This is not used anymore. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
obj-$(CONFIG_EP93XX) += ep93xx/
obj-$(CONFIG_IMX) += imx/
-obj-$(CONFIG_S3C24X0) += s3c24x0/
# some files can only build in ARM mode
+++ /dev/null
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-$(CONFIG_DISPLAY_CPUINFO) += cpu_info.o
-obj-y += speed.o
-obj-y += timer.o
+++ /dev/null
-/*
- * (C) Copyright 2010
- * David Mueller <d.mueller@elsoft.ch>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/s3c24x0_cpu.h>
-
-typedef ulong (*getfreq)(void);
-
-static const getfreq freq_f[] = {
- get_FCLK,
- get_HCLK,
- get_PCLK,
-};
-
-static const char freq_c[] = { 'F', 'H', 'P' };
-
-int print_cpuinfo(void)
-{
- int i;
- char buf[32];
-/* the S3C2400 seems to be lacking a CHIP ID register */
-#ifndef CONFIG_S3C2400
- ulong cpuid;
- struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
-
- cpuid = readl(&gpio->gstatus1);
- printf("CPUID: %8lX\n", cpuid);
-#endif
- for (i = 0; i < ARRAY_SIZE(freq_f); i++)
- printf("%cCLK: %8s MHz\n", freq_c[i], strmhz(buf, freq_f[i]()));
-
- return 0;
-}
+++ /dev/null
-/*
- * (C) Copyright 2001-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, d.mueller@elsoft.ch
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/* This code should work for both the S3C2400 and the S3C2410
- * as they seem to have the same PLL and clock machinery inside.
- * The different address mapping is handled by the s3c24xx.h files below.
- */
-
-#include <common.h>
-#ifdef CONFIG_S3C24X0
-
-#include <asm/io.h>
-#include <asm/arch/s3c24x0_cpu.h>
-
-#define MPLL 0
-#define UPLL 1
-
-/* ------------------------------------------------------------------------- */
-/* NOTE: This describes the proper use of this file.
- *
- * CONFIG_SYS_CLK_FREQ should be defined as the input frequency of the PLL.
- *
- * get_FCLK(), get_HCLK(), get_PCLK() and get_UCLK() return the clock of
- * the specified bus in HZ.
- */
-/* ------------------------------------------------------------------------- */
-
-static ulong get_PLLCLK(int pllreg)
-{
- struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
- ulong r, m, p, s;
-
- if (pllreg == MPLL)
- r = readl(&clk_power->mpllcon);
- else if (pllreg == UPLL)
- r = readl(&clk_power->upllcon);
- else
- hang();
-
- m = ((r & 0xFF000) >> 12) + 8;
- p = ((r & 0x003F0) >> 4) + 2;
- s = r & 0x3;
-
-#if defined(CONFIG_S3C2440)
- if (pllreg == MPLL)
- return 2 * m * (CONFIG_SYS_CLK_FREQ / (p << s));
-#endif
- return (CONFIG_SYS_CLK_FREQ * m) / (p << s);
-
-}
-
-/* return FCLK frequency */
-ulong get_FCLK(void)
-{
- return get_PLLCLK(MPLL);
-}
-
-/* return HCLK frequency */
-ulong get_HCLK(void)
-{
- struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
-#ifdef CONFIG_S3C2440
- switch (readl(&clk_power->clkdivn) & 0x6) {
- default:
- case 0:
- return get_FCLK();
- case 2:
- return get_FCLK() / 2;
- case 4:
- return (readl(&clk_power->camdivn) & (1 << 9)) ?
- get_FCLK() / 8 : get_FCLK() / 4;
- case 6:
- return (readl(&clk_power->camdivn) & (1 << 8)) ?
- get_FCLK() / 6 : get_FCLK() / 3;
- }
-#else
- return (readl(&clk_power->clkdivn) & 2) ? get_FCLK() / 2 : get_FCLK();
-#endif
-}
-
-/* return PCLK frequency */
-ulong get_PCLK(void)
-{
- struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
-
- return (readl(&clk_power->clkdivn) & 1) ? get_HCLK() / 2 : get_HCLK();
-}
-
-/* return UCLK frequency */
-ulong get_UCLK(void)
-{
- return get_PLLCLK(UPLL);
-}
-
-#endif /* CONFIG_S3C24X0 */
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#ifdef CONFIG_S3C24X0
-
-#include <asm/io.h>
-#include <asm/arch/s3c24x0_cpu.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int timer_init(void)
-{
- struct s3c24x0_timers *timers = s3c24x0_get_base_timers();
- ulong tmr;
-
- /* use PWM Timer 4 because it has no output */
- /* prescaler for Timer 4 is 16 */
- writel(0x0f00, &timers->tcfg0);
- if (gd->arch.tbu == 0) {
- /*
- * for 10 ms clock period @ PCLK with 4 bit divider = 1/2
- * (default) and prescaler = 16. Should be 10390
- * @33.25MHz and 15625 @ 50 MHz
- */
- gd->arch.tbu = get_PCLK() / (2 * 16 * 100);
- gd->arch.timer_rate_hz = get_PCLK() / (2 * 16);
- }
- /* load value for 10 ms timeout */
- writel(gd->arch.tbu, &timers->tcntb4);
- /* auto load, manual update of timer 4 */
- tmr = (readl(&timers->tcon) & ~0x0700000) | 0x0600000;
- writel(tmr, &timers->tcon);
- /* auto load, start timer 4 */
- tmr = (tmr & ~0x0700000) | 0x0500000;
- writel(tmr, &timers->tcon);
- gd->arch.lastinc = 0;
- gd->arch.tbl = 0;
-
- return 0;
-}
-
-/*
- * timer without interrupts
- */
-ulong get_timer(ulong base)
-{
- return get_timer_masked() - base;
-}
-
-void __udelay (unsigned long usec)
-{
- ulong tmo;
- ulong start = get_ticks();
-
- tmo = usec / 1000;
- tmo *= (gd->arch.tbu * 100);
- tmo /= 1000;
-
- while ((ulong) (get_ticks() - start) < tmo)
- /*NOP*/;
-}
-
-ulong get_timer_masked(void)
-{
- ulong tmr = get_ticks();
-
- return tmr / (gd->arch.timer_rate_hz / CONFIG_SYS_HZ);
-}
-
-void udelay_masked(unsigned long usec)
-{
- ulong tmo;
- ulong endtime;
- signed long diff;
-
- if (usec >= 1000) {
- tmo = usec / 1000;
- tmo *= (gd->arch.tbu * 100);
- tmo /= 1000;
- } else {
- tmo = usec * (gd->arch.tbu * 100);
- tmo /= (1000 * 1000);
- }
-
- endtime = get_ticks() + tmo;
-
- do {
- ulong now = get_ticks();
- diff = endtime - now;
- } while (diff >= 0);
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
- struct s3c24x0_timers *timers = s3c24x0_get_base_timers();
- ulong now = readl(&timers->tcnto4) & 0xffff;
-
- if (gd->arch.lastinc >= now) {
- /* normal mode */
- gd->arch.tbl += gd->arch.lastinc - now;
- } else {
- /* we have an overflow ... */
- gd->arch.tbl += gd->arch.lastinc + gd->arch.tbu - now;
- }
- gd->arch.lastinc = now;
-
- return gd->arch.tbl;
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk(void)
-{
- return CONFIG_SYS_HZ;
-}
-
-/*
- * reset the cpu by setting up the watchdog timer and let him time out
- */
-void reset_cpu(ulong ignored)
-{
- struct s3c24x0_watchdog *watchdog;
-
- watchdog = s3c24x0_get_base_watchdog();
-
- /* Disable watchdog */
- writel(0x0000, &watchdog->wtcon);
-
- /* Initialize watchdog timer count register */
- writel(0x0001, &watchdog->wtcnt);
-
- /* Enable watchdog timer; assert reset at timer timeout */
- writel(0x0021, &watchdog->wtcon);
-
- while (1)
- /* loop forever and wait for reset to happen */;
-
- /*NOTREACHED*/
-}
-
-#endif /* CONFIG_S3C24X0 */
+++ /dev/null
-/*
- * Copyright (c) 2012.
