arm: omap3: Cleanup sys_info to fit OMAP3 booting with LTO

With LTO enabled, some functions appear to be optimized in a
way that causes hanging on some OMAP3 boards after some
unrelated patches were applied.  The solution appears to make
several functions __used.  There also appears be to be some
dead code, so remove it while cleaning this up.

This has been tested on a general purpose OMAP3530, DM3730,
and AM3517.

Signed-off-by: Adam Ford <aford173@gmail.com>

diff --git a/arch/arm/include/asm/arch-omap3/sys_proto.h b/arch/arm/include/asm/arch-omap3/sys_proto.h
index a6e9ff84aa0abce3da1110e19eab9aad5ee60d7e..e7078a32dbe551aa85ae26781a1e0eaf75efe4e9 100644 (file)
--- a/arch/arm/include/asm/arch-omap3/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap3/sys_proto.h
@@ -45,16 +45,12 @@ void gpmc_init(void);
 void enable_gpmc_cs_config(const u32 *gpmc_config, const struct gpmc_cs *cs,
                                u32 base, u32 size);
 void set_gpmc_cs0(int flash_type);
-
 void watchdog_init(void);
 void set_muxconf_regs(void);
-
 u32 get_cpu_family(void);
 u32 get_cpu_rev(void);
-u32 get_sku_id(void);
 u32 is_gpmc_muxed(void);
 u32 get_gpmc0_type(void);
-u32 get_gpmc0_width(void);
 u32 is_running_in_sdram(void);
 u32 is_running_in_sram(void);
 u32 is_running_in_flash(void);

diff --git a/arch/arm/mach-omap2/omap3/sys_info.c b/arch/arm/mach-omap2/omap3/sys_info.c
index ac72633c20f8a10982649dbf07c1dec7dea8f218..5f535e2782770690c1de56a37e091a7c8c9bbca6 100644 (file)
--- a/arch/arm/mach-omap2/omap3/sys_info.c
+++ b/arch/arm/mach-omap2/omap3/sys_info.c
@@ -55,7 +55,7 @@ void omap_die_id(unsigned int *die_id)
 /******************************************
  * get_cpu_type(void) - extract cpu info
  ******************************************/
-u32 get_cpu_type(void)
+static u32 get_cpu_type(void)
 {
        return readl(&ctrl_base->ctrl_omap_stat);
 }
@@ -64,7 +64,7 @@ u32 get_cpu_type(void)
  * get_cpu_id(void) - extract cpu id
  * returns 0 for ES1.0, cpuid otherwise
  ******************************************/
-u32 get_cpu_id(void)
+static u32 get_cpu_id(void)
 {
        struct ctrl_id *id_base;
        u32 cpuid = 0;
@@ -89,7 +89,7 @@ u32 get_cpu_id(void)
 /******************************************
  * get_cpu_family(void) - extract cpu info
  ******************************************/
-u32 get_cpu_family(void)
+__used u32 get_cpu_family(void)
 {
        u16 hawkeye;
        u32 cpu_family;
@@ -119,7 +119,7 @@ u32 get_cpu_family(void)
 /******************************************
  * get_cpu_rev(void) - extract version info
  ******************************************/
-u32 get_cpu_rev(void)
+__used u32 get_cpu_rev(void)
 {
        u32 cpuid = get_cpu_id();
 
@@ -132,41 +132,12 @@ u32 get_cpu_rev(void)
 /*****************************************************************
  * get_sku_id(void) - read sku_id to get info on max clock rate
  *****************************************************************/
-u32 get_sku_id(void)
+static u32 get_sku_id(void)
 {
        struct ctrl_id *id_base = (struct ctrl_id *)OMAP34XX_ID_L4_IO_BASE;
        return readl(&id_base->sku_id) & SKUID_CLK_MASK;
 }
 
-/***************************************************************************
- *  get_gpmc0_base() - Return current address hardware will be
- *     fetching from. The below effectively gives what is correct, its a bit
- *   mis-leading compared to the TRM.  For the most general case the mask
- *   needs to be also taken into account this does work in practice.
- *   - for u-boot we currently map:
- *       -- 0 to nothing,
- *       -- 4 to flash
- *       -- 8 to enent
- *       -- c to wifi
- ****************************************************************************/
-u32 get_gpmc0_base(void)
-{
-       u32 b;
-
-       b = readl(&gpmc_cfg->cs[0].config7);
-       b &= 0x1F;              /* keep base [5:0] */
-       b = b << 24;            /* ret 0x0b000000 */
-       return b;
-}
-
-/*******************************************************************
- * get_gpmc0_width() - See if bus is in x8 or x16 (mainly for nand)
- *******************************************************************/
-u32 get_gpmc0_width(void)
-{
-       return WIDTH_16BIT;
-}
-
 /*************************************************************************
  * get_board_rev() - setup to pass kernel board revision information
  * returns:(bit[0-3] sub version, higher bit[7-4] is higher version)