default ""
help
Set the key hash for U-Boot here if public/private key pair used to
- sign U-boot are different from the SRK hash put in the fuse. Example
+ sign U-Boot are different from the SRK hash put in the fuse. Example
of a key hash is
41066b564c6ffcef40ccbc1e0a5d0d519604000c785d97bbefd25e4d288d1c8b.
Otherwise leave this empty.
/*
* We add memory barriers for __raw_readX / __raw_writeX accessors same way as
- * it is done for readX and writeX accessors as lots of U-boot driver uses
+ * it is done for readX and writeX accessors as lots of U-Boot driver uses
* __raw_readX / __raw_writeX instead of proper accessor with barrier.
*/
#define __raw_writeb(v, c) ({ __iowmb(); __arch_putb(v, c); })
config ARMV7_SET_CORTEX_SMPEN
bool
help
- Enable the ARM Cortex ACTLR.SMP enable bit in U-boot.
+ Enable the ARM Cortex ACTLR.SMP enable bit in U-Boot.
config SPL_ARMV7_SET_CORTEX_SMPEN
bool
bool "Enable PSCI support" if EXPERT
help
PSCI is Power State Coordination Interface defined by ARM.
- The PSCI in U-boot provides a general framework and each platform
+ The PSCI in U-Boot provides a general framework and each platform
can implement their own specific PSCI functions.
Say Y here to enable PSCI support on ARMv8 platform.
from the location where it is stored(NOR, NAND, SD, SATA, USB)during
u-boot booting.If this variable is not defined then MC_BOOT_ENV_VAR
will be null and MC will not be booted and DPL will not be applied
- during U-boot booting.However the MC, DPC and DPL can be applied from
+ during U-Boot booting.However the MC, DPC and DPL can be applied from
console independently.
The variable needs to be set from the console once and then on
rebooting the parameters set in the variable will automatically be
idle-states {
/*
- * PSCI node is not added default, U-boot will add missing
+ * PSCI node is not added default, U-Boot will add missing
* parts if it determines to use PSCI.
*/
entry-method = "psci";
*/
/ {
- /* Keep HW order from U-boot */
+ /* Keep HW order from U-Boot */
aliases {
/delete-property/ mmc0;
/delete-property/ mmc1;
*/
/ {
- /* Keep HW order from U-boot */
+ /* Keep HW order from U-Boot */
aliases {
/delete-property/ mmc0;
/delete-property/ mmc1;
};
&gmac2phy {
- /* Integrated PHY unsupported by U-boot */
+ /* Integrated PHY unsupported by U-Boot */
status = "broken";
};
};
/*
- * U-boot Specific Change
+ * U-Boot Specific Change
*
* The OTG controller must come after the USB host pair for it
* to work. This is likely due to lack of support for the USB
*
* -PCIe
* -there is a range of stream IDs set aside for PCI in this
- * file. U-boot will scan the PCI bus and for each device discovered:
+ * file. U-Boot will scan the PCI bus and for each device discovered:
* -allocate a streamID
* -set a PEXn LUT table entry mapping 'requester ID' to 'stream ID'
* -set a msi-map entry in the PEXn controller node in the
*
* -PCIe
* -there is a range of stream IDs set aside for PCI in this
- * file. U-boot will scan the PCI bus and for each device discovered:
+ * file. U-Boot will scan the PCI bus and for each device discovered:
* -allocate a streamID
* -set a PEXn LUT table entry mapping 'requester ID' to 'stream ID'
* -set a msi-map entry in the PEXn controller node in the
gpio_direction_input(USDHC2_CD_GPIO);
/*
* According to the board_mmc_init() the following map is done:
- * (U-boot device node) (Physical Port)
+ * (U-Boot device node) (Physical Port)
* mmc0 USDHC2
* mmc1 USDHC4
*/
- see also doc/SPL/README.am335x-network
- set the jumper into netboot mode
-- compile the U-boot sources with:
+- compile the U-Boot sources with:
make am335x_shc_netboot_defconfig
make all
- copy the images into your tftp boot directory
int i, ret;
/*
* According to the board_mmc_init() the following map is done:
- * (U-boot device node) (Physical Port)
+ * (U-Boot device node) (Physical Port)
* mmc0 USDHC1
* mmc2 USDHC3 (eMMC)
*/
Note of warning:
================
-U-boot has a *strong* dependency with the l-loader and the arm trusted firmware
+U-Boot has a *strong* dependency with the l-loader and the arm trusted firmware
repositories.
