]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
ARM: OMAP5: DRA7xx: support class 0 optimized voltages
authorNishanth Menon <nm@ti.com>
Thu, 30 May 2013 03:19:31 +0000 (03:19 +0000)
committerTom Rini <trini@ti.com>
Mon, 10 Jun 2013 12:43:10 +0000 (08:43 -0400)
DRA752 now uses AVS Class 0 voltages which are voltages in efuse.

This means that we can now use the optimized voltages which are
stored as mV values in efuse and program PMIC accordingly.

This allows us to go with higher OPP as needed in the system without
the need for implementing complex AVS logic.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
arch/arm/cpu/armv7/omap-common/clocks-common.c
arch/arm/cpu/armv7/omap5/hw_data.c
arch/arm/include/asm/arch-omap5/clock.h
arch/arm/include/asm/omap_common.h

index 6c8226d39327eecff443f265de5b8a1725284140..9c75c13c9f0a8f925ea2f877fecfee6dd9c8fa6d 100644 (file)
@@ -521,6 +521,38 @@ void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic)
                gpio_direction_output(pmic->gpio, 1);
 }
 
+static u32 optimize_vcore_voltage(struct volts const *v)
+{
+       u32 val;
+       if (!v->value)
+               return 0;
+       if (!v->efuse.reg)
+               return v->value;
+
+       switch (v->efuse.reg_bits) {
+       case 16:
+               val = readw(v->efuse.reg);
+               break;
+       case 32:
+               val = readl(v->efuse.reg);
+               break;
+       default:
+               printf("Error: efuse 0x%08x bits=%d unknown\n",
+                      v->efuse.reg, v->efuse.reg_bits);
+               return v->value;
+       }
+
+       if (!val) {
+               printf("Error: efuse 0x%08x bits=%d val=0, using %d\n",
+                      v->efuse.reg, v->efuse.reg_bits, v->value);
+               return v->value;
+       }
+
+       debug("%s:efuse 0x%08x bits=%d Vnom=%d, using efuse value %d\n",
+             __func__, v->efuse.reg, v->efuse.reg_bits, v->value, val);
+       return val;
+}
+
 /*
  * Setup the voltages for vdd_mpu, vdd_core, and vdd_iva
  * We set the maximum voltages allowed here because Smart-Reflex is not
@@ -529,11 +561,13 @@ void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic)
  */
 void scale_vcores(struct vcores_data const *vcores)
 {
-       do_scale_vcore(vcores->core.addr, vcores->core.value,
-                                         vcores->core.pmic);
+       u32 val;
+
+       val = optimize_vcore_voltage(&vcores->core);
+       do_scale_vcore(vcores->core.addr, val, vcores->core.pmic);
 
-       do_scale_vcore(vcores->mpu.addr, vcores->mpu.value,
-                                         vcores->mpu.pmic);
+       val = optimize_vcore_voltage(&vcores->mpu);
+       do_scale_vcore(vcores->mpu.addr, val, vcores->mpu.pmic);
 
        /* Configure MPU ABB LDO after scale */
        abb_setup((*ctrl)->control_std_fuse_opp_vdd_mpu_2,
@@ -544,17 +578,17 @@ void scale_vcores(struct vcores_data const *vcores)
                  OMAP_ABB_MPU_TXDONE_MASK,
                  OMAP_ABB_FAST_OPP);
 
-       do_scale_vcore(vcores->mm.addr, vcores->mm.value,
-                                         vcores->mm.pmic);
+       val = optimize_vcore_voltage(&vcores->mm);
+       do_scale_vcore(vcores->mm.addr, val, vcores->mm.pmic);
 
-       do_scale_vcore(vcores->gpu.addr, vcores->gpu.value,
-                      vcores->gpu.pmic);
+       val = optimize_vcore_voltage(&vcores->gpu);
+       do_scale_vcore(vcores->gpu.addr, val, vcores->gpu.pmic);
 
-       do_scale_vcore(vcores->eve.addr, vcores->eve.value,
-                      vcores->eve.pmic);
+       val = optimize_vcore_voltage(&vcores->eve);
+       do_scale_vcore(vcores->eve.addr, val, vcores->eve.pmic);
 
-       do_scale_vcore(vcores->iva.addr, vcores->iva.value,
-                      vcores->iva.pmic);
+       val = optimize_vcore_voltage(&vcores->iva);
+       do_scale_vcore(vcores->iva.addr, val, vcores->iva.pmic);
 
         if (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3) {
                /* Configure LDO SRAM "magic" bits */
index 90274a02cfdeeac70af20108ec29bb329216c446..bddcaed179798293428dd6ff48bd2dbee5833001 100644 (file)
@@ -338,22 +338,32 @@ struct vcores_data omap5430_volts_es2 = {
 
 struct vcores_data dra752_volts = {
        .mpu.value      = VDD_MPU_DRA752,
+       .mpu.efuse.reg  = STD_FUSE_OPP_VMIN_MPU_NOM,
+       .mpu.efuse.reg_bits     = DRA752_EFUSE_REGBITS,
        .mpu.addr       = TPS659038_REG_ADDR_SMPS12_MPU,
        .mpu.pmic       = &tps659038,
 
