @ret: errno error code received from compression library
+ * @return Appropriate BOOTM_ERR_ error code
*/
-static int handle_decomp_error(int comp_type, size_t uncomp_size,
- size_t unc_len, int ret)
+static int handle_decomp_error(int comp_type, size_t uncomp_size, int ret)
{
const char *name = genimg_get_comp_name(comp_type);
- if (uncomp_size >= unc_len)
+ /* ENOSYS means unimplemented compression type, don't reset. */
+ if (ret == -ENOSYS)
+ return BOOTM_ERR_UNIMPLEMENTED;
+
+ if (uncomp_size >= CONFIG_SYS_BOOTM_LEN)
printf("Image too large: increase CONFIG_SYS_BOOTM_LEN\n");
else
printf("%s: uncompress error %d\n", name, ret);
return BOOTM_ERR_RESET;
}
-
-int bootm_decomp_image(int comp, ulong load, ulong image_start, int type,
- void *load_buf, void *image_buf, ulong image_len,
- uint unc_len, ulong *load_end)
-{
- int ret = 0;
-
- *load_end = load;
- print_decomp_msg(comp, type, load == image_start);
-
- /*
- * Load the image to the right place, decompressing if needed. After
- * this, image_len will be set to the number of uncompressed bytes
- * loaded, ret will be non-zero on error.
- */
- switch (comp) {
- case IH_COMP_NONE:
- if (load == image_start)
- break;
- if (image_len <= unc_len)
- memmove_wd(load_buf, image_buf, image_len, CHUNKSZ);
- else
- ret = 1;
- break;
-#ifdef CONFIG_GZIP
- case IH_COMP_GZIP: {
- ret = gunzip(load_buf, unc_len, image_buf, &image_len);
- break;
- }
-#endif /* CONFIG_GZIP */
-#ifdef CONFIG_BZIP2
- case IH_COMP_BZIP2: {
- uint size = unc_len;
-
- /*
- * If we've got less than 4 MB of malloc() space,
- * use slower decompression algorithm which requires
- * at most 2300 KB of memory.
- */
- ret = BZ2_bzBuffToBuffDecompress(load_buf, &size,
- image_buf, image_len,
- CONFIG_SYS_MALLOC_LEN < (4096 * 1024), 0);
- image_len = size;
- break;
- }
-#endif /* CONFIG_BZIP2 */
-#ifdef CONFIG_LZMA
- case IH_COMP_LZMA: {
- SizeT lzma_len = unc_len;
-
- ret = lzmaBuffToBuffDecompress(load_buf, &lzma_len,
- image_buf, image_len);
- image_len = lzma_len;
- break;
- }
-#endif /* CONFIG_LZMA */
-#ifdef CONFIG_LZO
- case IH_COMP_LZO: {
- size_t size = unc_len;
-
- ret = lzop_decompress(image_buf, image_len, load_buf, &size);
- image_len = size;
- break;
- }
-#endif /* CONFIG_LZO */
-#ifdef CONFIG_LZ4
- case IH_COMP_LZ4: {
- size_t size = unc_len;
-
- ret = ulz4fn(image_buf, image_len, load_buf, &size);
- image_len = size;
- break;
- }
-#endif /* CONFIG_LZ4 */
- default:
- printf("Unimplemented compression type %d\n", comp);
- return BOOTM_ERR_UNIMPLEMENTED;
- }
-
- if (ret)
- return handle_decomp_error(comp, image_len, unc_len, ret);
- *load_end = load + image_len;
-
- puts("OK\n");
-
- return 0;
-}
+#endif
#ifndef USE_HOSTCC
static int bootm_load_os(bootm_headers_t *images, int boot_progress)
load_buf = map_sysmem(load, 0);
image_buf = map_sysmem(os.image_start, image_len);
- err = bootm_decomp_image(os.comp, load, os.image_start, os.type,