The boot sequence is:
/* GPIO0_27 and GPIO0_26 are used to read board revision from IGEP003x boards
* and control IGEP0034 green and red LEDs.
- * U-boot configures these pins as input pullup to detect board revision:
+ * U-Boot configures these pins as input pullup to detect board revision:
* IGEP0034-LITE = 0b00
* IGEP0034 (FULL) = 0b01
* IGEP0033 = 0b1X
* IGEP00x0 boards. First of all, it is necessary to reset USB transceiver from
* IGEP0030 in order to read GPIO_IGEP00X0_BOARD_DETECTION correctly, because
* this functionality is shared by USB HOST.
- * Once USB reset is applied, U-boot configures these pins as input pullup to
+ * Once USB reset is applied, U-Boot configures these pins as input pullup to
* detect board and revision:
* IGEP0020-RF = 0b00
* IGEP0020-RC = 0b01
Page size of inventory in EEPROM.
config PG_WCOM_UBOOT_UPDATE_SUPPORTED
- bool "Enable U-boot Field Fail-Safe Update Functionality"
+ bool "Enable U-Boot Field Fail-Safe Update Functionality"
select EVENT
default n
help
from parallel NOR flash.
config PG_WCOM_UBOOT_BOOTPACKAGE
- bool "U-boot Is Part Of Factory Boot-Package Image"
+ bool "U-Boot Is Part Of Factory Boot-Package Image"
default n
help
Indicates that u-boot will be a part of the factory programmed
Has to be set for original u-boot programmed at factory.
config PG_WCOM_UBOOT_UPDATE_TEXT_BASE
- hex "Text Base For U-boot Programmed Outside Factory"
+ hex "Text Base For U-Boot Programmed Outside Factory"
default 0xFFFFFFFF
help
Text base of an updated u-boot that is not factory programmed but
Has to be set for original u-boot programmed at factory.
config PG_WCOM_UBOOT_UPDATE
- bool "U-boot Is Part Of Factory Boot-Package Image"
+ bool "U-Boot Is Part Of Factory Boot-Package Image"
default n
help
Indicates that u-boot will be a part of the embedded software and
-Field Fail-Save U-boot Update
+Field Fail-Save U-Boot Update
-----------------------------
Field Fail-Save u-boot update is a feature that allows save u-boot update
of FOX and XMC products that are rolled out in the field.
/*
* According to the board_mmc_init() the following map is done:
- * (U-boot device node) (Physical Port)
+ * (U-Boot device node) (Physical Port)
* mmc0 USDHC1
* mmc1 USDHC2
*/
Flashing U-Boot onto an SD card
-------------------------------
-After a successful build, the generated SPL and U-boot binaries can be copied
+After a successful build, the generated SPL and U-Boot binaries can be copied
to an SD card. Adjust the SD card device as necessary:
$ sudo dd if=u-boot-with-spl.imx of=/dev/mmcblk0 bs=1k seek=1
-This is equivalent to separately copying the SPL and U-boot using:
+This is equivalent to separately copying the SPL and U-Boot using:
$ sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1
$ sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 bs=1k seek=197
The default bootscripts expect a kernel fit-image file named "fitImage" in the
first partition and Linux ext4 rootfs in the second partition.
-Flashing U-boot to the SPI Flash, for booting Linux from NAND
+Flashing U-Boot to the SPI Flash, for booting Linux from NAND
-------------------------------------------------------------
-The SD card created above can also be used to install the SPL and U-boot into
-the SPI flash. Boot U-boot from the SD card as above, and stop at the autoboot.
+The SD card created above can also be used to install the SPL and U-Boot into
+the SPI flash. Boot U-Boot from the SD card as above, and stop at the autoboot.
