arm: mvebu: turris_mox: Use DM registered MDIO

In order to be able to get rid of the non-DM MDIO bus registered in
mvneta driver, start using the DM registered one in Turris MOX board
code.

This also allows us to drop the hack introduced in MOX' -u-boot.dtsi
file.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>

diff --git a/arch/arm/dts/armada-3720-turris-mox-u-boot.dtsi b/arch/arm/dts/armada-3720-turris-mox-u-boot.dtsi
index 28a36a6103569b9214e9fc92a68ebf0c2bbf0a66..71d5e70ca45bb352ffa6787d286b7da56dfd5fd1 100644 (file)
--- a/arch/arm/dts/armada-3720-turris-mox-u-boot.dtsi
+++ b/arch/arm/dts/armada-3720-turris-mox-u-boot.dtsi
@@ -3,25 +3,6 @@
  * 2022 by Marek Behún <kabel@kernel.org>
  */
 
-/ {
-       mdio {
-               #address-cells = <1>;
-               #size-cells = <0>;
-
-               old_binding_phy1: ethernet-phy@1 {
-                       reg = <1>;
-               };
-       };
-};
-
-&eth0 {
-       pinctrl-0 = <&rgmii_pins>, <&smi_pins>;
-       /delete-property/ phy-handle;
-       phy = <&old_binding_phy1>;
-};
-
-/delete-node/ &mdio;
-
 &usb3 {
        vbus-supply = <&exp_usb3_vbus>;
 };

diff --git a/board/CZ.NIC/turris_mox/turris_mox.c b/board/CZ.NIC/turris_mox/turris_mox.c
index 9702d1fc7822bc07af9afb40f786419e57516e11..a4738b3a3ca3339a17de71fe96bf9df4684aac64 100644 (file)
--- a/board/CZ.NIC/turris_mox/turris_mox.c
+++ b/board/CZ.NIC/turris_mox/turris_mox.c
@@ -13,6 +13,7 @@
 #include <button.h>
 #include <clk.h>
 #include <dm.h>
+#include <dm/of_extra.h>
 #include <env.h>
 #include <fdt_support.h>
 #include <init.h>
@@ -216,35 +217,35 @@ static int mox_get_topology(const u8 **ptopology, int *psize, int *pis_sd)
 #define SW_SMI_CMD_R(d, r)     (0x9800 | (((d) & 0x1f) << 5) | ((r) & 0x1f))
 #define SW_SMI_CMD_W(d, r)     (0x9400 | (((d) & 0x1f) << 5) | ((r) & 0x1f))
 
-static int sw_multi_read(struct mii_dev *bus, int sw, int dev, int reg)
+static int sw_multi_read(struct udevice *bus, int sw, int dev, int reg)
 {
-       bus->write(bus, sw, 0, 0, SW_SMI_CMD_R(dev, reg));
+       dm_mdio_write(bus, sw, MDIO_DEVAD_NONE, 0, SW_SMI_CMD_R(dev, reg));
        mdelay(5);
-       return bus->read(bus, sw, 0, 1);
+       return dm_mdio_read(bus, sw, MDIO_DEVAD_NONE, 1);
 }
 
-static void sw_multi_write(struct mii_dev *bus, int sw, int dev, int reg,
+static void sw_multi_write(struct udevice *bus, int sw, int dev, int reg,
                           u16 val)
 {
-       bus->write(bus, sw, 0, 1, val);
-       bus->write(bus, sw, 0, 0, SW_SMI_CMD_W(dev, reg));
+       dm_mdio_write(bus, sw, MDIO_DEVAD_NONE, 1, val);
+       dm_mdio_write(bus, sw, MDIO_DEVAD_NONE, 0, SW_SMI_CMD_W(dev, reg));
        mdelay(5);
 }
 
-static int sw_scratch_read(struct mii_dev *bus, int sw, int reg)
+static int sw_scratch_read(struct udevice *bus, int sw, int reg)
 {
        sw_multi_write(bus, sw, 0x1c, 0x1a, (reg & 0x7f) << 8);
        return sw_multi_read(bus, sw, 0x1c, 0x1a) & 0xff;
 }
 