- load_buf, image_buf, image_len,
- CONFIG_SYS_BOOTM_LEN, &load_end);
+ err = image_decomp(os.comp, load, os.image_start, os.type,
+ load_buf, image_buf, image_len,
+ CONFIG_SYS_BOOTM_LEN, &load_end);
if (err) {
+ err = handle_decomp_error(os.comp, load_end - load, err);
bootstage_error(BOOTSTAGE_ID_DECOMP_IMAGE);
return err;
}
#else /* USE_HOSTCC */
-void memmove_wd(void *to, void *from, size_t len, ulong chunksz)
-{
- memmove(to, from, len);
-}
-
#if defined(CONFIG_FIT_SIGNATURE)
static int bootm_host_load_image(const void *fit, int req_image_type)
{
/* Allow the image to expand by a factor of 4, should be safe */
load_buf = malloc((1 << 20) + len * 4);
- ret = bootm_decomp_image(imape_comp, 0, data, image_type, load_buf,
- (void *)data, len, CONFIG_SYS_BOOTM_LEN,
- &load_end);
+ ret = image_decomp(imape_comp, 0, data, image_type, load_buf,
+ (void *)data, len, CONFIG_SYS_BOOTM_LEN,
+ &load_end);
free(load_buf);
- if (ret && ret != BOOTM_ERR_UNIMPLEMENTED)
- return ret;
+ if (ret) {
+ ret = handle_decomp_error(imape_comp, load_end - 0, ret);
+ if (ret != BOOTM_ERR_UNIMPLEMENTED)
+ return ret;
+ }
return 0;
}
#include <linux/errno.h>
#include <asm/io.h>
+#include <bzlib.h>
+#include <linux/lzo.h>
+#include <lzma/LzmaTypes.h>
+#include <lzma/LzmaDec.h>
+#include <lzma/LzmaTools.h>
+
#ifdef CONFIG_CMD_BDI
extern int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
#endif
}
}
+/**
+ * print_decomp_msg() - Print a suitable decompression/loading message
+ *
+ * @type: OS type (IH_OS_...)
+ * @comp_type: Compression type being used (IH_COMP_...)
+ * @is_xip: true if the load address matches the image start
+ */
+static void print_decomp_msg(int comp_type, int type, bool is_xip)
+{
+ const char *name = genimg_get_type_name(type);
+
+ if (comp_type == IH_COMP_NONE)
+ printf(" %s %s\n", is_xip ? "XIP" : "Loading", name);
+ else
+ printf(" Uncompressing %s\n", name);
+}
+
+int image_decomp(int comp, ulong load, ulong image_start, int type,
+ void *load_buf, void *image_buf, ulong image_len,
+ uint unc_len, ulong *load_end)
+{
+ int ret = 0;
+
+ *load_end = load;
+ print_decomp_msg(comp, type, load == image_start);
+
+ /*
+ * Load the image to the right place, decompressing if needed. After
+ * this, image_len will be set to the number of uncompressed bytes
+ * loaded, ret will be non-zero on error.
+ */
+ switch (comp) {
+ case IH_COMP_NONE:
+ if (load == image_start)
+ break;
+ if (image_len <= unc_len)
+ memmove_wd(load_buf, image_buf, image_len, CHUNKSZ);
+ else
+ ret = -ENOSPC;
+ break;
+#ifdef CONFIG_GZIP
+ case IH_COMP_GZIP: {
+ ret = gunzip(load_buf, unc_len, image_buf, &image_len);
+ break;
+ }
+#endif /* CONFIG_GZIP */
+#ifdef CONFIG_BZIP2
+ case IH_COMP_BZIP2: {
+ uint size = unc_len;
+
+ /*
+ * If we've got less than 4 MB of malloc() space,
+ * use slower decompression algorithm which requires
+ * at most 2300 KB of memory.
