configs: ls1088aqds: add COMMON_ENV to fix distroboot

Add COMMON_ENV(kernelheader_addr_r, fdtheader_addr_r,
kernel_addr_r, fdt_addr_r, load_addr)
to fix a bug that failed to boot to ubuntu
Failed log as follows,
	## Executing script at 80000000
	load - load binary file from a filesystemUsage:
	load <interface> [<dev[:part]> [<addr> [<filename> [bytes [pos]]]]]
	    - Load binary file filename from partition part on device
	       type interface instance dev to address addr in memory.
	      bytes gives the size to load in bytes.
	      If bytes is 0 or omitted, the file is read until the end.
	      pos gives the file byte position to start reading from.
	      If pos is 0 or omitted, the file is read from the start.
	...
	Bad Linux ARM64 Image magic!
	SCRIPT FAILED: continuing...

Signed-off-by: Biwen Li <biwen.li@nxp.com>
[Updated description]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>

diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h
index b92ec14c691732b773bf973afc7f37ee460d66c9..1626e65056b488a9b40c9077eb2c3636abeaaaf5 100644 (file)
--- a/include/configs/ls1088aqds.h
+++ b/include/configs/ls1088aqds.h
@@ -371,10 +371,18 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_ESDHC_DETECT_QUIRK ((readb(QIXIS_BASE + QIXIS_STAT_PRES1) & \
        QIXIS_SDID_MASK) != QIXIS_ESDHC_NO_ADAPTER)
 
+#define COMMON_ENV \
+       "kernelheader_addr_r=0x80200000\0"      \
+       "fdtheader_addr_r=0x80100000\0"         \
+       "kernel_addr_r=0x81000000\0"            \
+       "fdt_addr_r=0x90000000\0"               \
+       "load_addr=0xa0000000\0"
+
 /* Initial environment variables */
 #ifdef CONFIG_NXP_ESBC
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS              \
+       COMMON_ENV                              \
        "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
        "loadaddr=0x90100000\0"                 \
        "kernel_addr=0x100000\0"                \
@@ -406,6 +414,7 @@ unsigned long get_board_ddr_clk(void);
 
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS              \
+       COMMON_ENV                              \
        "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
        "loadaddr=0x90100000\0"                 \
        "kernel_addr=0x100000\0"                \
@@ -467,6 +476,7 @@ unsigned long get_board_ddr_clk(void);
 #if defined(CONFIG_QSPI_BOOT)
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS              \
+       COMMON_ENV                              \
        "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
        "loadaddr=0x90100000\0"                 \
        "kernel_addr=0x100000\0"                \
@@ -484,6 +494,7 @@ unsigned long get_board_ddr_clk(void);
 #elif defined(CONFIG_SD_BOOT)
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS               \
+       COMMON_ENV                              \
        "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
        "loadaddr=0x90100000\0"                 \
        "kernel_addr=0x800\0"                \
@@ -501,6 +512,7 @@ unsigned long get_board_ddr_clk(void);
 #else  /* NOR BOOT */
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS              \
+       COMMON_ENV                              \
        "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
        "loadaddr=0x90100000\0"                 \
        "kernel_addr=0x100000\0"                \