Then, clear the SPI flash:
Load the equivalent of u-boot-with-spl.imx from the raw MMC into memory and
copy to the SPI. The SPL is expected at an offset of 0x400, and its size is
maximum 392*512-byte blocks in size, therefore 0x188 blocks, totaling 0x31000
-bytes. Assume U-boot should fit into 640KiB, therefore 0x500 512-byte blocks,
+bytes. Assume U-Boot should fit into 640KiB, therefore 0x500 512-byte blocks,
totalling 0xA0000 bytes. Adding these together:
=> mmc read ${loadaddr} 0x2 0x688
=> sf write ${loadaddr} 0x400 0xD1000
-The SPL is located at offset 0x400, and U-boot at 0x31400 in SPI flash, as to
+The SPL is located at offset 0x400, and U-Boot at 0x31400 in SPI flash, as to
match the SD Card layout. This would allow, instead of reading from the SD Card
above, with networking and TFTP correctly configured, the equivalent of:
The "bootm_size" variable in the environment
--------------------------------------------
-By default, U-boot relocates the device tree towards the upper end of the RAM,
+By default, U-Boot relocates the device tree towards the upper end of the RAM,
which kernels using CONFIG_HIGHMEM=y may not be able to access during early
-boot. With the bootm_size variable set to 0x30000000, U-boot relocates the
+boot. With the bootm_size variable set to 0x30000000, U-Boot relocates the
device tree to below this address instead.
*
* Please read ARC HS Development IC Specification, section 17.2 for more
* information about apertures configuration.
- * NOTE: we intentionally modify default settings in U-boot. Default settings
+ * NOTE: we intentionally modify default settings in U-Boot. Default settings
* are specified in "Table 111 CREG Address Decoder register reset values".
*/
int ret;
if (board_mismatch()) {
- printf("ERR: U-boot is not configured for this board!\n");
+ printf("ERR: U-Boot is not configured for this board!\n");
return CMD_RET_FAILURE;
}
/*
* We may simply use static variable here to store init status, but we also want
- * to avoid the situation when we reload U-boot via MDB after previous
+ * to avoid the situation when we reload U-Boot via MDB after previous
* init is done but HW reset (board reset) isn't done. So let's store the
* init status in any unused register (i.e CREG_CPU_0_ENTRY) so status will
- * survive after U-boot is reloaded via MDB.
+ * survive after U-Boot is reloaded via MDB.
*/
#define INIT_MARKER_REGISTER ((void __iomem *)CREG_CPU_0_ENTRY)
/* must be equal to INIT_MARKER_REGISTER reset value */
int ret;
if (board_mismatch()) {
- printf("ERR: U-boot is not configured for this board!\n");
+ printf("ERR: U-Boot is not configured for this board!\n");
return CMD_RET_FAILURE;
}
printf("Board: Synopsys %s\n", board_name(get_board_type_runtime()));
if (board_mismatch())
- printf("WARN: U-boot is configured NOT for this board but for %s!\n",
+ printf("WARN: U-Boot is configured NOT for this board but for %s!\n",
board_name(get_board_type_config()));
reg = readl(CREG_AXI_M_HS_CORE_BOOT) & CREG_CORE_BOOT_IMAGE;
- printf("U-boot autostart: %s\n", reg ? "enabled" : "disabled");
+ printf("U-Boot autostart: %s\n", reg ? "enabled" : "disabled");
return 0;
};
header = (struct legacy_img_hdr *)fit;
if (image_get_magic(header) != FDT_MAGIC) {
- debug("No FIT image appended to U-boot\n");
+ debug("No FIT image appended to U-Boot\n");
return NULL;
}
// SPDX-License-Identifier: GPL-2.0+
/**
- * ufs.c - UFS specific U-boot commands
+ * ufs.c - UFS specific U-Boot commands
*
* Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com
*
spl_image->fdt_addr = (void *)dt_data;
if (spl_image->os == IH_OS_U_BOOT) {
- /* HACK: U-boot expects FDT at a specific address */
+ /* HACK: U-Boot expects FDT at a specific address */
fdt_hack = spl_image->load_addr + spl_image->size;
fdt_hack = (fdt_hack + 3) & ~3;
debug("Relocating FDT to %p\n", spl_image->fdt_addr);
return ret;
if (spl_image->os != IH_OS_LINUX && spl_image->os != IH_OS_TEE) {
- puts("Expected image is not found. Trying to start U-boot\n");
+ puts("Expected image is not found. Trying to start U-Boot\n");
return -ENOENT;
}
PCAP:
-U-boot supports live Ethernet packet capture in PCAP(2.4) format.
