mx51evk: Remove unused mx51evk_video.c file

Since commit 1fa43cad8625 ("video: Drop references to CONFIG_VIDEO et al")
the mx51evk_video.c is no longer used.

Remove the unused file.

Signed-off-by: Fabio Estevam <festevam@denx.de>

diff --git a/board/freescale/mx51evk/mx51evk_video.c b/board/freescale/mx51evk/mx51evk_video.c
deleted file mode 100644 (file)
index 3715c5d..0000000
--- a/board/freescale/mx51evk/mx51evk_video.c
+++ /dev/null
@@ -1,98 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2012 Freescale Semiconductor, Inc.
- * Fabio Estevam <fabio.estevam@freescale.com>
- */
-
-#include <common.h>
-#include <env.h>
-#include <linux/list.h>
-#include <asm/gpio.h>
-#include <asm/arch/iomux-mx51.h>
-#include <linux/fb.h>
-#include <ipu_pixfmt.h>
-
-#define MX51EVK_LCD_3V3                IMX_GPIO_NR(4, 9)
-#define MX51EVK_LCD_5V         IMX_GPIO_NR(4, 10)
-#define MX51EVK_LCD_BACKLIGHT  IMX_GPIO_NR(3, 4)
-
-static struct fb_videomode const claa_wvga = {
-       .name           = "CLAA07LC0ACW",
-       .refresh        = 57,
-       .xres           = 800,
-       .yres           = 480,
-       .pixclock       = 37037,
-       .left_margin    = 40,
-       .right_margin   = 60,
-       .upper_margin   = 10,
-       .lower_margin   = 10,
-       .hsync_len      = 20,
-       .vsync_len      = 10,
-       .sync           = 0,
-       .vmode          = FB_VMODE_NONINTERLACED
-};
-
-static struct fb_videomode const dvi = {
-       .name           = "DVI panel",
-       .refresh        = 60,
-       .xres           = 1024,
-       .yres           = 768,
-       .pixclock       = 15385,
-       .left_margin    = 220,
-       .right_margin   = 40,
-       .upper_margin   = 21,
-       .lower_margin   = 7,
-       .hsync_len      = 60,
-       .vsync_len      = 10,
-       .sync           = 0,
-       .vmode          = FB_VMODE_NONINTERLACED
-};
-
-void setup_iomux_lcd(void)
-{
-       /* DI2_PIN15 */
-       imx_iomux_v3_setup_pad(MX51_PAD_DI_GP4__DI2_PIN15);
-
-       /* Pad settings for DI2_DISP_CLK */
-       imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK,
-                           PAD_CTL_PKE | PAD_CTL_DSE_MAX | PAD_CTL_SRE_SLOW));
-
-       /* Turn on 3.3V voltage for LCD */
-       imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_CSI2_D12__GPIO4_9,
-                                               NO_PAD_CTRL));
-       gpio_direction_output(MX51EVK_LCD_3V3, 1);
-
-       /* Turn on 5V voltage for LCD */
-       imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_CSI2_D13__GPIO4_10,
-                                               NO_PAD_CTRL));
-       gpio_direction_output(MX51EVK_LCD_5V, 1);
-
-       /* Turn on GPIO backlight */
-       imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_DI1_D1_CS__GPIO3_4,
-                                               NO_PAD_CTRL));
-       gpio_direction_output(MX51EVK_LCD_BACKLIGHT, 1);
-}
-
-int board_video_skip(void)
-{
-       int ret;
-       char const *e = env_get("panel");
-
-       if (e) {
-               if (strcmp(e, "claa") == 0) {
-                       ret = ipuv3_fb_init(&claa_wvga, 1, IPU_PIX_FMT_RGB565);
-                       if (ret)
-                               printf("claa cannot be configured: %d\n", ret);
-                       return ret;
-               }
-       }
-
-       /*
-        * 'panel' env variable not found or has different value than 'claa'
-        *  Defaulting to dvi output.
-        */
-       ret = ipuv3_fb_init(&dvi, 0, IPU_PIX_FMT_RGB24);
-       if (ret)
-               printf("dvi cannot be configured: %d\n", ret);
-       return ret;
-}