- *
- * Gabriel Huau <contact@huau-gabriel.fr>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _S3C24X0_GPIO_H_
-#define _S3C24X0_GPIO_H_
-
-enum s3c2440_gpio {
- GPA0,
- GPA1,
- GPA2,
- GPA3,
- GPA4,
- GPA5,
- GPA6,
- GPA7,
- GPA8,
- GPA9,
- GPA10,
- GPA11,
- GPA12,
- GPA13,
- GPA14,
- GPA15,
- GPA16,
- GPA17,
- GPA18,
- GPA19,
- GPA20,
- GPA21,
- GPA22,
- GPA23,
- GPA24,
-
- GPB0 = 32,
- GPB1,
- GPB2,
- GPB3,
- GPB4,
- GPB5,
- GPB6,
- GPB7,
- GPB8,
- GPB9,
- GPB10,
-
- GPC0 = 64,
- GPC1,
- GPC2,
- GPC3,
- GPC4,
- GPC5,
- GPC6,
- GPC7,
- GPC8,
- GPC9,
- GPC10,
- GPC11,
- GPC12,
- GPC13,
- GPC14,
- GPC15,
-
- GPD0 = 96,
- GPD1,
- GPD2,
- GPD3,
- GPD4,
- GPD5,
- GPD6,
- GPD7,
- GPD8,
- GPD9,
- GPD10,
- GPD11,
- GPD12,
- GPD13,
- GPD14,
- GPD15,
-
- GPE0 = 128,
- GPE1,
- GPE2,
- GPE3,
- GPE4,
- GPE5,
- GPE6,
- GPE7,
- GPE8,
- GPE9,
- GPE10,
- GPE11,
- GPE12,
- GPE13,
- GPE14,
- GPE15,
-
- GPF0 = 160,
- GPF1,
- GPF2,
- GPF3,
- GPF4,
- GPF5,
- GPF6,
- GPF7,
-
- GPG0 = 192,
- GPG1,
- GPG2,
- GPG3,
- GPG4,
- GPG5,
- GPG6,
- GPG7,
- GPG8,
- GPG9,
- GPG10,
- GPG11,
- GPG12,
- GPG13,
- GPG14,
- GPG15,
-
- GPH0 = 224,
- GPH1,
- GPH2,
- GPH3,
- GPH4,
- GPH5,
- GPH6,
- GPH7,
- GPH8,
- GPH9,
- GPH10,
-
- GPJ0 = 256,
- GPJ1,
- GPJ2,
- GPJ3,
- GPJ4,
- GPJ5,
- GPJ6,
- GPJ7,
- GPJ8,
- GPJ9,
- GPJ10,
- GPJ11,
- GPJ12,
-};
-
-#endif
+++ /dev/null
-/*
- * Copyright (c) 2012
- *
- * Gabriel Huau <contact@huau-gabriel.fr>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _S3C24X0_IOMUX_H_
-#define _S3C24X0_IOMUX_H_
-
-enum s3c2440_iomux_func {
- /* PORT A */
- IOMUXA_ADDR0 = 1,
- IOMUXA_ADDR16 = (1 << 1),
- IOMUXA_ADDR17 = (1 << 2),
- IOMUXA_ADDR18 = (1 << 3),
- IOMUXA_ADDR19 = (1 << 4),
- IOMUXA_ADDR20 = (1 << 5),
- IOMUXA_ADDR21 = (1 << 6),
- IOMUXA_ADDR22 = (1 << 7),
- IOMUXA_ADDR23 = (1 << 8),
- IOMUXA_ADDR24 = (1 << 9),
- IOMUXA_ADDR25 = (1 << 10),
- IOMUXA_ADDR26 = (1 << 11),
- IOMUXA_nGCS1 = (1 << 12),
- IOMUXA_nGCS2 = (1 << 13),
- IOMUXA_nGCS3 = (1 << 14),
- IOMUXA_nGCS4 = (1 << 15),
- IOMUXA_nGCS5 = (1 << 16),
- IOMUXA_CLE = (1 << 17),
- IOMUXA_ALE = (1 << 18),
- IOMUXA_nFWE = (1 << 19),
- IOMUXA_nFRE = (1 << 20),
- IOMUXA_nRSTOUT = (1 << 21),
- IOMUXA_nFCE = (1 << 22),
-
- /* PORT B */
- IOMUXB_nXDREQ0 = (2 << 20),
- IOMUXB_nXDACK0 = (2 << 18),
- IOMUXB_nXDREQ1 = (2 << 16),
- IOMUXB_nXDACK1 = (2 << 14),
- IOMUXB_nXBREQ = (2 << 12),
- IOMUXB_nXBACK = (2 << 10),
- IOMUXB_TCLK0 = (2 << 8),
- IOMUXB_TOUT3 = (2 << 6),
- IOMUXB_TOUT2 = (2 << 4),
- IOMUXB_TOUT1 = (2 << 2),
- IOMUXB_TOUT0 = 2,
-
- /* PORT C */
- IOMUXC_VS7 = (2 << 30),
- IOMUXC_VS6 = (2 << 28),
- IOMUXC_VS5 = (2 << 26),
- IOMUXC_VS4 = (2 << 24),
- IOMUXC_VS3 = (2 << 22),
- IOMUXC_VS2 = (2 << 20),
- IOMUXC_VS1 = (2 << 18),
- IOMUXC_VS0 = (2 << 16),
- IOMUXC_LCD_LPCREVB = (2 << 14),
- IOMUXC_LCD_LPCREV = (2 << 12),
- IOMUXC_LCD_LPCOE = (2 << 10),
- IOMUXC_VM = (2 << 8),
- IOMUXC_VFRAME = (2 << 6),
- IOMUXC_VLINE = (2 << 4),
- IOMUXC_VCLK = (2 << 2),
- IOMUXC_LEND = 2,
- IOMUXC_I2SSDI = (3 << 8),
-
- /* PORT D */
- IOMUXD_VS23 = (2 << 30),
- IOMUXD_VS22 = (2 << 28),
- IOMUXD_VS21 = (2 << 26),
- IOMUXD_VS20 = (2 << 24),
- IOMUXD_VS19 = (2 << 22),
- IOMUXD_VS18 = (2 << 20),
- IOMUXD_VS17 = (2 << 18),
- IOMUXD_VS16 = (2 << 16),
- IOMUXD_VS15 = (2 << 14),
- IOMUXD_VS14 = (2 << 12),
- IOMUXD_VS13 = (2 << 10),
- IOMUXD_VS12 = (2 << 8),
- IOMUXD_VS11 = (2 << 6),
- IOMUXD_VS10 = (2 << 4),
- IOMUXD_VS9 = (2 << 2),
- IOMUXD_VS8 = 2,
- IOMUXD_nSS0 = (3 << 30),
- IOMUXD_nSS1 = (3 << 28),
- IOMUXD_SPICLK1 = (3 << 20),
- IOMUXD_SPIMOSI1 = (3 << 18),
- IOMUXD_SPIMISO1 = (3 << 16),
-
- /* PORT E */
- IOMUXE_IICSDA = (2 << 30),
- IOMUXE_IICSCL = (2 << 28),
- IOMUXE_SPICLK0 = (2 << 26),
- IOMUXE_SPIMOSI0 = (2 << 24),
- IOMUXE_SPIMISO0 = (2 << 22),
- IOMUXE_SDDAT3 = (2 << 20),
- IOMUXE_SDDAT2 = (2 << 18),
- IOMUXE_SDDAT1 = (2 << 16),
- IOMUXE_SDDAT0 = (2 << 14),
- IOMUXE_SDCMD = (2 << 12),
- IOMUXE_SDCLK = (2 << 10),
- IOMUXE_I2SDO = (2 << 8),