+U-Boot supports live Ethernet packet capture in PCAP(2.4) format.
This is enabled by CONFIG_CMD_PCAP.
The capture is stored on physical memory, and should be copied to
Links
=====
-[1] FriendlyArm U-boot v2016.01:
+[1] FriendlyArm U-Boot v2016.01:
https://github.com/friendlyarm/u-boot/tree/nanopi2-v2016.01
The SPL image is responsible for loading the next stage boot loader, which is
the main u-boot image. For secure boot process on these platforms ROM verifies
-SPL image, so to continue chain of trust SPL image verifies U-boot image using
+SPL image, so to continue chain of trust SPL image verifies U-Boot image using
spl_validate_uboot(). This function uses QorIQ Trust Architecture header
-(appended to U-boot image) to validate the U-boot binary just before passing
+(appended to U-Boot image) to validate the U-Boot binary just before passing
control to it.
$ make
$ export FIPDIR=$PWD/fip
-Go back to mainline U-boot source tree then :
+Go back to mainline U-Boot source tree then :
.. code-block:: bash
$ make
$ export FIPDIR=$PWD/fip
-Go back to mainline U-boot source tree then :
+Go back to mainline U-Boot source tree then :
.. code-block:: bash
$ make
$ export FIPDIR=$PWD/fip
-Go back to mainline U-boot source tree then :
+Go back to mainline U-Boot source tree then :
.. code-block:: bash
told to use a 64-bit CPU or it will boot in 32-bit mode. The -nographic argument
ensures that output appears on the terminal. Use Ctrl-A X to quit.
-Additional persistent U-boot environment support can be added as follows:
+Additional persistent U-Boot environment support can be added as follows:
- Create envstore.img using qemu-img::
openocd -f u-boot.tcl
-You should see the U-boot SPL banner followed by the banner for U-Boot proper
+You should see the U-Boot SPL banner followed by the banner for U-Boot proper
in the output of openocd. The CMSIS-DAP adapter is slow, so this can take a
long time. If you don't see it, something has gone wrong. After a while, you
should see the prompt. You can load an image using semihosting by running::
- Boot first from SD card as shown in the previous section
-In U-boot change the eMMC partition config::
+In U-Boot change the eMMC partition config::
=> mmc partconf 2 1 0 0
Unlike later SoC models the rk3066 BootROM doesn't have SDMMC support.
If all other boot options fail then it enters into a BootROM mode on the USB OTG port.
-This method loads TPL/SPL on NAND with U-boot and kernel on SD card.
+This method loads TPL/SPL on NAND with U-Boot and kernel on SD card.
SD Card
^^^^^^^
-U-boot expects a GPT partition map and a boot directory structure with files on the SD card.
+U-Boot expects a GPT partition map and a boot directory structure with files on the SD card.
.. code-block:: none
zImage
rk3066a-mk808.dtb
-To write a U-boot image to the SD card (assumed to be /dev/sda):
+To write a U-Boot image to the SD card (assumed to be /dev/sda):
.. code-block:: bash
--new=3:10280:10535 --change-name=3:env --typecode=3:3DE21764-95BD-54BD-A5C3-4ABE786F38A8 \
/dev/mtdblock0
-Write U-boot SPL and U-boot to their partitions.
+Write U-Boot SPL and U-Boot to their partitions.
