configs: evb-ast2[56]00: Enable GPIO control

Build in the driver for the Aspeed GPIO controller and turn on the
`gpio` shell command.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>

diff --git a/configs/evb-ast2500_defconfig b/configs/evb-ast2500_defconfig
index 03c5cc612d6ce4e0f30ce83208e180f573ef6cdb..53fe7776e90692f53b54cd3d976ab26c96083f49 100644 (file)
--- a/configs/evb-ast2500_defconfig
+++ b/configs/evb-ast2500_defconfig
@@ -7,6 +7,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_TARGET_EVB_AST2500=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_ENV_SIZE=0x20000
+CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="ast2500-evb"
 CONFIG_PRE_CON_BUF_ADDR=0x1e720000
 CONFIG_SYS_LOAD_ADDR=0x83000000
@@ -18,6 +19,7 @@ CONFIG_PRE_CONSOLE_BUFFER=y
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_HUSH_PARSER=y
 # CONFIG_AUTO_COMPLETE is not set
+CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_DHCP=y
@@ -29,6 +31,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_REGMAP=y
 CONFIG_CLK=y
+CONFIG_ASPEED_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_ASPEED=y
 CONFIG_MMC_SDHCI=y

diff --git a/configs/evb-ast2600_defconfig b/configs/evb-ast2600_defconfig
index 17d6dcb9f23a520e4b2c62968be0d161f59bd051..f541c69b3b4ad57fb6136629ff02a82c53c47f3a 100644 (file)
--- a/configs/evb-ast2600_defconfig
+++ b/configs/evb-ast2600_defconfig
@@ -11,6 +11,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_ENV_SIZE=0x10000
+CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="ast2600-evb"
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_STACK_R_ADDR=0x83000000
@@ -39,6 +40,7 @@ CONFIG_SPL_DM_RESET=y
 CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_HUSH_PARSER=y
+CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_DHCP=y
@@ -58,6 +60,7 @@ CONFIG_SPL_CLK=y
 CONFIG_DM_HASH=y
 CONFIG_HASH_ASPEED=y
 CONFIG_ASPEED_ACRY=y
+CONFIG_ASPEED_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_MISC=y
 CONFIG_SPL_MISC=y