- IOMUXE_I2SDI = (2 << 6),
- IOMUXE_CDCLK = (2 << 4),
- IOMUXE_I2SSCLK = (2 << 2),
- IOMUXE_I2SLRCK = 2,
- IOMUXE_AC_SDATA_OUT = (3 << 8),
- IOMUXE_AC_SDATA_IN = (3 << 6),
- IOMUXE_AC_nRESET = (3 << 4),
- IOMUXE_AC_BIT_CLK = (3 << 2),
- IOMUXE_AC_SYNC = 3,
-
- /* PORT F */
- IOMUXF_EINT7 = (2 << 14),
- IOMUXF_EINT6 = (2 << 12),
- IOMUXF_EINT5 = (2 << 10),
- IOMUXF_EINT4 = (2 << 8),
- IOMUXF_EINT3 = (2 << 6),
- IOMUXF_EINT2 = (2 << 4),
- IOMUXF_EINT1 = (2 << 2),
- IOMUXF_EINT0 = 2,
-
- /* PORT G */
- IOMUXG_EINT23 = (2 << 30),
- IOMUXG_EINT22 = (2 << 28),
- IOMUXG_EINT21 = (2 << 26),
- IOMUXG_EINT20 = (2 << 24),
- IOMUXG_EINT19 = (2 << 22),
- IOMUXG_EINT18 = (2 << 20),
- IOMUXG_EINT17 = (2 << 18),
- IOMUXG_EINT16 = (2 << 16),
- IOMUXG_EINT15 = (2 << 14),
- IOMUXG_EINT14 = (2 << 12),
- IOMUXG_EINT13 = (2 << 10),
- IOMUXG_EINT12 = (2 << 8),
- IOMUXG_EINT11 = (2 << 6),
- IOMUXG_EINT10 = (2 << 4),
- IOMUXG_EINT9 = (2 << 2),
- IOMUXG_EINT8 = 2,
- IOMUXG_TCLK1 = (3 << 22),
- IOMUXG_nCTS1 = (3 << 20),
- IOMUXG_nRTS1 = (3 << 18),
- IOMUXG_SPICLK1 = (3 << 14),
- IOMUXG_SPIMOSI1 = (3 << 12),
- IOMUXG_SPIMISO1 = (3 << 10),
- IOMUXG_LCD_PWRDN = (3 << 8),
- IOMUXG_nSS1 = (3 << 6),
- IOMUXG_nSS0 = (3 << 4),
-
- /* PORT H */
- IOMUXH_CLKOUT1 = (2 << 20),
- IOMUXH_CLKOUT0 = (2 << 18),
- IOMUXH_UEXTCLK = (2 << 16),
- IOMUXH_RXD2 = (2 << 14),
- IOMUXH_TXD2 = (2 << 12),
- IOMUXH_RXD1 = (2 << 10),
- IOMUXH_TXD1 = (2 << 8),
- IOMUXH_RXD0 = (2 << 6),
- IOMUXH_TXD0 = (2 << 4),
- IOMUXH_nRTS0 = (2 << 2),
- IOMUXH_nCTS0 = 2,
- IOMUXH_nCTS1 = (3 << 14),
- IOMUXH_nRTS1 = (3 << 12),
-
- /* PORT J */
- IOMUXJ_CAMRESET = (2 << 24),
- IOMUXJ_CAMCLKOUT = (2 << 22),
- IOMUXJ_CAMHREF = (2 << 20),
- IOMUXJ_CAMVSYNC = (2 << 18),
- IOMUXJ_CAMPCLK = (2 << 16),
- IOMUXJ_CAMDATA7 = (2 << 14),
- IOMUXJ_CAMDATA6 = (2 << 12),
- IOMUXJ_CAMDATA5 = (2 << 10),
- IOMUXJ_CAMDATA4 = (2 << 8),
- IOMUXJ_CAMDATA3 = (2 << 6),
- IOMUXJ_CAMDATA2 = (2 << 4),
- IOMUXJ_CAMDATA1 = (2 << 2),
- IOMUXJ_CAMDATA0 = 2
-};
-
-#endif
+++ /dev/null
-/*
- * linux/include/asm-arm/arch-s3c2400/memory.h by garyj@denx.de
- * based on
- * linux/include/asm-arm/arch-sa1100/memory.h
- *
- * Copyright (c) 1999 Nicolas Pitre <nico@visuaide.com>
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-
-/*
- * Task size: 3GB
- */
-#define TASK_SIZE (0xc0000000UL)
-#define TASK_SIZE_26 (0x04000000UL)
-
-/*
- * This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#define TASK_UNMAPPED_BASE (TASK_SIZE / 3)
-
-/*
- * Page offset: 3GB
- */
-#define PAGE_OFFSET (0xc0000000UL)
-
-/*
- * Physical DRAM offset is 0x0c000000 on the S3C2400
- */
-#define PHYS_OFFSET (0x0c000000UL)
-
-/* Modified for S3C2400, by chc, 20010509 */
-#define RAM_IN_BANK_0 32*1024*1024
-#define RAM_IN_BANK_1 0
-#define RAM_IN_BANK_2 0
-#define RAM_IN_BANK_3 0
-
-#define MEM_SIZE (RAM_IN_BANK_0+RAM_IN_BANK_1+RAM_IN_BANK_2+RAM_IN_BANK_3)
-
-
-/* translation macros */
-#define __virt_to_phys__is_a_macro
-#define __phys_to_virt__is_a_macro
-
-#if (RAM_IN_BANK_1 + RAM_IN_BANK_2 + RAM_IN_BANK_3 == 0)
-
-#define __virt_to_phys(x) ( (x) - PAGE_OFFSET + 0x0c000000 )
-#define __phys_to_virt(x) ( (x) - 0x0c000000 + PAGE_OFFSET )
-
-#elif (RAM_IN_BANK_0 == RAM_IN_BANK_1) && \
- (RAM_IN_BANK_2 + RAM_IN_BANK_3 == 0)
-
-/* Two identical banks */
-#define __virt_to_phys(x) \
- ( ((x) < PAGE_OFFSET+RAM_IN_BANK_0) ? \
- ((x) - PAGE_OFFSET + _DRAMBnk0) : \
- ((x) - PAGE_OFFSET - RAM_IN_BANK_0 + _DRAMBnk1) )
-#define __phys_to_virt(x) \
- ( ((x)&0x07ffffff) + \
- (((x)&0x08000000) ? PAGE_OFFSET+RAM_IN_BANK_0 : PAGE_OFFSET) )
-#else
-
-/* It's more efficient for all other cases to use the function call */
-#undef __virt_to_phys__is_a_macro
-#undef __phys_to_virt__is_a_macro
-extern unsigned long __virt_to_phys(unsigned long vpage);
-extern unsigned long __phys_to_virt(unsigned long ppage);
-
-#endif
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- *
- * On the SA1100, bus addresses are equivalent to physical addresses.