.. code-block:: none
- BL33=u-boot-nodtb.bin
- BL33_CFG=u-boot.dtb
- You can also update a existing FIP after U-boot compilation with fiptool,
+ You can also update a existing FIP after U-Boot compilation with fiptool,
a tool provided by TF-A_::
# fiptool update --nt-fw u-boot-nodtb.bin --hw-config u-boot.dtb fip-stm32mp157c-ev1.bin
This board specification
------------------------
-This board is to be run as a virtual Xen [1] guest with U-boot as its primary
+This board is to be run as a virtual Xen [1] guest with U-Boot as its primary
bootloader. Xen is a type 1 hypervisor that allows multiple operating systems
to run simultaneously on a single physical server. Xen is capable of running
virtual machines in both full virtualization and para-virtualization (PV)
a guest system in the Xen domain and perform I/O operations using a special
interface provided by the virtualization system and the host system.
-Xen support for U-boot is implemented by introducing a new Xen guest ARM64
+Xen support for U-Boot is implemented by introducing a new Xen guest ARM64
board and porting essential drivers from MiniOS [3] as well as some of the work
previously done by NXP [4]:
Board limitations
-----------------
-1. U-boot runs without MMU enabled at the early stages.
+1. U-Boot runs without MMU enabled at the early stages.
According to Xen on ARM ABI (xen/include/public/arch-arm.h): all memory
which is shared with other entities in the system (including the hypervisor
and other guests) must reside in memory which is mapped as Normal Inner
2. No serial console until MMU is up.
Because data cache maintenance is required until the MMU setup the
early/debug serial console is not implemented. Therefore, we do not have
- usual prints like U-boot’s banner etc. until the serial driver is
+ usual prints like U-Boot’s banner etc. until the serial driver is
initialized.
3. Single RAM bank supported.
If a Xen guest is given much memory it is possible that Xen allocates two
memory banks for it. The first one is allocated under 4GB address space and
in some cases may represent the whole guest’s memory. It is assumed that
- U-boot most likely won’t require high memory bank for its work andlaunching
+ U-Boot most likely won’t require high memory bank for its work andlaunching
OS, so it is enough to take the first one.
This document aims to describe the bind and unbind commands.
For debugging purpose, it should be useful to bind or unbind a driver from
-the U-boot command line.
+the U-Boot command line.
The unbind command calls the remove device driver callback and unbind the
device from its driver.
if (ret)
return ret;
-Firmware loader driver is also designed to support U-boot environment
+Firmware loader driver is also designed to support U-Boot environment
variables, so all these data from FDT can be overwritten
-through the U-boot environment variable during run time.
+through the U-Boot environment variable during run time.
For examples:
When above environment variables are set, environment values would be
used instead of data from FDT.
The benefit of this design allows user to change storage attribute data
-at run time through U-boot console and saving the setting as default
+at run time through U-Boot console and saving the setting as default
environment values in the storage for the next power cycle, so no
compilation is required for both driver and FDT.
=> setenv -e -nv -bs -rt -v OsIndications =0x0000000000000004
-Since U-boot doesn't currently support SetVariable at runtime, its value
+Since U-Boot doesn't currently support SetVariable at runtime, its value
won't be taken over across the reboot. If this is the case, you can skip
this feature check with the Kconfig option (CONFIG_EFI_IGNORE_OSINDICATIONS)
set.
mkimage -T script -n 'Test script' -d boot.txt boot.scr
-The script can be execute in U-boot like this:
+The script can be execute in U-Boot like this:
.. code-block::
The Device Firmware Upgrade (DFU) allows to download and upload firmware
to/from U-Boot connected over USB.
-U-boot follows the Universal Serial Bus Device Class Specification for
+U-Boot follows the Universal Serial Bus Device Class Specification for
Device Firmware Upgrade Version 1.1 the USB forum (DFU v1.1 in www.usb.org).
