spi: fsl_qspi: Copy 16 byte aligned data in TX FIFO

In some of the QSPI controller version, there must be atleast
128bit data available in TX FIFO for any pop operation otherwise
error bit will be set. The code will not make any behavior change
for previous controller as the transfer data size in ipcr register
is still the same.

Patch is tested on LS1046A which do not require 16 bytes aligned and
LS1088A which require 16 bytes aligned data in TX FIFO

Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com>
Signed-off-by: Anupam Kumar <anupam.kumar_1@nxp.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>

diff --git a/drivers/spi/fsl_qspi.c b/drivers/spi/fsl_qspi.c
index 8753ed99f1bba19327c3b5a8c059a9a97f6d60fa..0f3f7d97f0137fa7b258358119f8a0459d313a33 100644 (file)
--- a/drivers/spi/fsl_qspi.c
+++ b/drivers/spi/fsl_qspi.c
@@ -664,22 +664,20 @@ static void qspi_op_write(struct fsl_qspi_priv *priv, u8 *txbuf, u32 len)
        tx_size = (len > TX_BUFFER_SIZE) ?
                TX_BUFFER_SIZE : len;
 
-       size = tx_size / 4;
-       for (i = 0; i < size; i++) {
+       size = tx_size / 16;
+       /*
+        * There must be atleast 128bit data
+        * available in TX FIFO for any pop operation
+        */
+       if (tx_size % 16)
+               size++;
+       for (i = 0; i < size * 4; i++) {
                memcpy(&data, txbuf, 4);
                data = qspi_endian_xchg(data);
                qspi_write32(priv->flags, &regs->tbdr, data);
                txbuf += 4;
        }
 
-       size = tx_size % 4;
-       if (size) {
-               data = 0;
-               memcpy(&data, txbuf, size);
-               data = qspi_endian_xchg(data);
-               qspi_write32(priv->flags, &regs->tbdr, data);
-       }
-
        qspi_write32(priv->flags, &regs->ipcr,
                     (seqid << QSPI_IPCR_SEQID_SHIFT) | tx_size);
        while (qspi_read32(priv->flags, &regs->sr) & QSPI_SR_BUSY_MASK)