- */
-#define __virt_to_bus__is_a_macro
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt__is_a_macro
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-
-#ifdef CONFIG_DISCONTIGMEM
-#error "CONFIG_DISCONTIGMEM will not work on S3C2400"
-/*
- * Because of the wide memory address space between physical RAM banks on the
- * SA1100, it's much more convenient to use Linux's NUMA support to implement
- * our memory map representation. Assuming all memory nodes have equal access
- * characteristics, we then have generic discontiguous memory support.
- *
- * Of course, all this isn't mandatory for SA1100 implementations with only
- * one used memory bank. For those, simply undefine CONFIG_DISCONTIGMEM.
- *
- * The nodes are matched with the physical memory bank addresses which are
- * incidentally the same as virtual addresses.
- *
- * node 0: 0xc0000000 - 0xc7ffffff
- * node 1: 0xc8000000 - 0xcfffffff
- * node 2: 0xd0000000 - 0xd7ffffff
- * node 3: 0xd8000000 - 0xdfffffff
- */
-
-#define NR_NODES 4
-
-/*
- * Given a kernel address, find the home node of the underlying memory.
- */
-#define KVADDR_TO_NID(addr) \
- (((unsigned long)(addr) - 0xc0000000) >> 27)
-
-/*
- * Given a physical address, convert it to a node id.
- */
-#define PHYS_TO_NID(addr) KVADDR_TO_NID(__phys_to_virt(addr))
-
-/*
- * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory
- * and returns the mem_map of that node.
- */
-#define ADDR_TO_MAPBASE(kaddr) \
- NODE_MEM_MAP(KVADDR_TO_NID((unsigned long)(kaddr)))
-
-/*
- * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory
- * and returns the index corresponding to the appropriate page in the
- * node's mem_map.
- */
-#define LOCAL_MAP_NR(kvaddr) \
- (((unsigned long)(kvaddr) & 0x07ffffff) >> PAGE_SHIFT)
-
-/*
- * Given a kaddr, virt_to_page returns a pointer to the corresponding
- * mem_map entry.
- */
-#define virt_to_page(kaddr) \
- (ADDR_TO_MAPBASE(kaddr) + LOCAL_MAP_NR(kaddr))
-
-/*
- * VALID_PAGE returns a non-zero value if given page pointer is valid.
- * This assumes all node's mem_maps are stored within the node they refer to.
- */
-#define VALID_PAGE(page) \
-({ unsigned int node = KVADDR_TO_NID(page); \
- ( (node < NR_NODES) && \
- ((unsigned)((page) - NODE_MEM_MAP(node)) < NODE_DATA(node)->node_size) ); \
-})
-
-#else
-
-#define PHYS_TO_NID(addr) (0)
-
-#endif
-#endif /* __ASM_ARCH_MEMORY_H */
+++ /dev/null
-/*
- * (C) Copyright 2003
- * David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/************************************************
- * NAME : s3c2400.h
- * Version : 31.3.2003
- *
- * Based on S3C2400X User's manual Rev 1.1
- ************************************************/
-
-#ifndef __S3C2400_H__
-#define __S3C2400_H__
-
-#define S3C24X0_UART_CHANNELS 2
-#define S3C24X0_SPI_CHANNELS 1
-#define PALETTE (0x14A00400) /* SJS */
-
-enum s3c24x0_uarts_nr {
- S3C24X0_UART0,
- S3C24X0_UART1,
-};
-
-/*S3C2400 device base addresses */
-#define S3C24X0_MEMCTL_BASE 0x14000000
-#define S3C24X0_USB_HOST_BASE 0x14200000
-#define S3C24X0_INTERRUPT_BASE 0x14400000
-#define S3C24X0_DMA_BASE 0x14600000
-#define S3C24X0_CLOCK_POWER_BASE 0x14800000
-#define S3C24X0_LCD_BASE 0x14A00000
-#define S3C24X0_UART_BASE 0x15000000
-#define S3C24X0_TIMER_BASE 0x15100000
-#define S3C24X0_USB_DEVICE_BASE 0x15200140
-#define S3C24X0_WATCHDOG_BASE 0x15300000
-#define S3C24X0_I2C_BASE 0x15400000
-#define S3C24X0_I2S_BASE 0x15508000
-#define S3C24X0_GPIO_BASE 0x15600000
-#define S3C24X0_RTC_BASE 0x15700000
-#define S3C24X0_ADC_BASE 0x15800000
-#define S3C24X0_SPI_BASE 0x15900000
-#define S3C2400_MMC_BASE 0x15A00000
-
-/* include common stuff */
-#include <asm/arch/s3c24x0.h>
-
-
-static inline struct s3c24x0_memctl *s3c24x0_get_base_memctl(void)
-{
- return (struct s3c24x0_memctl *)S3C24X0_MEMCTL_BASE;
-}
-
-static inline struct s3c24x0_usb_host *s3c24x0_get_base_usb_host(void)
-{
- return (struct s3c24x0_usb_host *)S3C24X0_USB_HOST_BASE;
-}
-
-static inline struct s3c24x0_interrupt *s3c24x0_get_base_interrupt(void)
-{
- return (struct s3c24x0_interrupt *)S3C24X0_INTERRUPT_BASE;
-}
-
-static inline struct s3c24x0_dmas *s3c24x0_get_base_dmas(void)
-{
- return (struct s3c24x0_dmas *)S3C24X0_DMA_BASE;
-}
-
-static inline struct s3c24x0_clock_power *s3c24x0_get_base_clock_power(void)
-{
- return (struct s3c24x0_clock_power *)S3C24X0_CLOCK_POWER_BASE;
-}
-
-static inline struct s3c24x0_lcd *s3c24x0_get_base_lcd(void)
-{
- return (struct s3c24x0_lcd *)S3C24X0_LCD_BASE;
-}
-
-static inline struct s3c24x0_uart
- *s3c24x0_get_base_uart(enum s3c24x0_uarts_nr n)
-{
- return (struct s3c24x0_uart *)(S3C24X0_UART_BASE + (n * 0x4000));
-}
-
-static inline struct s3c24x0_timers *s3c24x0_get_base_timers(void)
-{
- return (struct s3c24x0_timers *)S3C24X0_TIMER_BASE;
-}
-
-static inline struct s3c24x0_usb_device *s3c24x0_get_base_usb_device(void)
-{
- return (struct s3c24x0_usb_device *)S3C24X0_USB_DEVICE_BASE;
-}
-
-static inline struct s3c24x0_watchdog *s3c24x0_get_base_watchdog(void)