-static void sw_led_write(struct mii_dev *bus, int sw, int port, int reg,
+static void sw_led_write(struct udevice *bus, int sw, int port, int reg,
                         u16 val)
 {
        sw_multi_write(bus, sw, port, 0x16, 0x8000 | ((reg & 7) << 12)
                                            | (val & 0x7ff));
 }
 
-static void sw_blink_leds(struct mii_dev *bus, int peridot, int topaz)
+static void sw_blink_leds(struct udevice *bus, int peridot, int topaz)
 {
        int i, p;
        struct {
@@ -275,7 +276,7 @@ static void sw_blink_leds(struct mii_dev *bus, int peridot, int topaz)
        }
 }
 
-static void check_switch_address(struct mii_dev *bus, int addr)
+static void check_switch_address(struct udevice *bus, int addr)
 {
        if (sw_scratch_read(bus, addr, 0x70) >> 3 != addr)
                printf("Check of switch MDIO address failed for 0x%02x\n",
@@ -374,36 +375,22 @@ static void mox_phy_modify(struct phy_device *phydev, int page, int reg,
 static void mox_phy_leds_start_blinking(void)
 {
        struct phy_device *phydev;
-       struct mii_dev *bus;
-       const char *node_name;
-       int node;
+       ofnode phy_node;
 
-       node = fdt_path_offset(gd->fdt_blob, "ethernet0");
-       if (node < 0) {
-               printf("Cannot get eth0!\n");
-               return;
-       }
+       phy_node = ofnode_get_phy_node(ofnode_path("ethernet0"));
+       if (!ofnode_valid(phy_node))
+               goto err;
 
-       node_name = fdt_get_name(gd->fdt_blob, node, NULL);
-       if (!node_name) {
-               printf("Cannot get eth0 node name!\n");
-               return;
-       }
-
-       bus = miiphy_get_dev_by_name(node_name);
-       if (!bus) {
-               printf("Cannot get MDIO bus device!\n");
-               return;
-       }
-
-       phydev = phy_find_by_mask(bus, BIT(1));
-       if (!phydev) {
-               printf("Cannot get ethernet PHY!\n");
-               return;
-       }
+       phydev = dm_phy_find_by_ofnode(phy_node);
+       if (!phydev)
+               goto err;
 
        mox_phy_modify(phydev, 3, 0x12, 0x700, 0x400);
        mox_phy_modify(phydev, 3, 0x10, 0xff, 0xbb);
+
+       return;
+err:
+       printf("Cannot get ethernet PHY!\n");
 }
 
 static bool read_reset_button(void)
@@ -611,6 +598,26 @@ int show_board_info(void)
        return 0;
 }
 
+static struct udevice *mox_mdio_bus(void)
+{
+       struct udevice *bus;
+       ofnode node;
+
+       node = ofnode_by_compatible(ofnode_null(), "marvell,orion-mdio");
+       if (!ofnode_valid(node))
+               goto err;
+
+       dm_mdio_probe_devices();
+
+       if (uclass_get_device_by_ofnode(UCLASS_MDIO, node, &bus))
+               goto err;
+
+       return bus;
+err:
+       printf("Cannot get MDIO bus device!\n");
+       return NULL;
+}
+
 int last_stage_init(void)
 {
        struct gpio_desc reset_gpio = {};
@@ -636,16 +643,9 @@ int last_stage_init(void)
         * 0x70 of Peridot (and potentially Topaz) modules
         */
        if (peridot || topaz) {
-               struct mii_dev *bus;
-               const char *node_name;
-               int node;
+               struct udevice *bus = mox_mdio_bus();
 
-               node = fdt_path_offset(gd->fdt_blob, "ethernet0");
-               node_name = (node >= 0) ? fdt_get_name(gd->fdt_blob, node, NULL) : NULL;
-               bus = node_name ? miiphy_get_dev_by_name(node_name) : NULL;
-               if (!bus) {
-                       printf("Cannot get MDIO bus device!\n");
-               } else {
+               if (bus) {
                        int i;
 
                        for (i = 0; i < peridot; ++i)