ARM: dts: stm32mp: alignment with v6.0-rc3

Device tree alignment with Linux kernel v6.0-rc3:
- ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp15xx-dkx
- ARM: dts: stm32: Add alternate pinmux for RCC pin
- ARM: dts: stm32: Add alternate pinmux for DCMI pins
- ARM: dts: stm32: Add alternate pinmux for SPI2 pins
- ARM: dts: stm32: Fix SPI2 pinmux pin comments on stm32mp15
- ARM: dts: stm32: add optee reserved memory on stm32mp135f-dk
- ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP13
- ARM: dts: stm32: remove the IPCC "wakeup" IRQ on stm32mp151

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

diff --git a/arch/arm/dts/stm32mp13-u-boot.dtsi b/arch/arm/dts/stm32mp13-u-boot.dtsi
index 01552adb7c4a7500bf407ab98a62f7a88f31bcb6..47a43649bbb068c85221e8ea73223709c07f6588 100644 (file)
--- a/arch/arm/dts/stm32mp13-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp13-u-boot.dtsi
@@ -17,6 +17,12 @@
                pinctrl0 = &pinctrl;
        };
 
+       firmware {
+               optee {
+                       u-boot,dm-pre-reloc;
+               };
+       };
+
        /* need PSCI for sysreset during board_f */
        psci {
                u-boot,dm-pre-proper;
@@ -82,10 +88,6 @@
        u-boot,dm-pre-reloc;
 };
 
-&optee {
-       u-boot,dm-pre-reloc;
-};
-
 &pinctrl {
        u-boot,dm-pre-reloc;
 };

diff --git a/arch/arm/dts/stm32mp131.dtsi b/arch/arm/dts/stm32mp131.dtsi
index 84e16bb2f2bf6bd2653a5cb335c3d357e152837f..a1c6d0d00b5265700f407a3f8c05ddea39e10029 100644 (file)
--- a/arch/arm/dts/stm32mp131.dtsi
+++ b/arch/arm/dts/stm32mp131.dtsi
@@ -27,21 +27,8 @@
                interrupt-parent = <&intc>;
        };
 
-       scmi_sram: sram@2ffff000 {
-               compatible = "mmio-sram";
-               reg = <0x2ffff000 0x1000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-               ranges = <0 0x2ffff000 0x1000>;
-
-               scmi_shm: scmi_shm@0 {
-                       compatible = "arm,scmi-shmem";
-                       reg = <0 0x80>;
-               };
-       };
-
        firmware {
-               optee: optee {
+               optee {
                        method = "smc";
                        compatible = "linaro,optee-tz";
                };
@@ -151,6 +138,19 @@
                interrupt-parent = <&intc>;
                ranges;
 
+               scmi_sram: sram@2ffff000 {
+                       compatible = "mmio-sram";
+                       reg = <0x2ffff000 0x1000>;
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges = <0 0x2ffff000 0x1000>;
+
+                       scmi_shm: scmi-sram@0 {
+                               compatible = "arm,scmi-shmem";
+                               reg = <0 0x80>;
+                       };
+               };
+
                uart4: serial@40010000 {
                        compatible = "st,stm32h7-uart";
                        reg = <0x40010000 0x400>;

diff --git a/arch/arm/dts/stm32mp135f-dk.dts b/arch/arm/dts/stm32mp135f-dk.dts
index f436ffab9983837c9923e6315845e0c452f0550e..e6b8ffd332c7e2dba8fb53e98bac1994cc61e896 100644 (file)
--- a/arch/arm/dts/stm32mp135f-dk.dts
+++ b/arch/arm/dts/stm32mp135f-dk.dts
@@ -31,8 +31,8 @@
                #size-cells = <1>;
                ranges;
 
-               optee@de000000 {
-                       reg = <0xde000000 0x2000000>;
+               optee@dd000000 {
+                       reg = <0xdd000000 0x3000000>;
                        no-map;
                };
        };

diff --git a/arch/arm/dts/stm32mp15-pinctrl.dtsi b/arch/arm/dts/stm32mp15-pinctrl.dtsi
index d3ed10335dfdff41ff4793cf4e5760a82609b235..2cc9341d43d29511ecbb55722e9dacc10624409e 100644 (file)
--- a/arch/arm/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/dts/stm32mp15-pinctrl.dtsi
@@ -151,6 +151,43 @@
                };
        };
 