        .eve.value      = VDD_EVE_DRA752,
+       .eve.efuse.reg  = STD_FUSE_OPP_VMIN_DSPEVE_NOM,
+       .eve.efuse.reg_bits     = DRA752_EFUSE_REGBITS,
        .eve.addr       = TPS659038_REG_ADDR_SMPS45_EVE,
        .eve.pmic       = &tps659038,
 
        .gpu.value      = VDD_GPU_DRA752,
+       .gpu.efuse.reg  = STD_FUSE_OPP_VMIN_GPU_NOM,
+       .gpu.efuse.reg_bits     = DRA752_EFUSE_REGBITS,
        .gpu.addr       = TPS659038_REG_ADDR_SMPS6_GPU,
        .gpu.pmic       = &tps659038,
 
        .core.value     = VDD_CORE_DRA752,
+       .core.efuse.reg = STD_FUSE_OPP_VMIN_CORE_NOM,
+       .core.efuse.reg_bits = DRA752_EFUSE_REGBITS,
        .core.addr      = TPS659038_REG_ADDR_SMPS7_CORE,
        .core.pmic      = &tps659038,
 
        .iva.value      = VDD_IVA_DRA752,
+       .iva.efuse.reg  = STD_FUSE_OPP_VMIN_IVA_NOM,
+       .iva.efuse.reg_bits     = DRA752_EFUSE_REGBITS,
        .iva.addr       = TPS659038_REG_ADDR_SMPS8_IVA,
        .iva.pmic       = &tps659038,
 };
index f7ddd5ffe51db6e4d538aabbef28641c967583b9..6d02835ead57ccb2fb0b341cb9bf7cd28f918db9 100644 (file)
 #define VDD_CORE_DRA752                1030
 #define VDD_IVA_DRA752         1060
 
+/* Efuse register offsets for DRA7xx platform */
+#define DRA752_EFUSE_BASE      0x4A002000
+#define DRA752_EFUSE_REGBITS   16
+/* STD_FUSE_OPP_VMIN_IVA_2 */
+#define STD_FUSE_OPP_VMIN_IVA_NOM      (DRA752_EFUSE_BASE + 0x05CC)
+/* STD_FUSE_OPP_VMIN_IVA_3 */
+#define STD_FUSE_OPP_VMIN_IVA_OD       (DRA752_EFUSE_BASE + 0x05D0)
+/* STD_FUSE_OPP_VMIN_IVA_4 */
+#define STD_FUSE_OPP_VMIN_IVA_HIGH     (DRA752_EFUSE_BASE + 0x05D4)
+/* STD_FUSE_OPP_VMIN_DSPEVE_2 */
+#define STD_FUSE_OPP_VMIN_DSPEVE_NOM   (DRA752_EFUSE_BASE + 0x05E0)
+/* STD_FUSE_OPP_VMIN_DSPEVE_3 */
+#define STD_FUSE_OPP_VMIN_DSPEVE_OD    (DRA752_EFUSE_BASE + 0x05E4)
+/* STD_FUSE_OPP_VMIN_DSPEVE_4 */
+#define STD_FUSE_OPP_VMIN_DSPEVE_HIGH  (DRA752_EFUSE_BASE + 0x05E8)
+/* STD_FUSE_OPP_VMIN_CORE_2 */
+#define STD_FUSE_OPP_VMIN_CORE_NOM     (DRA752_EFUSE_BASE + 0x05F4)
+/* STD_FUSE_OPP_VMIN_GPU_2 */
+#define STD_FUSE_OPP_VMIN_GPU_NOM      (DRA752_EFUSE_BASE + 0x1B08)
+/* STD_FUSE_OPP_VMIN_GPU_3 */
+#define STD_FUSE_OPP_VMIN_GPU_OD       (DRA752_EFUSE_BASE + 0x1B0C)
+/* STD_FUSE_OPP_VMIN_GPU_4 */
+#define STD_FUSE_OPP_VMIN_GPU_HIGH     (DRA752_EFUSE_BASE + 0x1B10)
+/* STD_FUSE_OPP_VMIN_MPU_2 */
+#define STD_FUSE_OPP_VMIN_MPU_NOM      (DRA752_EFUSE_BASE + 0x1B20)
+/* STD_FUSE_OPP_VMIN_MPU_3 */
+#define STD_FUSE_OPP_VMIN_MPU_OD       (DRA752_EFUSE_BASE + 0x1B24)
+/* STD_FUSE_OPP_VMIN_MPU_4 */
+#define STD_FUSE_OPP_VMIN_MPU_HIGH     (DRA752_EFUSE_BASE + 0x1B28)
+
 /* Standard offset is 0.5v expressed in uv */
 #define PALMAS_SMPS_BASE_VOLT_UV 500000
 
index 3b8bece699d631e99de30a3685625c81853437eb..f51fccce5911cff57aca6fa3e974309d8f8260d0 100644 (file)
@@ -506,9 +506,20 @@ struct pmic_data {
        int (*pmic_write)(u8 sa, u8 reg_addr, u8 reg_data);
 };
 
+/**
+ * struct volts_efuse_data - efuse definition for voltage
+ * @reg:       register address for efuse
+ * @reg_bits:  Number of bits in a register address, mandatory.
+ */
+struct volts_efuse_data {
+       u32 reg;
+       u8 reg_bits;
+};
+
 struct volts {
        u32 value;
        u32 addr;
+       struct volts_efuse_data efuse;
        struct pmic_data *pmic;
 };