-{
- return (struct s3c24x0_watchdog *)S3C24X0_WATCHDOG_BASE;
-}
-
-static inline struct s3c24x0_i2c *s3c24x0_get_base_i2c(void)
-{
- return (struct s3c24x0_i2c *)S3C24X0_I2C_BASE;
-}
-
-static inline struct s3c24x0_i2s *s3c24x0_get_base_i2s(void)
-{
- return (struct s3c24x0_i2s *)S3C24X0_I2S_BASE;
-}
-
-static inline struct s3c24x0_gpio *s3c24x0_get_base_gpio(void)
-{
- return (struct s3c24x0_gpio *)S3C24X0_GPIO_BASE;
-}
-
-static inline struct s3c24x0_rtc *s3c24x0_get_base_rtc(void)
-{
- return (struct s3c24x0_rtc *)S3C24X0_RTC_BASE;
-}
-
-static inline struct s3c2400_adc *s3c2400_get_base_adc(void)
-{
- return (struct s3c2400_adc *)S3C24X0_ADC_BASE;
-}
-
-static inline struct s3c24x0_spi *s3c24x0_get_base_spi(void)
-{
- return (struct s3c24x0_spi *)S3C24X0_SPI_BASE;
-}
-
-static inline struct s3c2400_mmc *s3c2400_get_base_mmc(void)
-{
- return (struct s3c2400_mmc *)S3C2400_MMC_BASE;
-}
-
-#endif /*__S3C2400_H__*/
+++ /dev/null
-/*
- * (C) Copyright 2003
- * David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/************************************************
- * NAME : s3c2410.h
- * Version : 31.3.2003
- *
- * Based on S3C2410X User's manual Rev 1.1
- ************************************************/
-
-#ifndef __S3C2410_H__
-#define __S3C2410_H__
-
-#define S3C24X0_UART_CHANNELS 3
-#define S3C24X0_SPI_CHANNELS 2
-
-/* S3C2410 only supports 512 Byte HW ECC */
-#define S3C2410_ECCSIZE 512
-#define S3C2410_ECCBYTES 3
-
-enum s3c24x0_uarts_nr {
- S3C24X0_UART0,
- S3C24X0_UART1,
- S3C24X0_UART2
-};
-
-/* S3C2410 device base addresses */
-#define S3C24X0_MEMCTL_BASE 0x48000000
-#define S3C24X0_USB_HOST_BASE 0x49000000
-#define S3C24X0_INTERRUPT_BASE 0x4A000000
-#define S3C24X0_DMA_BASE 0x4B000000
-#define S3C24X0_CLOCK_POWER_BASE 0x4C000000
-#define S3C24X0_LCD_BASE 0x4D000000
-#define S3C2410_NAND_BASE 0x4E000000
-#define S3C24X0_UART_BASE 0x50000000
-#define S3C24X0_TIMER_BASE 0x51000000
-#define S3C24X0_USB_DEVICE_BASE 0x52000140
-#define S3C24X0_WATCHDOG_BASE 0x53000000
-#define S3C24X0_I2C_BASE 0x54000000
-#define S3C24X0_I2S_BASE 0x55000000
-#define S3C24X0_GPIO_BASE 0x56000000
-#define S3C24X0_RTC_BASE 0x57000000
-#define S3C2410_ADC_BASE 0x58000000
-#define S3C24X0_SPI_BASE 0x59000000
-#define S3C2410_SDI_BASE 0x5A000000
-
-
-/* include common stuff */
-#include <asm/arch/s3c24x0.h>
-
-
-static inline struct s3c24x0_memctl *s3c24x0_get_base_memctl(void)
-{
- return (struct s3c24x0_memctl *)S3C24X0_MEMCTL_BASE;
-}
-
-static inline struct s3c24x0_usb_host *s3c24x0_get_base_usb_host(void)
-{
- return (struct s3c24x0_usb_host *)S3C24X0_USB_HOST_BASE;
-}
-
-static inline struct s3c24x0_interrupt *s3c24x0_get_base_interrupt(void)
-{
- return (struct s3c24x0_interrupt *)S3C24X0_INTERRUPT_BASE;
-}
-
-static inline struct s3c24x0_dmas *s3c24x0_get_base_dmas(void)
-{
- return (struct s3c24x0_dmas *)S3C24X0_DMA_BASE;
-}
-
-static inline struct s3c24x0_clock_power *s3c24x0_get_base_clock_power(void)
-{
- return (struct s3c24x0_clock_power *)S3C24X0_CLOCK_POWER_BASE;
-}
-
-static inline struct s3c24x0_lcd *s3c24x0_get_base_lcd(void)
-{
- return (struct s3c24x0_lcd *)S3C24X0_LCD_BASE;
-}
-
-static inline struct s3c24x0_nand *s3c24x0_get_base_nand(void)
-{
- return (struct s3c24x0_nand *)S3C2410_NAND_BASE;
-}
-
-static inline struct s3c24x0_uart
- *s3c24x0_get_base_uart(enum s3c24x0_uarts_nr n)
-{
- return (struct s3c24x0_uart *)(S3C24X0_UART_BASE + (n * 0x4000));
-}
-
-static inline struct s3c24x0_timers *s3c24x0_get_base_timers(void)
-{
- return (struct s3c24x0_timers *)S3C24X0_TIMER_BASE;
-}
-
-static inline struct s3c24x0_usb_device *s3c24x0_get_base_usb_device(void)
-{
- return (struct s3c24x0_usb_device *)S3C24X0_USB_DEVICE_BASE;
-}
-
-static inline struct s3c24x0_watchdog *s3c24x0_get_base_watchdog(void)
-{
- return (struct s3c24x0_watchdog *)S3C24X0_WATCHDOG_BASE;
-}
-
-static inline struct s3c24x0_i2c *s3c24x0_get_base_i2c(void)
-{
- return (struct s3c24x0_i2c *)S3C24X0_I2C_BASE;
-}
-
-static inline struct s3c24x0_i2s *s3c24x0_get_base_i2s(void)
-{
- return (struct s3c24x0_i2s *)S3C24X0_I2S_BASE;
-}
-
-static inline struct s3c24x0_gpio *s3c24x0_get_base_gpio(void)
-{
- return (struct s3c24x0_gpio *)S3C24X0_GPIO_BASE;
-}
-
-static inline struct s3c24x0_rtc *s3c24x0_get_base_rtc(void)
-{
- return (struct s3c24x0_rtc *)S3C24X0_RTC_BASE;
-}
-
-static inline struct s3c2410_adc *s3c2410_get_base_adc(void)
-{
- return (struct s3c2410_adc *)S3C2410_ADC_BASE;
-}
-
-static inline struct s3c24x0_spi *s3c24x0_get_base_spi(void)
-{
- return (struct s3c24x0_spi *)S3C24X0_SPI_BASE;
-}
-
-static inline struct s3c24x0_sdi *s3c24x0_get_base_sdi(void)
-{
- return (struct s3c24x0_sdi *)S3C2410_SDI_BASE;
-}
-
-#endif /*__S3C2410_H__*/
+++ /dev/null
-/*
- * (C) Copyright 2003
- * David Mueller ELSOFT AG Switzerland. d.mueller@elsoft.ch
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/************************************************
- * NAME : s3c2440.h
- * Version : 31.3.2003
- *