+       dcmi_pins_c: dcmi-2 {
+               pins {
+                       pinmux = <STM32_PINMUX('A', 4,  AF13)>,/* DCMI_HSYNC */
+                                <STM32_PINMUX('B', 7,  AF13)>,/* DCMI_VSYNC */
+                                <STM32_PINMUX('A', 6,  AF13)>,/* DCMI_PIXCLK */
+                                <STM32_PINMUX('A', 9,  AF13)>,/* DCMI_D0 */
+                                <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */
+                                <STM32_PINMUX('E', 0, AF13)>,/* DCMI_D2 */
+                                <STM32_PINMUX('E', 1, AF13)>,/* DCMI_D3 */
+                                <STM32_PINMUX('H', 14, AF13)>,/* DCMI_D4 */
+                                <STM32_PINMUX('I', 4,  AF13)>,/* DCMI_D5 */
+                                <STM32_PINMUX('I', 6,  AF13)>,/* DCMI_D6 */
+                                <STM32_PINMUX('E', 6,  AF13)>,/* DCMI_D7 */
+                                <STM32_PINMUX('I', 1,  AF13)>,/* DCMI_D8 */
+                                <STM32_PINMUX('H', 7,  AF13)>;/* DCMI_D9 */
+                       bias-pull-up;
+               };
+       };
+
+       dcmi_sleep_pins_c: dcmi-sleep-2 {
+               pins {
+                       pinmux = <STM32_PINMUX('A', 4,  ANALOG)>,/* DCMI_HSYNC */
+                                <STM32_PINMUX('B', 7,  ANALOG)>,/* DCMI_VSYNC */
+                                <STM32_PINMUX('A', 6,  ANALOG)>,/* DCMI_PIXCLK */
+                                <STM32_PINMUX('A', 9,  ANALOG)>,/* DCMI_D0 */
+                                <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */
+                                <STM32_PINMUX('E', 0, ANALOG)>,/* DCMI_D2 */
+                                <STM32_PINMUX('E', 1, ANALOG)>,/* DCMI_D3 */
+                                <STM32_PINMUX('H', 14, ANALOG)>,/* DCMI_D4 */
+                                <STM32_PINMUX('I', 4,  ANALOG)>,/* DCMI_D5 */
+                                <STM32_PINMUX('I', 6,  ANALOG)>,/* DCMI_D6 */
+                                <STM32_PINMUX('E', 6,  ANALOG)>,/* DCMI_D7 */
+                                <STM32_PINMUX('I', 1,  ANALOG)>,/* DCMI_D8 */
+                                <STM32_PINMUX('H', 7,  ANALOG)>;/* DCMI_D9 */
+               };
+       };
+
        ethernet0_rgmii_pins_a: rgmii-0 {
                pins1 {
                        pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
@@ -923,6 +960,21 @@
                };
        };
 
+       mco1_pins_a: mco1-0 {
+               pins {
+                       pinmux = <STM32_PINMUX('A', 13, AF2)>; /* MCO1 */
+                       bias-disable;
+                       drive-push-pull;
+                       slew-rate = <1>;
+               };
+       };
+
+       mco1_sleep_pins_a: mco1-sleep-0 {
+               pins {
+                       pinmux = <STM32_PINMUX('A', 13, ANALOG)>; /* MCO1 */
+               };
+       };
+
        mco2_pins_a: mco2-0 {
                pins {
                        pinmux = <STM32_PINMUX('G', 2, AF1)>; /* MCO2 */
@@ -1814,30 +1866,30 @@
 
        spi2_pins_a: spi2-0 {
                pins1 {
-                       pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI1_SCK */
-                                <STM32_PINMUX('I', 3, AF5)>; /* SPI1_MOSI */
+                       pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI2_SCK */
+                                <STM32_PINMUX('I', 3, AF5)>; /* SPI2_MOSI */
                        bias-disable;
                        drive-push-pull;
                        slew-rate = <1>;
                };
 
                pins2 {
-                       pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI1_MISO */
+                       pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI2_MISO */
                        bias-disable;
                };
        };
 
        spi2_pins_b: spi2-1 {
                pins1 {
-                       pinmux = <STM32_PINMUX('I', 1, AF5)>, /* SPI1_SCK */
-                                <STM32_PINMUX('I', 3, AF5)>; /* SPI1_MOSI */
+                       pinmux = <STM32_PINMUX('I', 1, AF5)>, /* SPI2_SCK */
+                                <STM32_PINMUX('I', 3, AF5)>; /* SPI2_MOSI */
                        bias-disable;
                        drive-push-pull;
                        slew-rate = <1>;
                };
 
                pins2 {
-                       pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI1_MISO */
+                       pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI2_MISO */
                        bias-disable;
                };
        };

diff --git a/arch/arm/dts/stm32mp151.dtsi b/arch/arm/dts/stm32mp151.dtsi
index 767a06ef684308d59cbaef23f82384906349cdca..f0fb022fc63eb1e96930a5ce475b1dbfe7a9797a 100644 (file)
--- a/arch/arm/dts/stm32mp151.dtsi
+++ b/arch/arm/dts/stm32mp151.dtsi
@@ -1143,10 +1143,9 @@
                        reg = <0x4c001000 0x400>;
                        st,proc-id = <0>;
                        interrupts-extended =
-                               <&intc GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
-                               <&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
-                               <&exti 61 1>;
-                       interrupt-names = "rx", "tx", "wakeup";
+                               <&exti 61 1>,
+                               <&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "rx", "tx";
                        clocks = <&rcc IPCC>;
                        wakeup-source;
                        status = "disabled";

diff --git a/arch/arm/dts/stm32mp15xx-dkx.dtsi b/arch/arm/dts/stm32mp15xx-dkx.dtsi
index 3d36cac9ed00c43a0e4db48bc3d3a0e6202c55b8..5a045d7156bec5046acf9b4375d95f7d43a06ec9 100644 (file)
--- a/arch/arm/dts/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dkx.dtsi
@@ -685,6 +685,14 @@
 &usbh_ehci {
        phys = <&usbphyc_port0>;
        status = "okay";
+       #address-cells = <1>;
+       #size-cells = <0>;
+       /* onboard HUB */
+       hub@1 {
+               compatible = "usb424,2514";
+               reg = <1>;
+               vdd-supply = <&v3v3>;
+       };
 };
 
 &usbotg_hs {