U-Boot implements this DFU capability (CONFIG_DFU) with the command dfu
if (!mux)
return ERR_PTR(-ENOMEM);
- /* U-boot specific assignments */
+ /* U-Boot specific assignments */
mux->parent_names = parent_names;
mux->num_parents = num_parents;
* https://patchwork.kernel.org/patch/9148419/
* - the Toradex version by Max Krummenacher <max.krummenacher@toradex.com>:
* http://git.toradex.com/cgit/linux-toradex.git/tree/drivers/gpio/gpio-fxl6408.c?h=toradex_5.4-2.3.x-imx
- * - the U-boot PCA953x driver by Peng Fan <van.freenix@gmail.com>:
+ * - the U-Boot PCA953x driver by Peng Fan <van.freenix@gmail.com>:
* drivers/gpio/pca953x_gpio.c
*
* TODO:
bool "Enable use of 1st stage bootloader timing for NAND"
depends on NAND_ZYNQ
help
- This flag prevent U-boot reconfigure NAND flash controller and reuse
+ This flag prevent U-Boot reconfigure NAND flash controller and reuse
the NAND timing from 1st stage bootloader.
config NAND_OCTEONTX
default 5 if HAS_NAND_SMALL_BADBLOCK_POS
config SYS_NAND_U_BOOT_LOCATIONS
- bool "Define U-boot binaries locations in NAND"
+ bool "Define U-Boot binaries locations in NAND"
help
Enable CONFIG_SYS_NAND_U_BOOT_OFFS though Kconfig.
- This option should not be enabled when compiling U-boot for boards
+ This option should not be enabled when compiling U-Boot for boards
defining CONFIG_SYS_NAND_U_BOOT_OFFS in their include/configs/<board>.h
file.
#ifdef CONFIG_CHAIN_OF_TRUST
/*
- * U-Boot header is appended at end of U-boot image, so
- * calculate U-boot header address using U-boot header size.
+ * U-Boot header is appended at end of U-Boot image, so
+ * calculate U-Boot header address using U-Boot header size.
*/
#define FSL_U_BOOT_HDR_ADDR \
((CFG_SYS_NAND_U_BOOT_START + \
writel(0x1, CLASS_AXI_CTRL);
/*Make Util AXI transactions non-bufferable */
- /*Util is disabled in U-boot, do it from here */
+ /*Util is disabled in U-Boot, do it from here */
writel(0x1, UTIL_AXI_CTRL);
}
#define MV_SIP_COMPHY_PLL_LOCK 0x82000003
#define MV_SIP_COMPHY_XFI_TRAIN 0x82000004
-/* Used to distinguish between different possible callers (U-boot/Linux) */
+/* Used to distinguish between different possible callers (U-Boot/Linux) */
#define COMPHY_CALLER_UBOOT (0x1 << 21)
#define COMPHY_FW_MODE_FORMAT(mode) ((mode) << 12)
* Author: Robert Marko <robert.marko@sartura.hr>
* Author: Luka Kovacic <luka.kovacic@sartura.hr>
*
- * Based on stock U-boot and Linux drivers
+ * Based on stock U-Boot and Linux drivers
*/
#include <asm/gpio.h>
default DEFAULT_DEVICE_TREE
help
This option specifies a list of device tree files to use for DT
- control. These will be packaged into a FIT. At run-time, U-boot
+ control. These will be packaged into a FIT. At run-time, U-Boot
or SPL will select the correct DT to use by examining the
hardware (e.g. reading a board ID value). This is a list of
device tree files (without the directory or .dtb suffix)
config MULTI_DTB_FIT
bool "Support embedding several DTBs in a FIT image for u-boot"
help
- This option provides hooks to allow U-boot to parse an
+ This option provides hooks to allow U-Boot to parse an
appended FIT image and enable board specific code to then select
the correct DTB to be used. Use this if you need to support
multiple DTBs but don't use the SPL.
/*
* Read data from device specified by @desc and @part
*
- * U-boot equivalent of pread().
+ * U-Boot equivalent of pread().
*
* Return the bytes of data read.
* Return <0 for error.
* Use pointer to provide better alignment.
* - Remove max_cache_size related interfaces
* Includes free_extent_buffer_nocache()
- * As we don't cache eb in U-boot.
+ * As we don't cache eb in U-Boot.