- * Based on S3C2440 User's manual Rev x.x
- ************************************************/
-
-#ifndef __S3C2440_H__
-#define __S3C2440_H__
-
-#define S3C24X0_UART_CHANNELS 3
-#define S3C24X0_SPI_CHANNELS 2
-
-/* S3C2440 only supports 512 Byte HW ECC */
-#define S3C2440_ECCSIZE 512
-#define S3C2440_ECCBYTES 3
-
-enum s3c24x0_uarts_nr {
- S3C24X0_UART0,
- S3C24X0_UART1,
- S3C24X0_UART2
-};
-
-/* S3C2440 device base addresses */
-#define S3C24X0_MEMCTL_BASE 0x48000000
-#define S3C24X0_USB_HOST_BASE 0x49000000
-#define S3C24X0_INTERRUPT_BASE 0x4A000000
-#define S3C24X0_DMA_BASE 0x4B000000
-#define S3C24X0_CLOCK_POWER_BASE 0x4C000000
-#define S3C24X0_LCD_BASE 0x4D000000
-#define S3C2440_NAND_BASE 0x4E000000
-#define S3C24X0_UART_BASE 0x50000000
-#define S3C24X0_TIMER_BASE 0x51000000
-#define S3C24X0_USB_DEVICE_BASE 0x52000140
-#define S3C24X0_WATCHDOG_BASE 0x53000000
-#define S3C24X0_I2C_BASE 0x54000000
-#define S3C24X0_I2S_BASE 0x55000000
-#define S3C24X0_GPIO_BASE 0x56000000
-#define S3C24X0_RTC_BASE 0x57000000
-#define S3C2440_ADC_BASE 0x58000000
-#define S3C24X0_SPI_BASE 0x59000000
-#define S3C2440_SDI_BASE 0x5A000000
-
-/* include common stuff */
-#include <asm/arch/s3c24x0.h>
-
-static inline struct s3c24x0_memctl *s3c24x0_get_base_memctl(void)
-{
- return (struct s3c24x0_memctl *)S3C24X0_MEMCTL_BASE;
-}
-
-static inline struct s3c24x0_usb_host *s3c24x0_get_base_usb_host(void)
-{
- return (struct s3c24x0_usb_host *)S3C24X0_USB_HOST_BASE;
-}
-
-static inline struct s3c24x0_interrupt *s3c24x0_get_base_interrupt(void)
-{
- return (struct s3c24x0_interrupt *)S3C24X0_INTERRUPT_BASE;
-}
-
-static inline struct s3c24x0_dmas *s3c24x0_get_base_dmas(void)
-{
- return (struct s3c24x0_dmas *)S3C24X0_DMA_BASE;
-}
-
-static inline struct s3c24x0_clock_power *s3c24x0_get_base_clock_power(void)
-{
- return (struct s3c24x0_clock_power *)S3C24X0_CLOCK_POWER_BASE;
-}
-
-static inline struct s3c24x0_lcd *s3c24x0_get_base_lcd(void)
-{
- return (struct s3c24x0_lcd *)S3C24X0_LCD_BASE;
-}
-
-static inline struct s3c24x0_nand *s3c24x0_get_base_nand(void)
-{
- return (struct s3c24x0_nand *)S3C2440_NAND_BASE;
-}
-
-static inline struct s3c24x0_uart
- *s3c24x0_get_base_uart(enum s3c24x0_uarts_nr n)
-{
- return (struct s3c24x0_uart *)(S3C24X0_UART_BASE + (n * 0x4000));
-}
-
-static inline struct s3c24x0_timers *s3c24x0_get_base_timers(void)
-{
- return (struct s3c24x0_timers *)S3C24X0_TIMER_BASE;
-}
-
-static inline struct s3c24x0_usb_device *s3c24x0_get_base_usb_device(void)
-{
- return (struct s3c24x0_usb_device *)S3C24X0_USB_DEVICE_BASE;
-}
-
-static inline struct s3c24x0_watchdog *s3c24x0_get_base_watchdog(void)
-{
- return (struct s3c24x0_watchdog *)S3C24X0_WATCHDOG_BASE;
-}
-
-static inline struct s3c24x0_i2c *s3c24x0_get_base_i2c(void)
-{
- return (struct s3c24x0_i2c *)S3C24X0_I2C_BASE;
-}
-
-static inline struct s3c24x0_i2s *s3c24x0_get_base_i2s(void)
-{
- return (struct s3c24x0_i2s *)S3C24X0_I2S_BASE;
-}
-
-static inline struct s3c24x0_gpio *s3c24x0_get_base_gpio(void)
-{
- return (struct s3c24x0_gpio *)S3C24X0_GPIO_BASE;
-}
-
-static inline struct s3c24x0_rtc *s3c24x0_get_base_rtc(void)
-{
- return (struct s3c24x0_rtc *)S3C24X0_RTC_BASE;
-}
-
-static inline struct s3c2440_adc *s3c2440_get_base_adc(void)
-{
- return (struct s3c2440_adc *)S3C2440_ADC_BASE;
-}
-
-static inline struct s3c24x0_spi *s3c24x0_get_base_spi(void)
-{
- return (struct s3c24x0_spi *)S3C24X0_SPI_BASE;
-}
-
-static inline struct s3c24x0_sdi *s3c24x0_get_base_sdi(void)
-{
- return (struct s3c24x0_sdi *)S3C2440_SDI_BASE;
-}
-
-#endif /*__S3C2440_H__*/
+++ /dev/null
-/*
- * (C) Copyright 2003
- * David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/************************************************
- * NAME : s3c24x0.h
- * Version : 31.3.2003
- *
- * common stuff for SAMSUNG S3C24X0 SoC
- ************************************************/
-
-#ifndef __S3C24X0_H__
-#define __S3C24X0_H__
-
-/* Memory controller (see manual chapter 5) */
-struct s3c24x0_memctl {
- u32 bwscon;
- u32 bankcon[8];
- u32 refresh;
- u32 banksize;
- u32 mrsrb6;
- u32 mrsrb7;
-};
-
-
-/* USB HOST (see manual chapter 12) */
-struct s3c24x0_usb_host {
- u32 HcRevision;
- u32 HcControl;
- u32 HcCommonStatus;
- u32 HcInterruptStatus;
- u32 HcInterruptEnable;
- u32 HcInterruptDisable;
- u32 HcHCCA;
- u32 HcPeriodCuttendED;
- u32 HcControlHeadED;
- u32 HcControlCurrentED;
- u32 HcBulkHeadED;
- u32 HcBuldCurrentED;
- u32 HcDoneHead;
- u32 HcRmInterval;
- u32 HcFmRemaining;
- u32 HcFmNumber;
- u32 HcPeriodicStart;
- u32 HcLSThreshold;
- u32 HcRhDescriptorA;
- u32 HcRhDescriptorB;
- u32 HcRhStatus;
- u32 HcRhPortStatus1;
- u32 HcRhPortStatus2;
-};
-
-
-/* INTERRUPT (see manual chapter 14) */
-struct s3c24x0_interrupt {
- u32 srcpnd;
- u32 intmod;
- u32 intmsk;
- u32 priority;
- u32 intpnd;
- u32 intoffset;
-#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
- u32 subsrcpnd;
- u32 intsubmsk;
-#endif
-};
-
-
-/* DMAS (see manual chapter 8) */