+ */
+ ret = BZ2_bzBuffToBuffDecompress(load_buf, &size,
+ image_buf, image_len,
+ CONFIG_SYS_MALLOC_LEN < (4096 * 1024), 0);
+ image_len = size;
+ break;
+ }
+#endif /* CONFIG_BZIP2 */
+#ifdef CONFIG_LZMA
+ case IH_COMP_LZMA: {
+ SizeT lzma_len = unc_len;
+
+ ret = lzmaBuffToBuffDecompress(load_buf, &lzma_len,
+ image_buf, image_len);
+ image_len = lzma_len;
+ break;
+ }
+#endif /* CONFIG_LZMA */
+#ifdef CONFIG_LZO
+ case IH_COMP_LZO: {
+ size_t size = unc_len;
+
+ ret = lzop_decompress(image_buf, image_len, load_buf, &size);
+ image_len = size;
+ break;
+ }
+#endif /* CONFIG_LZO */
+#ifdef CONFIG_LZ4
+ case IH_COMP_LZ4: {
+ size_t size = unc_len;
+
+ ret = ulz4fn(image_buf, image_len, load_buf, &size);
+ image_len = size;
+ break;
+ }
+#endif /* CONFIG_LZ4 */
+ default:
+ printf("Unimplemented compression type %d\n", comp);
+ return -ENOSYS;
+ }
+
+ *load_end = load + image_len;
+
+ return ret;
+}
+
#ifndef USE_HOSTCC
#if CONFIG_IS_ENABLED(LEGACY_IMAGE_FORMAT)
memmove(to, from, len);
#endif /* CONFIG_HW_WATCHDOG || CONFIG_WATCHDOG */
}
+#else /* USE_HOSTCC */
+void memmove_wd(void *to, void *from, size_t len, ulong chunksz)
+{
+ memmove(to, from, len);
+}
#endif /* !USE_HOSTCC */
void genimg_print_size(uint32_t size)
void arch_preboot_os(void);
-/**
- * bootm_decomp_image() - decompress the operating system
- *
- * @comp: Compression algorithm that is used (IH_COMP_...)
- * @load: Destination load address in U-Boot memory
- * @image_start Image start address (where we are decompressing from)
- * @type: OS type (IH_OS_...)
- * @load_bug: Place to decompress to
- * @image_buf: Address to decompress from
- * @image_len: Number of bytes in @image_buf to decompress
- * @unc_len: Available space for decompression
- * @return 0 if OK, -ve on error (BOOTM_ERR_...)
- */
-int bootm_decomp_image(int comp, ulong load, ulong image_start, int type,
- void *load_buf, void *image_buf, ulong image_len,
- uint unc_len, ulong *load_end);
-
/*
* boards should define this to disable devices when EFI exits from boot
* services.
}
#endif /* USE_HOSTCC */
+/**
+ * image_decomp() - decompress an image
+ *
+ * @comp: Compression algorithm that is used (IH_COMP_...)
+ * @load: Destination load address in U-Boot memory
+ * @image_start Image start address (where we are decompressing from)
+ * @type: OS type (IH_OS_...)
+ * @load_bug: Place to decompress to
+ * @image_buf: Address to decompress from
+ * @image_len: Number of bytes in @image_buf to decompress
+ * @unc_len: Available space for decompression
+ * @return 0 if OK, -ve on error (BOOTM_ERR_...)
+ */
+int image_decomp(int comp, ulong load, ulong image_start, int type,
+ void *load_buf, void *image_buf, ulong image_len,
+ uint unc_len, ulong *load_end);
+
/**
* Set up properties in the FDT
*
unc_len = strlen(plain);
compress(uts, (void *)plain, unc_len, compress_buff, compress_size,
&compress_size);
- err = bootm_decomp_image(comp_type, load_addr, image_start,
- IH_TYPE_KERNEL, map_sysmem(load_addr, 0),
- compress_buff, compress_size, unc_len,
- &load_end);
+ err = image_decomp(comp_type, load_addr, image_start,
+ IH_TYPE_KERNEL, map_sysmem(load_addr, 0),
+ compress_buff, compress_size, unc_len,
+ &load_end);
ut_assertok(err);
- err = bootm_decomp_image(comp_type, load_addr, image_start,
- IH_TYPE_KERNEL, map_sysmem(load_addr, 0),
- compress_buff, compress_size, unc_len - 1,
- &load_end);
+ err = image_decomp(comp_type, load_addr, image_start,
+ IH_TYPE_KERNEL, map_sysmem(load_addr, 0),
+ compress_buff, compress_size, unc_len - 1,
+ &load_end);
ut_assert(err);
/* We can't detect corruption when not decompressing */
return 0;
memset(compress_buff + compress_size / 2, '\x49',
compress_size / 2);
- err = bootm_decomp_image(comp_type, load_addr, image_start,
- IH_TYPE_KERNEL, map_sysmem(load_addr, 0),
- compress_buff, compress_size, 0x10000,
- &load_end);
+ err = image_decomp(comp_type, load_addr, image_start,
+ IH_TYPE_KERNEL, map_sysmem(load_addr, 0),
+ compress_buff, compress_size, 0x10000,
+ &load_end);
ut_assert(err);
return 0;
projects / u-boot.git / commitdiff