* - Include headers
*
* Write related functions are kept as we still need to modify dummy extent
int fsl_setenv_chain_of_trust(void);
/*
- * This function is used to validate the main U-boot binary from
+ * This function is used to validate the main U-Boot binary from
* SPL just before passing control to it using QorIQ Trust
- * Architecture header (appended to U-boot image).
+ * Architecture header (appended to U-Boot image).
*/
void spl_validate_uboot(uint32_t hdr_addr, uintptr_t img_addr);
PM_FPGA_LOAD = 22,
PM_FPGA_GET_STATUS = 23,
PM_GET_CHIPID = 24,
- /* ID 25 is been used by U-boot to process secure boot images */
+ /* ID 25 is been used by U-Boot to process secure boot images */
/* Secure library generic API functions */
PM_SECURE_SHA = 26,
PM_SECURE_RSA = 27,
# Android Verified Boot 2.0 Test
"""
-This tests Android Verified Boot 2.0 support in U-boot:
+This tests Android Verified Boot 2.0 support in U-Boot:
For additional details about how to build proper vbmeta partition
check doc/android/avb2.rst
"""Set up a file system to be used in cat tests
Args:
- u_boot_config -- U-boot configuration.
+ u_boot_config -- U-Boot configuration.
"""
mnt_point = u_boot_config.persistent_data_dir + '/test_cat'
image_path = u_boot_config.persistent_data_dir + '/cat.img'
"""Set up a file system to be used in UEFI bootmanager tests.
Args:
- u_boot_config -- U-boot configuration.
+ u_boot_config -- U-Boot configuration.
Return:
A path to disk image to be used for testing
for testing.
request -- Pytest request object.
- u_boot_config -- U-boot configuration.
+ u_boot_config -- U-Boot configuration.
"""
mnt_point = u_boot_config.persistent_data_dir + '/test_efi_capsule'
data_dir = mnt_point + CAPSULE_DATA_DIR
Args:
request: Pytest request object.
- u_boot_config: U-boot configuration.
+ u_boot_config: U-Boot configuration.
Return:
A path to disk image to be used for testing
Args:
request: Pytest request object.
- u_boot_config: U-boot configuration.
+ u_boot_config: U-Boot configuration.
Return:
A path to disk image to be used for testing
tests
Args:
- u_boot_config -- U-boot configuration.
+ u_boot_config -- U-Boot configuration.
Return:
A path to disk image to be used for testing
# Helper functions
#
def fstype_to_ubname(fs_type):
- """Convert a file system type to an U-boot specific string
+ """Convert a file system type to an U-Boot specific string
A generated string can be used as part of file system related commands
or a config name in u-boot. Currently fat16 and fat32 are handled
Args:
request: Pytest request object.
- u_boot_config: U-boot configuration.
+ u_boot_config: U-Boot configuration.
Return:
A fixture for basic fs test, i.e. a triplet of file system type,
Args:
request: Pytest request object.
- u_boot_config: U-boot configuration.
+ u_boot_config: U-Boot configuration.
Return:
A fixture for extended fs test, i.e. a triplet of file system type,
Args:
request: Pytest request object.
- u_boot_config: U-boot configuration.
+ u_boot_config: U-Boot configuration.
Return:
A fixture for mkdir test, i.e. a duplet of file system type and
Args:
request: Pytest request object.
- u_boot_config: U-boot configuration.
+ u_boot_config: U-Boot configuration.
Return:
A fixture for unlink test, i.e. a duplet of file system type and
Args:
request: Pytest request object.
- u_boot_config: U-boot configuration.
+ u_boot_config: U-Boot configuration.
Return:
A fixture for basic fs test, i.e. a triplet of file system type,
# SCP03 command test
"""
-This tests SCP03 command in U-boot.
+This tests SCP03 command in U-Boot.
For additional details check doc/usage/scp03.rst
"""
"""Set up a file system to be used in xxd tests
Args:
- u_boot_config -- U-boot configuration.
+ u_boot_config -- U-Boot configuration.
"""
mnt_point = u_boot_config.persistent_data_dir + '/test_xxd'
image_path = u_boot_config.persistent_data_dir + '/xxd.img'
projects / u-boot.git / commitdiff