-struct s3c24x0_dma {
- u32 disrc;
-#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
- u32 disrcc;
-#endif
- u32 didst;
-#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
- u32 didstc;
-#endif
- u32 dcon;
- u32 dstat;
- u32 dcsrc;
- u32 dcdst;
- u32 dmasktrig;
-#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) \
- || defined(CONFIG_S3C2440)
- u32 res[1];
-#endif
-};
-
-struct s3c24x0_dmas {
- struct s3c24x0_dma dma[4];
-};
-
-
-/* CLOCK & POWER MANAGEMENT (see S3C2400 manual chapter 6) */
-/* (see S3C2410 manual chapter 7) */
-struct s3c24x0_clock_power {
- u32 locktime;
- u32 mpllcon;
- u32 upllcon;
- u32 clkcon;
- u32 clkslow;
- u32 clkdivn;
-#if defined(CONFIG_S3C2440)
- u32 camdivn;
-#endif
-};
-
-
-/* LCD CONTROLLER (see manual chapter 15) */
-struct s3c24x0_lcd {
- u32 lcdcon1;
- u32 lcdcon2;
- u32 lcdcon3;
- u32 lcdcon4;
- u32 lcdcon5;
- u32 lcdsaddr1;
- u32 lcdsaddr2;
- u32 lcdsaddr3;
- u32 redlut;
- u32 greenlut;
- u32 bluelut;
- u32 res[8];
- u32 dithmode;
- u32 tpal;
-#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
- u32 lcdintpnd;
- u32 lcdsrcpnd;
- u32 lcdintmsk;
- u32 lpcsel;
-#endif
-};
-
-
-/* NAND FLASH (see manual chapter 6) */
-struct s3c24x0_nand {
- u32 nfconf;
-#ifndef CONFIG_S3C2410
- u32 nfcont;
-#endif
- u32 nfcmd;
- u32 nfaddr;
- u32 nfdata;
-#ifndef CONFIG_S3C2410
- u32 nfeccd0;
- u32 nfeccd1;
- u32 nfeccd;
-#endif
- u32 nfstat;
-#ifdef CONFIG_S3C2410
- u32 nfecc;
-#else
- u32 nfstat0;
- u32 nfstat1;
- u32 nfmecc0;
- u32 nfmecc1;
- u32 nfsecc;
- u32 nfsblk;
- u32 nfeblk;
-#endif
-};
-
-/* UART (see manual chapter 11) */
-struct s3c24x0_uart {
- u32 ulcon;
- u32 ucon;
- u32 ufcon;
- u32 umcon;
- u32 utrstat;
- u32 uerstat;
- u32 ufstat;
- u32 umstat;
-#ifdef __BIG_ENDIAN
- u8 res1[3];
- u8 utxh;
- u8 res2[3];
- u8 urxh;
-#else /* Little Endian */
- u8 utxh;
- u8 res1[3];
- u8 urxh;
- u8 res2[3];
-#endif
- u32 ubrdiv;
-};
-
-
-/* PWM TIMER (see manual chapter 10) */
-struct s3c24x0_timer {
- u32 tcntb;
- u32 tcmpb;
- u32 tcnto;
-};
-
-struct s3c24x0_timers {
- u32 tcfg0;
- u32 tcfg1;
- u32 tcon;
- struct s3c24x0_timer ch[4];
- u32 tcntb4;
- u32 tcnto4;
-};
-
-
-/* USB DEVICE (see manual chapter 13) */
-struct s3c24x0_usb_dev_fifos {
-#ifdef __BIG_ENDIAN
- u8 res[3];
- u8 ep_fifo_reg;
-#else /* little endian */
- u8 ep_fifo_reg;
- u8 res[3];
-#endif
-};
-
-struct s3c24x0_usb_dev_dmas {
-#ifdef __BIG_ENDIAN
- u8 res1[3];
- u8 ep_dma_con;
- u8 res2[3];
- u8 ep_dma_unit;
- u8 res3[3];
- u8 ep_dma_fifo;
- u8 res4[3];
- u8 ep_dma_ttc_l;
- u8 res5[3];
- u8 ep_dma_ttc_m;
- u8 res6[3];
- u8 ep_dma_ttc_h;
-#else /* little endian */
- u8 ep_dma_con;
- u8 res1[3];
- u8 ep_dma_unit;
- u8 res2[3];
- u8 ep_dma_fifo;
- u8 res3[3];
- u8 ep_dma_ttc_l;
- u8 res4[3];
- u8 ep_dma_ttc_m;
- u8 res5[3];
- u8 ep_dma_ttc_h;
- u8 res6[3];
-#endif
-};
-
-struct s3c24x0_usb_device {
-#ifdef __BIG_ENDIAN
- u8 res1[3];
- u8 func_addr_reg;
- u8 res2[3];
- u8 pwr_reg;
- u8 res3[3];
- u8 ep_int_reg;
- u8 res4[15];
- u8 usb_int_reg;
- u8 res5[3];
- u8 ep_int_en_reg;
- u8 res6[15];
- u8 usb_int_en_reg;
- u8 res7[3];
- u8 frame_num1_reg;
- u8 res8[3];
- u8 frame_num2_reg;
- u8 res9[3];
- u8 index_reg;
- u8 res10[7];
- u8 maxp_reg;
- u8 res11[3];
- u8 ep0_csr_in_csr1_reg;
- u8 res12[3];
- u8 in_csr2_reg;
- u8 res13[7];
- u8 out_csr1_reg;
- u8 res14[3];
- u8 out_csr2_reg;
- u8 res15[3];
- u8 out_fifo_cnt1_reg;
- u8 res16[3];
- u8 out_fifo_cnt2_reg;
-#else /* little endian */
- u8 func_addr_reg;
- u8 res1[3];
- u8 pwr_reg;
- u8 res2[3];
- u8 ep_int_reg;
- u8 res3[15];
- u8 usb_int_reg;
- u8 res4[3];
- u8 ep_int_en_reg;
- u8 res5[15];
- u8 usb_int_en_reg;
- u8 res6[3];
- u8 frame_num1_reg;
- u8 res7[3];
- u8 frame_num2_reg;
- u8 res8[3];
- u8 index_reg;
- u8 res9[7];
- u8 maxp_reg;
- u8 res10[7];
- u8 ep0_csr_in_csr1_reg;
- u8 res11[3];
- u8 in_csr2_reg;
- u8 res12[3];
- u8 out_csr1_reg;
- u8 res13[7];
- u8 out_csr2_reg;
- u8 res14[3];
- u8 out_fifo_cnt1_reg;
- u8 res15[3];
- u8 out_fifo_cnt2_reg;
- u8 res16[3];
-#endif /* __BIG_ENDIAN */
- struct s3c24x0_usb_dev_fifos fifo[5];
- struct s3c24x0_usb_dev_dmas dma[5];
-};
-
-
-/* WATCH DOG TIMER (see manual chapter 18) */
-struct s3c24x0_watchdog {
- u32 wtcon;
- u32 wtdat;
- u32 wtcnt;
-};
-
-/* IIS (see manual chapter 21) */
-struct s3c24x0_i2s {
-#ifdef __BIG_ENDIAN
- u16 res1;
- u16 iiscon;
- u16 res2;
- u16 iismod;
- u16 res3;
- u16 iispsr;
- u16 res4;
- u16 iisfcon;
- u16 res5;
- u16 iisfifo;
-#else /* little endian */
- u16 iiscon;
- u16 res1;
- u16 iismod;
- u16 res2;
- u16 iispsr;
- u16 res3;
- u16 iisfcon;
- u16 res4;
- u16 iisfifo;
- u16 res5;
-#endif
-};
-
-
-/* I/O PORT (see manual chapter 9) */
-struct s3c24x0_gpio {
-#ifdef CONFIG_S3C2400
- u32 pacon;
- u32 padat;
-
- u32 pbcon;
- u32 pbdat;
- u32 pbup;
-
- u32 pccon;
- u32 pcdat;
- u32 pcup;
-
- u32 pdcon;
- u32 pddat;
- u32 pdup;
-
- u32 pecon;
- u32 pedat;
- u32 peup;
-
- u32 pfcon;
- u32 pfdat;
- u32 pfup;
-
- u32 pgcon;
- u32 pgdat;
- u32 pgup;
-
- u32 opencr;
-
- u32 misccr;
- u32 extint;
-#endif
-#ifdef CONFIG_S3C2410
- u32 gpacon;
- u32 gpadat;
- u32 res1[2];
- u32 gpbcon;
- u32 gpbdat;
- u32 gpbup;
- u32 res2;
- u32 gpccon;
- u32 gpcdat;
- u32 gpcup;
- u32 res3;
- u32 gpdcon;
- u32 gpddat;
- u32 gpdup;
- u32 res4;
- u32 gpecon;
- u32 gpedat;
- u32 gpeup;
- u32 res5;
- u32 gpfcon;
- u32 gpfdat;
- u32 gpfup;
- u32 res6;
- u32 gpgcon;
- u32 gpgdat;
- u32 gpgup;
- u32 res7;
- u32 gphcon;
- u32 gphdat;
- u32 gphup;
- u32 res8;
-
- u32 misccr;
- u32 dclkcon;
- u32 extint0;
- u32 extint1;
- u32 extint2;
- u32 eintflt0;
- u32 eintflt1;
- u32 eintflt2;
- u32 eintflt3;
- u32 eintmask;
- u32 eintpend;
- u32 gstatus0;
- u32 gstatus1;
- u32 gstatus2;
- u32 gstatus3;
- u32 gstatus4;
-#endif
-#if defined(CONFIG_S3C2440)
- u32 gpacon;
- u32 gpadat;
- u32 res1[2];
- u32 gpbcon;
- u32 gpbdat;
- u32 gpbup;
- u32 res2;
- u32 gpccon;
- u32 gpcdat;
- u32 gpcup;
- u32 res3;
- u32 gpdcon;
- u32 gpddat;
- u32 gpdup;
- u32 res4;
- u32 gpecon;
- u32 gpedat;
- u32 gpeup;
- u32 res5;
- u32 gpfcon;
- u32 gpfdat;
- u32 gpfup;
- u32 res6;
- u32 gpgcon;
- u32 gpgdat;
- u32 gpgup;
- u32 res7;
- u32 gphcon;
- u32 gphdat;
- u32 gphup;
- u32 res8;
-
- u32 misccr;
- u32 dclkcon;
- u32 extint0;
- u32 extint1;
- u32 extint2;
- u32 eintflt0;
- u32 eintflt1;
- u32 eintflt2;
- u32 eintflt3;
- u32 eintmask;
- u32 eintpend;
- u32 gstatus0;
- u32 gstatus1;
- u32 gstatus2;
- u32 gstatus3;
- u32 gstatus4;
-
- u32 res9;
- u32 dsc0;
- u32 dsc1;
- u32 mslcon;
- u32 gpjcon;
- u32 gpjdat;
- u32 gpjup;
- u32 res10;
-#endif
-};
-
-
-/* RTC (see manual chapter 17) */
-struct s3c24x0_rtc {
-#ifdef __BIG_ENDIAN
- u8 res1[67];
- u8 rtccon;
- u8 res2[3];
- u8 ticnt;
- u8 res3[11];
- u8 rtcalm;
- u8 res4[3];
- u8 almsec;
- u8 res5[3];
- u8 almmin;
- u8 res6[3];
- u8 almhour;
- u8 res7[3];
- u8 almdate;
- u8 res8[3];
- u8 almmon;
- u8 res9[3];
- u8 almyear;
- u8 res10[3];
- u8 rtcrst;
- u8 res11[3];
- u8 bcdsec;
- u8 res12[3];
- u8 bcdmin;
- u8 res13[3];
- u8 bcdhour;
- u8 res14[3];
- u8 bcddate;
- u8 res15[3];
- u8 bcdday;
- u8 res16[3];
- u8 bcdmon;
- u8 res17[3];
- u8 bcdyear;
-#else /* little endian */
- u8 res0[64];
- u8 rtccon;
- u8 res1[3];
- u8 ticnt;
- u8 res2[11];
- u8 rtcalm;
- u8 res3[3];
- u8 almsec;
- u8 res4[3];
- u8 almmin;
- u8 res5[3];
- u8 almhour;
- u8 res6[3];
- u8 almdate;
- u8 res7[3];
- u8 almmon;
- u8 res8[3];
- u8 almyear;
- u8 res9[3];
- u8 rtcrst;
- u8 res10[3];
- u8 bcdsec;
- u8 res11[3];
- u8 bcdmin;
- u8 res12[3];
- u8 bcdhour;
- u8 res13[3];
- u8 bcddate;
- u8 res14[3];
- u8 bcdday;
- u8 res15[3];
- u8 bcdmon;
- u8 res16[3];
- u8 bcdyear;
- u8 res17[3];
-#endif
-};
-
-
-/* ADC (see manual chapter 16) */
-struct s3c2400_adc {
- u32 adccon;
- u32 adcdat;
-};
-
-
-/* ADC (see manual chapter 16) */
-struct s3c2410_adc {
- u32 adccon;
- u32 adctsc;
- u32 adcdly;
- u32 adcdat0;
- u32 adcdat1;
-};
-
-
-/* SPI (see manual chapter 22) */
-struct s3c24x0_spi_channel {
- u8 spcon;
- u8 res1[3];
- u8 spsta;
- u8 res2[3];
- u8 sppin;
- u8 res3[3];
- u8 sppre;
- u8 res4[3];
- u8 sptdat;
- u8 res5[3];
- u8 sprdat;
- u8 res6[3];
- u8 res7[16];
-};
-
-struct s3c24x0_spi {
- struct s3c24x0_spi_channel ch[S3C24X0_SPI_CHANNELS];
-};
-
-
-/* MMC INTERFACE (see S3C2400 manual chapter 19) */
-struct s3c2400_mmc {
-#ifdef __BIG_ENDIAN
- u8 res1[3];
- u8 mmcon;
- u8 res2[3];
- u8 mmcrr;
- u8 res3[3];
- u8 mmfcon;
- u8 res4[3];
- u8 mmsta;
- u16 res5;
- u16 mmfsta;
- u8 res6[3];
- u8 mmpre;
- u16 res7;
- u16 mmlen;
- u8 res8[3];
- u8 mmcr7;
- u32 mmrsp[4];
- u8 res9[3];
- u8 mmcmd0;
- u32 mmcmd1;
- u16 res10;
- u16 mmcr16;
- u8 res11[3];
- u8 mmdat;
-#else
- u8 mmcon;
- u8 res1[3];
- u8 mmcrr;
- u8 res2[3];
- u8 mmfcon;
- u8 res3[3];
- u8 mmsta;
- u8 res4[3];
- u16 mmfsta;
- u16 res5;
- u8 mmpre;
- u8 res6[3];
- u16 mmlen;
- u16 res7;
- u8 mmcr7;
- u8 res8[3];
- u32 mmrsp[4];
- u8 mmcmd0;
- u8 res9[3];
- u32 mmcmd1;
- u16 mmcr16;
- u16 res10;
- u8 mmdat;
- u8 res11[3];
-#endif
-};
-
-
-/* SD INTERFACE (see S3C2410 manual chapter 19) */
-struct s3c24x0_sdi {
- u32 sdicon;
- u32 sdipre;
- u32 sdicarg;
- u32 sdiccon;
- u32 sdicsta;
- u32 sdirsp0;
- u32 sdirsp1;
- u32 sdirsp2;
- u32 sdirsp3;
- u32 sdidtimer;
- u32 sdibsize;
- u32 sdidcon;
- u32 sdidcnt;
- u32 sdidsta;
- u32 sdifsta;
-#ifdef CONFIG_S3C2410
- u32 sdidat;
- u32 sdiimsk;
-#else
- u32 sdiimsk;
- u32 sdidat;
-#endif
-};
-
-#ifdef CONFIG_CMD_MMC
-#include <mmc.h>
-int s3cmmc_initialize(bd_t *bis, int (*getcd)(struct mmc *),
- int (*getwp)(struct mmc *));
-#endif
-
-#endif /*__S3C24X0_H__*/
+++ /dev/null
-/*
- * (C) Copyright 2009
- * Kevin Morfitt, Fearnside Systems Ltd, <kevin.morfitt@fearnside-systems.co.uk>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifdef CONFIG_S3C2400
- #include <asm/arch/s3c2400.h>
-#elif defined CONFIG_S3C2410
- #include <asm/arch/s3c2410.h>
-#elif defined CONFIG_S3C2440
- #include <asm/arch/s3c2440.h>
-#else
- #error Please define the s3c24x0 cpu type
-#endif
projects / u-boot.git / commitdiff